From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com
Subject: Re: [linux-sunxi] [PATCH v2 00/10] Allwinner sunxi message box support
Date: Fri, 1 Mar 2019 06:53:24 +0100 [thread overview]
Message-ID: <20190301055324.GA563@Red> (raw)
In-Reply-To: <20190301052947.32032-1-samuel@sholland.org>
On Thu, Feb 28, 2019 at 11:29:37PM -0600, Samuel Holland wrote:
> This series adds support for the "hardware message box" in sun8i, sun9i,
> and sun50i SoCs, used for communication with the ARISC management
> processor (the platform's equivalent of the ARM SCP). The end goal is to
> use the arm_scpi driver as a client, communicating with firmware running
> on the ARISC CPU, or to use the mailbox to forward NMIs that the
> firmware picks up from R_INTC.
>
> Changes from v1:
> - Marked message box clocks as critical instead of hacks in the driver
> - 8 unidirectional channels instead of 4 bidirectional pairs
> - Use per-SoC compatible strings and an A31 fallback compatible
> - Dropped the mailbox framework patch
> - Include DT patches for SoCs that document the message box
>
> Samuel Holland (10):
> clk: sunxi-ng: sun8i: Mark the msgbox clock as critical
> clk: sunxi-ng: sun9i: Mark the msgbox clock as critical
> clk: sunxi-ng: sun50i: Mark the msgbox clock as critical
> dt-bindings: mailbox: Add a sunxi message box binding
> mailbox: sunxi-msgbox: Add a new mailbox driver
> ARM: dts: sunxi: a80: Add msgbox node
> ARM: dts: sunxi: a83t: Add msgbox node
> ARM: dts: sunxi: h3/h5: Add msgbox node
> arm64: dts: allwinner: a64: Add msgbox node
> arm64: dts: allwinner: h6: Add msgbox node
>
> .../bindings/mailbox/sunxi-msgbox.txt | 44 +++
> arch/arm/boot/dts/sun8i-a83t.dtsi | 10 +
> arch/arm/boot/dts/sun9i-a80.dtsi | 10 +
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 +
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 +
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 +
> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 2 +-
> drivers/mailbox/Kconfig | 11 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/sunxi-msgbox.c | 315 ++++++++++++++++++
> 16 files changed, 429 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt
> create mode 100644 drivers/mailbox/sunxi-msgbox.c
Hello
Appart from applying/compiling/booting, does it exists some way to test it ? check it works ?
Regards
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
Maxime Ripard <maxime.ripard@bootlin.com>,
Michael Turquette <mturquette@baylibre.com>,
Jassi Brar <jassisinghbrar@gmail.com>,
linux-kernel@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [linux-sunxi] [PATCH v2 00/10] Allwinner sunxi message box support
Date: Fri, 1 Mar 2019 06:53:24 +0100 [thread overview]
Message-ID: <20190301055324.GA563@Red> (raw)
In-Reply-To: <20190301052947.32032-1-samuel@sholland.org>
On Thu, Feb 28, 2019 at 11:29:37PM -0600, Samuel Holland wrote:
> This series adds support for the "hardware message box" in sun8i, sun9i,
> and sun50i SoCs, used for communication with the ARISC management
> processor (the platform's equivalent of the ARM SCP). The end goal is to
> use the arm_scpi driver as a client, communicating with firmware running
> on the ARISC CPU, or to use the mailbox to forward NMIs that the
> firmware picks up from R_INTC.
>
> Changes from v1:
> - Marked message box clocks as critical instead of hacks in the driver
> - 8 unidirectional channels instead of 4 bidirectional pairs
> - Use per-SoC compatible strings and an A31 fallback compatible
> - Dropped the mailbox framework patch
> - Include DT patches for SoCs that document the message box
>
> Samuel Holland (10):
> clk: sunxi-ng: sun8i: Mark the msgbox clock as critical
> clk: sunxi-ng: sun9i: Mark the msgbox clock as critical
> clk: sunxi-ng: sun50i: Mark the msgbox clock as critical
> dt-bindings: mailbox: Add a sunxi message box binding
> mailbox: sunxi-msgbox: Add a new mailbox driver
> ARM: dts: sunxi: a80: Add msgbox node
> ARM: dts: sunxi: a83t: Add msgbox node
> ARM: dts: sunxi: h3/h5: Add msgbox node
> arm64: dts: allwinner: a64: Add msgbox node
> arm64: dts: allwinner: h6: Add msgbox node
>
> .../bindings/mailbox/sunxi-msgbox.txt | 44 +++
> arch/arm/boot/dts/sun8i-a83t.dtsi | 10 +
> arch/arm/boot/dts/sun9i-a80.dtsi | 10 +
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 +
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 +
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 +
> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 2 +-
> drivers/mailbox/Kconfig | 11 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/sunxi-msgbox.c | 315 ++++++++++++++++++
> 16 files changed, 429 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt
> create mode 100644 drivers/mailbox/sunxi-msgbox.c
Hello
Appart from applying/compiling/booting, does it exists some way to test it ? check it works ?
