[1/1] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings

From: Rob Herring <robh@kernel.org>
To: shun-chih.yu@mediatek.com
Cc: Sean Wang <sean.wang@mediatek.com>, Vinod Koul <vkoul@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Dan Williams <dan.j.williams@intel.com>,
	dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, srv_wsdupstream@mediatek.com
Subject: [1/1] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
Date: Mon, 18 Feb 2019 08:47:19 -0600	[thread overview]
Message-ID: <20190218144719.GA28079@bogus> (raw)

On Thu, Feb 14, 2019 at 03:40:58PM +0800, shun-chih.yu@mediatek.com wrote:
> From: Shun-Chih Yu <shun-chih.yu@mediatek.com>
> 
> Document the devicetree bindings for MediaTek Command-Queue DMA controller
> which could be found on MT6765 SoC or other similar Mediatek SoCs.
> 
> Change-Id: I9736c8cac9be160358feeab935fabaffc5730519

Drop this.

> Signed-off-by: Shun-Chih Yu <shun-chih.yu@mediatek.com>
> ---
>  .../devicetree/bindings/dma/mtk-cqdma.txt          |   31 ++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.txt b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> new file mode 100644
> index 0000000..fb12927
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> @@ -0,0 +1,31 @@
> +MediaTek Command-Queue DMA Controller
> +==================================
> +
> +Required properties:
> +
> +- compatible:	Must be "mediatek,mt6765-cqdma" for MT6765.
> +- reg:		Should contain the base address and length for each channel.
> +- interrupts:	Should contain references to the interrupts for each channel.
> +- clocks:	Should be the clock specifiers corresponding to the entry in
> +		clock-names property.
> +- clock-names:	Should contain "cqdma" entries.
> +- dma-channels: The number of DMA channels supported by the controller.

What's the range of valid values?

> +- dma-requests: The number of DMA request supported by the controller.

What's the range of valid values?

> +- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
> +		in dmas property of a client device represents the channel
> +		number.
> +Example:
> +
> +        cqdma: dma-controller@10212000 {
> +		compatible = "mediatek,mt6765-cqdma";
> +		reg = <0 0x10212000 0 0x1000>;

Should be 2 entries here since there are 2 channels? Or the description 
above is wrong.

> +		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
> +			<GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&infracfg CLK_IFR_CQ_DMA>;
> +		clock-names = "cqdma";
> +		dma-channels = <2>;
> +		dma-requests = <32>;
> +		#dma-cells = <1>;
> +	};
> +
> +DMA clients must use the format described in dma/dma.txt file.
> -- 
> 1.7.9.5
>