All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare via amd-gfx <amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
To: David Francis <David.Francis-5C7GfCeVMHo@public.gmane.org>
Cc: intel-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	harry.wentland-5C7GfCeVMHo@public.gmane.org,
	amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	nikola.cornij-5C7GfCeVMHo@public.gmane.org
Subject: Re: [PATCH 2/3] drm/dsc: Add native 420 and 422 support to compute_rc_params
Date: Wed, 13 Feb 2019 10:49:50 -0800	[thread overview]
Message-ID: <20190213184950.GB11553@intel.com> (raw)
In-Reply-To: <20190213144536.21661-3-David.Francis-5C7GfCeVMHo@public.gmane.org>

On Wed, Feb 13, 2019 at 09:45:35AM -0500, David Francis wrote:
> Native 420 and 422 transfer modes are new in DSC1.2
> 
> In these modes, each two pixels of a slice are treated as one
> pixel, so the slice width is half as large (round down) for
> the purposes of calucating the groups per line and chunk size
> in bytes
> 
> In native 422 mode, each pixel has four components, so the
> mux component of a group is larger by one additional mux word
> and one additional component
> 
> Now that there is native 422 support, the configuration option
> previously called enable422 is renamed to simple_422 to avoid
> confusion
> 
> Signed-off-by: David Francis <David.Francis@amd.com>

This looks good and verified that the DSC 1.2 spec actually renames it
as simple_422.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

