From: Jonathan Cameron <jic23@kernel.org>
To: Stefan Popa <stefan.popa@analog.com>
Cc: <robh+dt@kernel.org>, <Michael.Hennerich@analog.com>,
<knaack.h@gmx.de>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
<gregkh@linuxfoundation.org>, <linux-kernel@vger.kernel.org>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v3 5/7] iio: imu: adis16480: Deal with filter freq in a generic way
Date: Sun, 3 Mar 2019 12:52:05 +0000 [thread overview]
Message-ID: <20190303125205.6ac90646@archlinux> (raw)
In-Reply-To: <1551284068-4882-6-git-send-email-stefan.popa@analog.com>
On Wed, 27 Feb 2019 18:14:26 +0200
Stefan Popa <stefan.popa@analog.com> wrote:
> When setting the filter frequency, the driver looks into the
> adis16480_def_filter_freqs table for the best match. Pass this table to
> the chip_info struct since future devices will need to use a different
> table.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/adis16480.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
> index 92abc95..c90375d 100644
> --- a/drivers/iio/imu/adis16480.c
> +++ b/drivers/iio/imu/adis16480.c
> @@ -127,6 +127,7 @@ struct adis16480_chip_info {
> unsigned int temp_scale;
> unsigned int int_clk;
> unsigned int max_dec_rate;
> + const unsigned int *filter_freqs;
> };
>
> enum adis16480_int_pin {
> @@ -483,7 +484,7 @@ static int adis16480_get_filter_freq(struct iio_dev *indio_dev,
> if (!(val & enable_mask))
> *freq = 0;
> else
> - *freq = adis16480_def_filter_freqs[(val >> offset) & 0x3];
> + *freq = st->chip_info->filter_freqs[(val >> offset) & 0x3];
>
> return IIO_VAL_INT;
> }
> @@ -510,10 +511,10 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
> val &= ~enable_mask;
> } else {
> best_freq = 0;
> - best_diff = 310;
> + best_diff = st->chip_info->filter_freqs[0];
> for (i = 0; i < ARRAY_SIZE(adis16480_def_filter_freqs); i++) {
> - if (adis16480_def_filter_freqs[i] >= freq) {
> - diff = adis16480_def_filter_freqs[i] - freq;
> + if (st->chip_info->filter_freqs[i] >= freq) {
> + diff = st->chip_info->filter_freqs[i] - freq;
> if (diff < best_diff) {
> best_diff = diff;
> best_freq = i;
> @@ -730,6 +731,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> [ADIS16480] = {
> .channels = adis16480_channels,
> @@ -741,6 +743,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> [ADIS16485] = {
> .channels = adis16485_channels,
> @@ -752,6 +755,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> [ADIS16488] = {
> .channels = adis16480_channels,
> @@ -763,6 +767,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> };
>
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23@kernel.org>
To: Stefan Popa <stefan.popa@analog.com>
Cc: robh+dt@kernel.org, Michael.Hennerich@analog.com,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 5/7] iio: imu: adis16480: Deal with filter freq in a generic way
Date: Sun, 3 Mar 2019 12:52:05 +0000 [thread overview]
Message-ID: <20190303125205.6ac90646@archlinux> (raw)
In-Reply-To: <1551284068-4882-6-git-send-email-stefan.popa@analog.com>
On Wed, 27 Feb 2019 18:14:26 +0200
Stefan Popa <stefan.popa@analog.com> wrote:
> When setting the filter frequency, the driver looks into the
> adis16480_def_filter_freqs table for the best match. Pass this table to
> the chip_info struct since future devices will need to use a different
> table.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/adis16480.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
> index 92abc95..c90375d 100644
> --- a/drivers/iio/imu/adis16480.c
> +++ b/drivers/iio/imu/adis16480.c
> @@ -127,6 +127,7 @@ struct adis16480_chip_info {
> unsigned int temp_scale;
> unsigned int int_clk;
> unsigned int max_dec_rate;
> + const unsigned int *filter_freqs;
> };
>
> enum adis16480_int_pin {
> @@ -483,7 +484,7 @@ static int adis16480_get_filter_freq(struct iio_dev *indio_dev,
> if (!(val & enable_mask))
> *freq = 0;
> else
> - *freq = adis16480_def_filter_freqs[(val >> offset) & 0x3];
> + *freq = st->chip_info->filter_freqs[(val >> offset) & 0x3];
>
> return IIO_VAL_INT;
> }
> @@ -510,10 +511,10 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
> val &= ~enable_mask;
> } else {
> best_freq = 0;
> - best_diff = 310;
> + best_diff = st->chip_info->filter_freqs[0];
> for (i = 0; i < ARRAY_SIZE(adis16480_def_filter_freqs); i++) {
> - if (adis16480_def_filter_freqs[i] >= freq) {
> - diff = adis16480_def_filter_freqs[i] - freq;
> + if (st->chip_info->filter_freqs[i] >= freq) {
> + diff = st->chip_info->filter_freqs[i] - freq;
> if (diff < best_diff) {
> best_diff = diff;
> best_freq = i;
> @@ -730,6 +731,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> [ADIS16480] = {
> .channels = adis16480_channels,
> @@ -741,6 +743,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> [ADIS16485] = {
> .channels = adis16485_channels,
> @@ -752,6 +755,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> [ADIS16488] = {
> .channels = adis16480_channels,
> @@ -763,6 +767,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .temp_scale = 5650, /* 5.65 milli degree Celsius */
> .int_clk = 2460000,
> .max_dec_rate = 2048,
> + .filter_freqs = adis16480_def_filter_freqs,
> },
> };
>
next prev parent reply other threads:[~2019-03-03 12:52 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-27 16:14 [PATCH v3 0/7] iio: imu: adis16480: Add support for ADIS1649x family of devices Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-02-27 16:14 ` [PATCH v3 1/7] iio: imu: adis16480: Add support for configurable drdy indicator Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:46 ` Jonathan Cameron
2019-03-03 12:46 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 2/7] iio: imu: adis16480: Add OF device ID table Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:46 ` Jonathan Cameron
2019-03-03 12:46 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 3/7] iio: imu: adis16480: Treat temperature scale in a generic way Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:47 ` Jonathan Cameron
2019-03-03 12:47 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 4/7] iio: imu: adis16480: Calculate the sampling frequency " Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:51 ` Jonathan Cameron
2019-03-03 12:51 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 5/7] iio: imu: adis16480: Deal with filter freq " Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:52 ` Jonathan Cameron [this message]
2019-03-03 12:52 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 6/7] iio: imu: adis16480: Add support for ADIS1649x family of devices Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:53 ` Jonathan Cameron
2019-03-03 12:53 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 7/7] iio: imu: adis16480: Add docs for ADIS16480 IMU Stefan Popa
2019-02-27 16:14 ` Stefan Popa
2019-03-03 12:54 ` Jonathan Cameron
2019-03-03 12:54 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190303125205.6ac90646@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=stefan.popa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.