* [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10
@ 2019-02-11 11:07 Uwe Kleine-König
2019-02-11 11:07 ` [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 Uwe Kleine-König
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Uwe Kleine-König @ 2019-02-11 11:07 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Gavin Schenk, NXP Linux Team,
Pengutronix Kernel Team, linux-arm-kernel
Add devicetree binding for Eckelmann's ci4x10 board which is powered by
an i.MX6DL SoC.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
This is new in v3.
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7e2cd6ad26bd..ae32a2e9e232 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -90,6 +90,7 @@ properties:
- description: i.MX6DL based Boards
items:
- enum:
+ - eckelmann,imx6dl-ci4x10
- fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- technologic,imx6dl-ts4900
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 2019-02-11 11:07 [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Uwe Kleine-König @ 2019-02-11 11:07 ` Uwe Kleine-König 2019-02-11 21:45 ` Fabio Estevam 2019-02-28 2:42 ` Shawn Guo 2019-02-11 11:07 ` [PATCH v3 3/3] ARM: imx_v6_v7_defconfig: Enable SIOX bus Uwe Kleine-König 2019-02-28 2:38 ` [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Shawn Guo 2 siblings, 2 replies; 6+ messages in thread From: Uwe Kleine-König @ 2019-02-11 11:07 UTC (permalink / raw) To: Shawn Guo Cc: Fabio Estevam, Gavin Schenk, NXP Linux Team, Pengutronix Kernel Team, linux-arm-kernel This is one of two boards that make use of the recently introduced SIOX bus. Apart from the devices described in the dts it features a display with touch that I didn't include here because it needs some non-mainline change to operate correctly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- Changes since v2: - don't use 0x80000000 in pinmux setting (Fabio) - fix polarity of pcie reset (Fabio) - use GPIO_ACTIVE_* for gpio handles (Fabio) - drop unused label arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 381 ++++++++++++++++++ 2 files changed, 382 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index bd40148a15b2..b60d759e39c0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -397,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ + imx6dl-eckelmann-ci4x10.dtb \ imx6dl-emcon-avari.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts new file mode 100644 index 000000000000..a99f581b425f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 Eckelmann AG. + * Copyright (C) 2013 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "imx6dl.dtsi" + +/ { + model = "Eckelmann CI 4X10 Board"; + compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; + + chosen { + stdout-path = &uart3; + }; + + memory { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + rmii_clk: clock-rmii { + /* This clock is provided by the phy (KSZ8091RNB) */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "everspin,mr25h256"; + reg = <0>; + spi-max-frequency = <15000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&gpio2 { + gpio-line-names = "buzzer", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "in2", + "prio2", "prio1", "aux", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio6 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "in1", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + temperature-sensor@49 { + compatible = "ad,ad7414"; + reg = <0x49>; + }; + + rtc@51 { + compatible = "nxp,pcf2127"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ + + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + /* without SION i2c doesn't detect bus busy */ + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 + >; + }; + + pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 + >; + }; + + pinctrl_siox: sioxgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ + >; + }; + + pinctrl_uart1_dte: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart2_dte: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart3_dce: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 + >; + }; + + pinctrl_uart4_dce: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 + >; + }; + + pinctrl_uart5_dce: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dce>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_dce>; + rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_dce>; + status = "okay"; + rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 2019-02-11 11:07 ` [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 Uwe Kleine-König @ 2019-02-11 21:45 ` Fabio Estevam 2019-02-28 2:42 ` Shawn Guo 1 sibling, 0 replies; 6+ messages in thread From: Fabio Estevam @ 2019-02-11 21:45 UTC (permalink / raw) To: Uwe Kleine-König Cc: Gavin Schenk, NXP Linux Team, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Feb 11, 2019 at 9:08 AM Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote: > > This is one of two boards that make use of the recently introduced SIOX > bus. Apart from the devices described in the dts it features a display > with touch that I didn't include here because it needs some non-mainline > change to operate correctly. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 2019-02-11 11:07 ` [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 Uwe Kleine-König 2019-02-11 21:45 ` Fabio Estevam @ 2019-02-28 2:42 ` Shawn Guo 1 sibling, 0 replies; 6+ messages in thread From: Shawn Guo @ 2019-02-28 2:42 UTC (permalink / raw) To: Uwe Kleine-König Cc: Fabio Estevam, Gavin Schenk, NXP Linux Team, Pengutronix Kernel Team, linux-arm-kernel On Mon, Feb 11, 2019 at 12:07:43PM +0100, Uwe Kleine-König wrote: > This is one of two boards that make use of the recently introduced SIOX > bus. Apart from the devices described in the dts it features a display > with touch that I didn't include here because it needs some non-mainline > change to operate correctly. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > --- > Changes since v2: > - don't use 0x80000000 in pinmux setting (Fabio) > - fix polarity of pcie reset (Fabio) > - use GPIO_ACTIVE_* for gpio handles (Fabio) > - drop unused label > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 381 ++++++++++++++++++ > 2 files changed, 382 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index bd40148a15b2..b60d759e39c0 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -397,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-cubox-i-emmc-som-v15.dtb \ > imx6dl-cubox-i-som-v15.dtb \ > imx6dl-dfi-fs700-m60.dtb \ > + imx6dl-eckelmann-ci4x10.dtb \ > imx6dl-emcon-avari.dtb \ > imx6dl-gw51xx.dtb \ > imx6dl-gw52xx.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts > new file mode 100644 > index 000000000000..a99f581b425f > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts > @@ -0,0 +1,381 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2016 Eckelmann AG. > + * Copyright (C) 2013 Freescale Semiconductor, Inc. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > + > +#include "imx6dl.dtsi" > + > +/ { > + model = "Eckelmann CI 4X10 Board"; > + compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; > + > + chosen { > + stdout-path = &uart3; > + }; > + > + memory { memory@10000000 > + device_type = "memory"; > + reg = <0x10000000 0x40000000>; > + }; > + > + rmii_clk: clock-rmii { > + /* This clock is provided by the phy (KSZ8091RNB) */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <50000000>; > + }; > + > + reg_usb_h1_vbus: regulator-usb-h1-vbus { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; > + compatible = "regulator-fixed"; > + regulator-name = "usb_h1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + siox { > + compatible = "eckelmann,siox-gpio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_siox>; > + din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; > + dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; > + dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; > + dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + status = "okay"; > +}; > + > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + status = "okay"; > +}; > + > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + flash@0 { > + compatible = "everspin,mr25h256"; > + reg = <0>; > + spi-max-frequency = <15000000>; > + }; > +}; > + > +&ecspi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi1>; > + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + tpm@0 { > + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; > + reg = <0>; > + spi-max-frequency = <10000000>; > + }; > +}; > + > +&gpio2 { > + gpio-line-names = "buzzer", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio4 { > + gpio-line-names = "", "", "", "", "", "", "", "in2", > + "prio2", "prio1", "aux", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio6 { > + gpio-line-names = "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "in1", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + temperature-sensor@49 { > + compatible = "ad,ad7414"; > + reg = <0x49>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf2127"; > + reg = <0x51>; > + }; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_hog: hog { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ > + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ > + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ > + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ > + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ > + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ > + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ > + > + >; > + }; > + > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 > + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 > + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 > + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 > + >; > + }; > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 > + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 > + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 > + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 > + >; > + }; > + > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + /* without SION i2c doesn't detect bus busy */ > + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 > + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 > + >; > + }; > + > + pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 > + >; > + }; > + > + pinctrl_siox: sioxgrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ > + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ > + >; > + }; > + > + pinctrl_uart1_dte: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 > + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 > + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 > + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 > + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ > + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ > + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ > + >; > + }; > + > + pinctrl_uart2_dte: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 > + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 > + MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 > + MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ > + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ > + >; > + }; > + > + pinctrl_uart3_dce: uart3grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 > + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 > + >; > + }; > + > + pinctrl_uart4_dce: uart4grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 > + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 > + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 > + >; > + }; > + > + pinctrl_uart5_dce: uart5grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 > + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 > + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ > + >; > + }; > + > + pinctrl_usbh1: usbh1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 > + >; > + }; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rmii"; > + phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; > + phy-handle = <&phy>; > + clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + phy: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + }; > + }; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_dte>; > + uart-has-rtscts; > + fsl,dte-mode; > + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; > + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; > + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2_dte>; > + uart-has-rtscts; > + fsl,dte-mode; > + dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; > + dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; > + dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3_dce>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4_dce>; > + rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5_dce>; > + status = "okay"; > + rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; > +}; > + > +&usbh1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbh1>; > + vbus-supply = <®_usb_h1_vbus>; > + status = "okay"; > +}; > + > +&usbotg { > + status = "okay"; > + dr_mode = "peripheral"; Please have 'status' at end of properties. Shawn > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > -- > 2.20.1 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 3/3] ARM: imx_v6_v7_defconfig: Enable SIOX bus 2019-02-11 11:07 [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Uwe Kleine-König 2019-02-11 11:07 ` [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 Uwe Kleine-König @ 2019-02-11 11:07 ` Uwe Kleine-König 2019-02-28 2:38 ` [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Shawn Guo 2 siblings, 0 replies; 6+ messages in thread From: Uwe Kleine-König @ 2019-02-11 11:07 UTC (permalink / raw) To: Shawn Guo Cc: Fabio Estevam, Gavin Schenk, NXP Linux Team, Pengutronix Kernel Team, linux-arm-kernel Now that there is a board making use of this bus is available enable the siox code to increase compile coverage. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- This patch was part of v1 and applied by Shawn. It was dropped later because the commit log was wrong due to not picking the ci4x10 dts. So it's part of v3 again. arch/arm/configs/imx_v6_v7_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5586a5074a96..05680adc355e 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -211,6 +211,7 @@ CONFIG_SPI_GPIO=y CONFIG_SPI_IMX=y CONFIG_SPI_FSL_DSPI=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_SIOX=m CONFIG_GPIO_MAX732X=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y @@ -404,6 +405,8 @@ CONFIG_NVMEM_VF610_OCOTP=y CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_MUX_MMIO=y +CONFIG_SIOX=m +CONFIG_SIOX_BUS_GPIO=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 2019-02-11 11:07 [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Uwe Kleine-König 2019-02-11 11:07 ` [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 Uwe Kleine-König 2019-02-11 11:07 ` [PATCH v3 3/3] ARM: imx_v6_v7_defconfig: Enable SIOX bus Uwe Kleine-König @ 2019-02-28 2:38 ` Shawn Guo 2 siblings, 0 replies; 6+ messages in thread From: Shawn Guo @ 2019-02-28 2:38 UTC (permalink / raw) To: Uwe Kleine-König Cc: Fabio Estevam, Gavin Schenk, NXP Linux Team, Pengutronix Kernel Team, linux-arm-kernel On Mon, Feb 11, 2019 at 12:07:42PM +0100, Uwe Kleine-König wrote: > Add devicetree binding for Eckelmann's ci4x10 board which is powered by > an i.MX6DL SoC. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> This one needs to be Acked by DT maintainer (Rob). Shawn _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-02-28 2:43 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-02-11 11:07 [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Uwe Kleine-König 2019-02-11 11:07 ` [PATCH v3 2/3] ARM: dts: Add devicetree for Eckelmann CI4x10 Uwe Kleine-König 2019-02-11 21:45 ` Fabio Estevam 2019-02-28 2:42 ` Shawn Guo 2019-02-11 11:07 ` [PATCH v3 3/3] ARM: imx_v6_v7_defconfig: Enable SIOX bus Uwe Kleine-König 2019-02-28 2:38 ` [PATCH v3 1/3] dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 Shawn Guo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.