Manasi

> ---
>  drivers/gpu/drm/drm_dsc.c         | 31 +++++++++++++++++++++++--------
>  drivers/gpu/drm/i915/intel_vdsc.c |  4 ++--
>  include/drm/drm_dsc.h             |  4 ++--
>  3 files changed, 27 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_dsc.c b/drivers/gpu/drm/drm_dsc.c
> index 4b0e3c9c3ff8..9e675dd39a44 100644
> --- a/drivers/gpu/drm/drm_dsc.c
> +++ b/drivers/gpu/drm/drm_dsc.c
> @@ -77,7 +77,7 @@ void drm_dsc_pps_infoframe_pack(struct drm_dsc_pps_infoframe *pps_sdp,
>  		((dsc_cfg->bits_per_pixel & DSC_PPS_BPP_HIGH_MASK) >>
>  		 DSC_PPS_MSB_SHIFT) |
>  		dsc_cfg->vbr_enable << DSC_PPS_VBR_EN_SHIFT |
> -		dsc_cfg->enable422 << DSC_PPS_SIMPLE422_SHIFT |
> +		dsc_cfg->simple_422 << DSC_PPS_SIMPLE422_SHIFT |
>  		dsc_cfg->convert_rgb << DSC_PPS_CONVERT_RGB_SHIFT |
>  		dsc_cfg->block_pred_enable << DSC_PPS_BLOCK_PRED_EN_SHIFT;
>  
> @@ -246,19 +246,34 @@ int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg)
>  	unsigned long final_scale = 0;
>  	unsigned long rbs_min = 0;
>  
> -	/* Number of groups used to code each line of a slice */
> -	groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width,
> -				       DSC_RC_PIXELS_PER_GROUP);
> +	if (vdsc_cfg->native_420 || vdsc_cfg->native_422) {
> +		/* Number of groups used to code each line of a slice */
> +		groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width / 2,
> +					       DSC_RC_PIXELS_PER_GROUP);
>  
> -	/* chunksize in Bytes */
> -	vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width *
> -						  vdsc_cfg->bits_per_pixel,
> -						  (8 * 16));
> +		/* chunksize in Bytes */
> +		vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width / 2 *
> +							  vdsc_cfg->bits_per_pixel,
> +							  (8 * 16));
> +	} else {
> +		/* Number of groups used to code each line of a slice */
> +		groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width,
> +					       DSC_RC_PIXELS_PER_GROUP);
> +
> +		/* chunksize in Bytes */
> +		vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width *
> +							  vdsc_cfg->bits_per_pixel,
> +							  (8 * 16));
> +	}
>  
>  	if (vdsc_cfg->convert_rgb)
>  		num_extra_mux_bits = 3 * (vdsc_cfg->mux_word_size +
>  					  (4 * vdsc_cfg->bits_per_component + 4)
>  					  - 2);
> +	else if (vdsc_cfg->native_422)
> +		num_extra_mux_bits = 4 * vdsc_cfg->mux_word_size +
> +			(4 * vdsc_cfg->bits_per_component + 4) +
> +			3 * (4 * vdsc_cfg->bits_per_component) - 2;
>  	else
>  		num_extra_mux_bits = 3 * vdsc_cfg->mux_word_size +
>  			(4 * vdsc_cfg->bits_per_component + 4) +
> diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
> index c76cec8bfb74..7702c5c8b3f2 100644
> --- a/drivers/gpu/drm/i915/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/intel_vdsc.c
> @@ -369,7 +369,7 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
>  			DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
>  
>  	/* Gen 11 does not support YCbCr */
> -	vdsc_cfg->enable422 = false;
> +	vdsc_cfg->simple_422 = false;
>  	/* Gen 11 does not support VBR */
>  	vdsc_cfg->vbr_enable = false;
>  	vdsc_cfg->block_pred_enable =
> @@ -496,7 +496,7 @@ static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
>  		pps_val |= DSC_BLOCK_PREDICTION;
>  	if (vdsc_cfg->convert_rgb)
>  		pps_val |= DSC_COLOR_SPACE_CONVERSION;
> -	if (vdsc_cfg->enable422)
> +	if (vdsc_cfg->simple_422)
>  		pps_val |= DSC_422_ENABLE;
>  	if (vdsc_cfg->vbr_enable)
>  		pps_val |= DSC_VBR_ENABLE;
> diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h
> index ad43494f1cc8..4e55e37943d7 100644
> --- a/include/drm/drm_dsc.h
> +++ b/include/drm/drm_dsc.h
> @@ -70,10 +70,10 @@ struct drm_dsc_config {
>  	/* Slice Height */
>  	u16 slice_height;
>  	/*
> -	 * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens
> +	 * Simple 4:2:2 mode (from PPS, 4:2:2 conversion happens
>  	 * outside of DSC encode/decode algorithm)
>  	 */
> -	bool enable422;
> +	bool simple_422;
>  	/* Picture Width */
>  	u16 pic_width;
>  	/* Picture Height */
> -- 
> 2.17.1
> 
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  parent reply	other threads:[~2019-02-13 18:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-13 14:45 [PATCH 0/3] Make DRM DSC helpers more generally usable David Francis
     [not found] ` <20190213144536.21661-1-David.Francis-5C7GfCeVMHo@public.gmane.org>
2019-02-13 14:45   ` [PATCH 1/3] drm/i915: Move dsc rate params compute into drm David Francis
2019-02-13 15:26     ` Wentland, Harry
2019-02-13 18:36     ` Manasi Navare
2019-02-14  3:31     ` [Intel-gfx] " kbuild test robot via dri-devel
2019-02-14 11:09     ` Dan Carpenter via dri-devel
2019-02-13 14:45   ` [PATCH 2/3] drm/dsc: Add native 420 and 422 support to compute_rc_params David Francis
     [not found]     ` <20190213144536.21661-3-David.Francis-5C7GfCeVMHo@public.gmane.org>
2019-02-13 15:27       ` Wentland, Harry
2019-02-13 18:49       ` Manasi Navare via amd-gfx [this message]
2019-02-13 14:45   ` [PATCH 3/3] drm/dsc: Change infoframe_pack to payload_pack David Francis
2019-02-13 15:35     ` Wentland, Harry
     [not found]     ` <20190213144536.21661-4-David.Francis-5C7GfCeVMHo@public.gmane.org>
2019-02-13 21:22       ` Manasi Navare via amd-gfx
2019-02-14 13:09   ` [Intel-gfx] [PATCH 0/3] Make DRM DSC helpers more generally usable Jani Nikula via amd-gfx
2019-02-13 15:50 ` ✗ Fi.CI.BAT: failure for " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190213184950.GB11553@intel.com \
    --to=amd-gfx-pd4fty7x32lngt0pjobp9y5qc8qiuhrw@public.gmane.org \
    --cc=David.Francis-5C7GfCeVMHo@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=harry.wentland-5C7GfCeVMHo@public.gmane.org \
    --cc=intel-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=manasi.d.navare-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=nikola.cornij-5C7GfCeVMHo@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.