All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yangtao Li <tiny.windzz@gmail.com>
To: maxime.ripard@bootlin.com, wens@csie.org, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: Yangtao Li <tiny.windzz@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] arm64: dts: allwinner: h6: Enable CPU DVFS(cpufreq)
Date: Fri, 15 Feb 2019 10:53:34 -0500	[thread overview]
Message-ID: <20190215155338.10564-1-tiny.windzz@gmail.com> (raw)

Add the cpufreq information of h6 to dts, source of information is as follows.

h6 cpu opp info:
https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/arch/arm64/boot/dts/sunxi/sun50iw6p1.dtsi

axp805 spec:
http://linux-sunxi.org/images/b/bc/AXP805_Datasheet_V1.0_en.pdf

Yangtao Li (4):
  arm64: dts: allwinner: h6: orangepi: Add CPU supply regulator
  arm64: dts: allwinner: h6: pine: Add CPU supply regulator
  arm64: dts: allwinner: h6: Add clock to CPU cores
  arm64: dts: allwinner: h6: Add CPU Operating Performance Points table

---
v3:
-only update changelog between version 
v2:
-remove the opp of 1.8GHz
-update changelog

I tested the opp table on two H6 boards(with the same axp805 pmu),
but not the pine board or orangepi board.
---

 .../dts/allwinner/sun50i-h6-orangepi.dtsi     |  8 ++-
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  8 ++-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 63 +++++++++++++++++++
 3 files changed, 75 insertions(+), 4 deletions(-)

-- 
2.17.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Yangtao Li <tiny.windzz@gmail.com>
To: maxime.ripard@bootlin.com, wens@csie.org, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH v3 0/4] arm64: dts: allwinner: h6: Enable CPU DVFS(cpufreq)
Date: Fri, 15 Feb 2019 10:53:34 -0500	[thread overview]
Message-ID: <20190215155338.10564-1-tiny.windzz@gmail.com> (raw)

Add the cpufreq information of h6 to dts, source of information is as follows.

h6 cpu opp info:
https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/arch/arm64/boot/dts/sunxi/sun50iw6p1.dtsi

axp805 spec:
http://linux-sunxi.org/images/b/bc/AXP805_Datasheet_V1.0_en.pdf

Yangtao Li (4):
  arm64: dts: allwinner: h6: orangepi: Add CPU supply regulator
  arm64: dts: allwinner: h6: pine: Add CPU supply regulator
  arm64: dts: allwinner: h6: Add clock to CPU cores
  arm64: dts: allwinner: h6: Add CPU Operating Performance Points table

---
v3:
-only update changelog between version 
v2:
-remove the opp of 1.8GHz
-update changelog

I tested the opp table on two H6 boards(with the same axp805 pmu),
but not the pine board or orangepi board.
---

 .../dts/allwinner/sun50i-h6-orangepi.dtsi     |  8 ++-
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  8 ++-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 63 +++++++++++++++++++
 3 files changed, 75 insertions(+), 4 deletions(-)

-- 
2.17.0

             reply	other threads:[~2019-02-15 15:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-15 15:53 Yangtao Li [this message]
2019-02-15 15:53 ` [PATCH v3 0/4] arm64: dts: allwinner: h6: Enable CPU DVFS(cpufreq) Yangtao Li
2019-02-15 15:53 ` [PATCH v3 1/4] arm64: dts: allwinner: h6: orangepi: Add CPU supply regulator Yangtao Li
2019-02-15 15:53   ` Yangtao Li
2019-02-15 15:53 ` [PATCH v3 2/4] arm64: dts: allwinner: h6: pine: " Yangtao Li
2019-02-15 15:53   ` Yangtao Li
2019-02-15 15:53 ` [PATCH v3 3/4] arm64: dts: allwinner: h6: Add clock to CPU cores Yangtao Li
2019-02-15 15:53   ` Yangtao Li
2019-02-15 15:53 ` [PATCH v3 4/4] arm64: dts: allwinner: h6: Add CPU Operating Performance Points table Yangtao Li
2019-02-15 15:53   ` Yangtao Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190215155338.10564-1-tiny.windzz@gmail.com \
    --to=tiny.windzz@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.