From: Rander Wang <rander.wang@linux.intel.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org,
pierre-louis.bossart@linux.intel.com,
Rander Wang <rander.wang@linux.intel.com>
Subject: [PATCH 2/3] ASoC:hdac_hda:use correct format to setup hda codec
Date: Fri, 8 Mar 2019 16:38:58 +0800 [thread overview]
Message-ID: <20190308083859.50026-3-rander.wang@linux.intel.com> (raw)
In-Reply-To: <20190308083859.50026-1-rander.wang@linux.intel.com>
The current implementation of the hdac_hda codec results in zero-valued
samples on capture and noise with headset playback when SOF is used on
platforms with an on-board HDaudio codec. This is root-caused to SOF
using be_hw_params_fixup, and the prepare() call using invalid runtime
fields to determine the format.
This patch moves the format handling to the hw_params() callback, as
done already for hdac_hdmi, to make sure the fixed-up information is
taken into account but keeps the codec initialization in prepare() as
the stream_tag is only available at that time. Moving everything in the
prepare() callback is possible but the code is less elegant so this
two-step solution was chosen.
The solution was tested with the SST driver with no regressions, and all
the issues with SOF playback and capture are solved.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
---
sound/soc/codecs/hdac_hda.c | 53 +++++++++++++++++++++++++++++++++------------
sound/soc/codecs/hdac_hda.h | 1 +
2 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c
index ffecdaaa8cf2..f889d94c8e3c 100644
--- a/sound/soc/codecs/hdac_hda.c
+++ b/sound/soc/codecs/hdac_hda.c
@@ -38,6 +38,9 @@ static void hdac_hda_dai_close(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai);
static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai);
+static int hdac_hda_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai);
static int hdac_hda_dai_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai);
static int hdac_hda_dai_set_tdm_slot(struct snd_soc_dai *dai,
@@ -50,6 +53,7 @@ static const struct snd_soc_dai_ops hdac_hda_dai_ops = {
.startup = hdac_hda_dai_open,
.shutdown = hdac_hda_dai_close,
.prepare = hdac_hda_dai_prepare,
+ .hw_params = hdac_hda_dai_hw_params,
.hw_free = hdac_hda_dai_hw_free,
.set_tdm_slot = hdac_hda_dai_set_tdm_slot,
};
@@ -139,6 +143,39 @@ static int hdac_hda_dai_set_tdm_slot(struct snd_soc_dai *dai,
return 0;
}
+static int hdac_hda_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct hdac_hda_priv *hda_pvt;
+ unsigned int format_val;
+ unsigned int maxbps;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ maxbps = dai->driver->playback.sig_bits;
+ else
+ maxbps = dai->driver->capture.sig_bits;
+
+ hda_pvt = snd_soc_component_get_drvdata(component);
+ format_val = snd_hdac_calc_stream_format(params_rate(params),
+ params_channels(params),
+ params_format(params),
+ maxbps,
+ 0);
+ if (!format_val) {
+ dev_err(dai->dev,
+ "invalid format_val, rate=%d, ch=%d, format=%d, maxbps=%d\n",
+ params_rate(params), params_channels(params),
+ params_format(params), maxbps);
+
+ return -EINVAL;
+ }
+
+ hda_pvt->pcm[dai->id].format_val[substream->stream] = format_val;
+ return 0;
+}
+
static int hdac_hda_dai_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -162,10 +199,9 @@ static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
+ struct hda_pcm_stream *hda_stream;
struct hdac_hda_priv *hda_pvt;
- struct snd_pcm_runtime *runtime = substream->runtime;
struct hdac_device *hdev;
- struct hda_pcm_stream *hda_stream;
unsigned int format_val;
struct hda_pcm *pcm;
unsigned int stream;
@@ -179,19 +215,8 @@ static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
hda_stream = &pcm->stream[substream->stream];
- format_val = snd_hdac_calc_stream_format(runtime->rate,
- runtime->channels,
- runtime->format,
- hda_stream->maxbps,
- 0);
- if (!format_val) {
- dev_err(&hdev->dev,
- "invalid format_val, rate=%d, ch=%d, format=%d\n",
- runtime->rate, runtime->channels, runtime->format);
- return -EINVAL;
- }
-
stream = hda_pvt->pcm[dai->id].stream_tag[substream->stream];
+ format_val = hda_pvt->pcm[dai->id].format_val[substream->stream];
ret = snd_hda_codec_prepare(&hda_pvt->codec, hda_stream,
stream, format_val, substream);
diff --git a/sound/soc/codecs/hdac_hda.h b/sound/soc/codecs/hdac_hda.h
index e444ef593360..6b1bd4f428e7 100644
--- a/sound/soc/codecs/hdac_hda.h
+++ b/sound/soc/codecs/hdac_hda.h
@@ -8,6 +8,7 @@
struct hdac_hda_pcm {
int stream_tag[2];
+ unsigned int format_val[2];
};
struct hdac_hda_priv {
--
2.14.1
next prev parent reply other threads:[~2019-03-08 8:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-08 8:38 [PATCH 0/3] ASoC: hda: capture-related fixes Rander Wang
2019-03-08 8:38 ` [PATCH 1/3] ASoC:soc-pcm:fix a codec fixup issue in TDM case Rander Wang
2019-03-11 17:23 ` Applied "ASoC:soc-pcm:fix a codec fixup issue in TDM case" to the asoc tree Mark Brown
2019-03-08 8:38 ` Rander Wang [this message]
2019-03-08 8:38 ` [PATCH 3/3] ASoC:intel:skl:fix a simultaneous playback & capture issue on hda platform Rander Wang
2019-03-11 17:23 ` Applied "ASoC:intel:skl:fix a simultaneous playback & capture issue on hda platform" to the asoc tree Mark Brown
2019-03-08 15:27 ` [PATCH 0/3] ASoC: hda: capture-related fixes Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190308083859.50026-3-rander.wang@linux.intel.com \
--to=rander.wang@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.