Regards
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Samuel Holland <samuel-RkNLwX/CsU9g9hUCZPvPmw@public.gmane.org>
Cc: Jassi Brar
<jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v2 00/10] Allwinner sunxi message box support
Date: Fri, 1 Mar 2019 06:53:24 +0100 [thread overview]
Message-ID: <20190301055324.GA563@Red> (raw)
In-Reply-To: <20190301052947.32032-1-samuel-RkNLwX/CsU9g9hUCZPvPmw@public.gmane.org>
On Thu, Feb 28, 2019 at 11:29:37PM -0600, Samuel Holland wrote:
> This series adds support for the "hardware message box" in sun8i, sun9i,
> and sun50i SoCs, used for communication with the ARISC management
> processor (the platform's equivalent of the ARM SCP). The end goal is to
> use the arm_scpi driver as a client, communicating with firmware running
> on the ARISC CPU, or to use the mailbox to forward NMIs that the
> firmware picks up from R_INTC.
>
> Changes from v1:
> - Marked message box clocks as critical instead of hacks in the driver
> - 8 unidirectional channels instead of 4 bidirectional pairs
> - Use per-SoC compatible strings and an A31 fallback compatible
> - Dropped the mailbox framework patch
> - Include DT patches for SoCs that document the message box
>
> Samuel Holland (10):
> clk: sunxi-ng: sun8i: Mark the msgbox clock as critical
> clk: sunxi-ng: sun9i: Mark the msgbox clock as critical
> clk: sunxi-ng: sun50i: Mark the msgbox clock as critical
> dt-bindings: mailbox: Add a sunxi message box binding
> mailbox: sunxi-msgbox: Add a new mailbox driver
> ARM: dts: sunxi: a80: Add msgbox node
> ARM: dts: sunxi: a83t: Add msgbox node
> ARM: dts: sunxi: h3/h5: Add msgbox node
> arm64: dts: allwinner: a64: Add msgbox node
> arm64: dts: allwinner: h6: Add msgbox node
>
> .../bindings/mailbox/sunxi-msgbox.txt | 44 +++
> arch/arm/boot/dts/sun8i-a83t.dtsi | 10 +
> arch/arm/boot/dts/sun9i-a80.dtsi | 10 +
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 +
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 +
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 +
> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
> drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 2 +-
> drivers/mailbox/Kconfig | 11 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/sunxi-msgbox.c | 315 ++++++++++++++++++
> 16 files changed, 429 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt
> create mode 100644 drivers/mailbox/sunxi-msgbox.c
Hello
Appart from applying/compiling/booting, does it exists some way to test it ? check it works ?
Regards
next prev parent reply other threads:[~2019-03-01 5:53 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-01 5:29 [PATCH v2 00/10] Allwinner sunxi message box support Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 01/10] clk: sunxi-ng: sun8i: Mark the msgbox clock as critical Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 02/10] clk: sunxi-ng: sun9i: " Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 03/10] clk: sunxi-ng: sun50i: " Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 17:31 ` Stephen Boyd
2019-03-01 17:31 ` Stephen Boyd
2019-03-01 17:31 ` Stephen Boyd
2019-03-01 5:29 ` [PATCH v2 04/10] dt-bindings: mailbox: Add a sunxi message box binding Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 05/10] mailbox: sunxi-msgbox: Add a new mailbox driver Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 06/10] ARM: dts: sunxi: a80: Add msgbox node Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 07/10] ARM: dts: sunxi: a83t: " Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 08/10] ARM: dts: sunxi: h3/h5: " Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 09/10] arm64: dts: allwinner: a64: " Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` [PATCH v2 10/10] arm64: dts: allwinner: h6: " Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:29 ` Samuel Holland
2019-03-01 5:53 ` Corentin Labbe [this message]
2019-03-01 5:53 ` [PATCH v2 00/10] Allwinner sunxi message box support Corentin Labbe
2019-03-01 5:53 ` [linux-sunxi] " Corentin Labbe
2019-03-01 14:47 ` Maxime Ripard
2019-03-01 14:47 ` Maxime Ripard
2019-03-01 14:47 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190301055324.GA563@Red \
--to=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.