Re: [PATCH 02/11] memory: atmel-ebi: add generic name for ebi regmap

[Alexandre Belloni <alexandre.belloni@bootlin.com>]

On 13/02/2019 08:59:48+0000, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> The sam9x60 board defines the CCFG_EBICSA register under SFR,
> and not as a MATRIX register, as previous boards do. Add a
> more generic name for the EBI regmap as a prerequisite for
> sam9x60 ebi support.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  drivers/memory/atmel-ebi.c | 23 ++++++++++++++++-------
>  1 file changed, 16 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
> index c3748b414c27..b45914cfa212 100644
> --- a/drivers/memory/atmel-ebi.c
> +++ b/drivers/memory/atmel-ebi.c
> @@ -36,6 +36,7 @@ struct atmel_ebi_dev {
>  struct atmel_ebi_caps {
>  	unsigned int available_cs;
>  	unsigned int ebi_csa_offs;
> +	const char *regmap_name;
>  	void (*get_config)(struct atmel_ebi_dev *ebid,
>  			   struct atmel_ebi_dev_config *conf);
>  	int (*xlate_config)(struct atmel_ebi_dev *ebid,
> @@ -47,7 +48,7 @@ struct atmel_ebi_caps {
>  
>  struct atmel_ebi {
>  	struct clk *clk;
> -	struct regmap *matrix;
> +	struct regmap *regmap;
>  	struct  {
>  		struct regmap *regmap;
>  		struct clk *clk;
> @@ -357,7 +358,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
>  		 * one "atmel,smc-" property is present.
>  		 */
>  		if (ebi->caps->ebi_csa_offs && apply)
> -			regmap_update_bits(ebi->matrix,
> +			regmap_update_bits(ebi->regmap,
>  					   ebi->caps->ebi_csa_offs,
>  					   BIT(cs), 0);
>  
> @@ -372,6 +373,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
>  static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
>  	.available_cs = 0xff,
>  	.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -380,6 +382,7 @@ static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
>  static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
>  	.available_cs = 0xff,
>  	.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -388,6 +391,7 @@ static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
>  static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
>  	.available_cs = 0x3f,
>  	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -396,6 +400,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
>  static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
>  	.available_cs = 0x7,
>  	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -404,6 +409,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
>  static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
>  	.available_cs = 0x3f,
>  	.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -412,6 +418,7 @@ static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
>  static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
>  	.available_cs = 0x3f,
>  	.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -420,6 +427,7 @@ static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
>  static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
>  	.available_cs = 0x3f,
>  	.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
> +	.regmap_name = "atmel,matrix",
>  	.get_config = at91sam9_ebi_get_config,
>  	.xlate_config = atmel_ebi_xslate_smc_config,
>  	.apply_config = at91sam9_ebi_apply_config,
> @@ -543,13 +551,14 @@ static int atmel_ebi_probe(struct platform_device *pdev)
>  
>  	/*
>  	 * The sama5d3 does not provide an EBICSA register and thus does need
> -	 * to access the matrix registers.
> +	 * to access it.
>  	 */
>  	if (ebi->caps->ebi_csa_offs) {
> -		ebi->matrix =
> -			syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
> -		if (IS_ERR(ebi->matrix))
> -			return PTR_ERR(ebi->matrix);
> +		ebi->regmap =
> +			syscon_regmap_lookup_by_phandle(np,
> +							ebi->caps->regmap_name);
> +		if (IS_ERR(ebi->regmap))
> +			return PTR_ERR(ebi->regmap);
>  	}
>  
>  	ret = of_property_read_u32(np, "#address-cells", &val);
> -- 
> 2.9.5
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/