All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] drivers: iio: Kconfig: pedantic cleanup
@ 2019-03-06 14:52 Enrico Weigelt, metux IT consult
  2019-03-10 10:01 ` Jonathan Cameron
  0 siblings, 1 reply; 3+ messages in thread
From: Enrico Weigelt, metux IT consult @ 2019-03-06 14:52 UTC (permalink / raw)
  To: linux-kernel; +Cc: jic23, knaack.h, lars, pmeerw, linux-iio

Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
 drivers/iio/Kconfig                   |  24 +--
 drivers/iio/accel/Kconfig             |  48 +++---
 drivers/iio/adc/Kconfig               |  20 +--
 drivers/iio/chemical/Kconfig          |  12 +-
 drivers/iio/common/ms_sensors/Kconfig |   2 +-
 drivers/iio/humidity/Kconfig          |  20 +--
 drivers/iio/light/Kconfig             | 274 +++++++++++++++++-----------------
 drivers/iio/potentiometer/Kconfig     |  34 ++---
 drivers/iio/temperature/Kconfig       |  16 +-
 9 files changed, 225 insertions(+), 225 deletions(-)

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index d08aeb4..014006d 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -39,28 +39,28 @@ config IIO_TRIGGER
 	  data now' interrupt.
 
 config IIO_CONSUMERS_PER_TRIGGER
-       int "Maximum number of consumers per trigger"
-       depends on IIO_TRIGGER
-       default "2"
-       help
-	This value controls the maximum number of consumers that a
-	given trigger may handle. Default is 2.
+	int "Maximum number of consumers per trigger"
+	depends on IIO_TRIGGER
+	default "2"
+	help
+	  This value controls the maximum number of consumers that a
+	  given trigger may handle. Default is 2.
 
 config IIO_SW_DEVICE
 	tristate "Enable software IIO device support"
 	select IIO_CONFIGFS
 	help
-	 Provides IIO core support for software devices. A software
-	 device can be created via configfs or directly by a driver
-	 using the API provided.
+	  Provides IIO core support for software devices. A software
+	  device can be created via configfs or directly by a driver
+	  using the API provided.
 
 config IIO_SW_TRIGGER
 	tristate "Enable software triggers support"
 	select IIO_CONFIGFS
 	help
-	 Provides IIO core support for software triggers. A software
-	 trigger can be created via configfs or directly by a driver
-	 using the API provided.
+	  Provides IIO core support for software triggers. A software
+	  trigger can be created via configfs or directly by a driver
+	  using the API provided.
 
 config IIO_TRIGGERED_EVENT
 	tristate
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 898839c..4a1f133 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -6,28 +6,28 @@
 menu "Accelerometers"
 
 config ADIS16201
-        tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
-        depends on SPI
-        select IIO_ADIS_LIB
-        select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
-        help
-          Say Y here to build support for Analog Devices adis16201 dual-axis
-          digital inclinometer and accelerometer.
+	tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say Y here to build support for Analog Devices adis16201 dual-axis
+	  digital inclinometer and accelerometer.
 
-          To compile this driver as a module, say M here: the module will
-          be called adis16201.
+	  To compile this driver as a module, say M here: the module will
+	  be called adis16201.
 
 config ADIS16209
-        tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
-        depends on SPI
-        select IIO_ADIS_LIB
-        select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
-        help
-          Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
-          and accelerometer.
+	tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
+	  and accelerometer.
 
-          To compile this driver as a module, say M here: the module will be
-          called adis16209.
+	  To compile this driver as a module, say M here: the module will be
+	  called adis16209.
 
 config ADXL345
 	tristate
@@ -100,16 +100,16 @@ config BMA180
 	  module will be called bma180.
 
 config BMA220
-    tristate "Bosch BMA220 3-Axis Accelerometer Driver"
+	tristate "Bosch BMA220 3-Axis Accelerometer Driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
-    help
-      Say yes here to add support for the Bosch BMA220 triaxial
-      acceleration sensor.
+	help
+	  Say yes here to add support for the Bosch BMA220 triaxial
+	  acceleration sensor.
 
-      To compile this driver as a module, choose M here: the
-      module will be called bma220_spi.
+	  To compile this driver as a module, choose M here: the
+	  module will be called bma220_spi.
 
 config BMC150_ACCEL
 	tristate "Bosch BMC150 Accelerometer Driver"
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7a3ca4e..16b8b7e 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -347,7 +347,7 @@ config HX711
 
 	  This driver uses two GPIOs, one acts as the clock and controls the
 	  channel selection and gain, the other one is used for the measurement
-          data
+	  data
 
 	  Currently the raw value is read from the chip and delivered.
 	  To get an actual weight one needs to subtract the
@@ -533,17 +533,17 @@ config MCP3911
 	  called mcp3911.
 
 config MEDIATEK_MT6577_AUXADC
-        tristate "MediaTek AUXADC driver"
-        depends on ARCH_MEDIATEK || COMPILE_TEST
-        depends on HAS_IOMEM
-        help
-          Say yes here to enable support for MediaTek mt65xx AUXADC.
+	tristate "MediaTek AUXADC driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say yes here to enable support for MediaTek mt65xx AUXADC.
 
-          The driver supports immediate mode operation to read from one of sixteen
-          channels (external or internal).
+	  The driver supports immediate mode operation to read from one of sixteen
+	  channels (external or internal).
 
-          This driver can also be built as a module. If so, the module will be
-          called mt6577_auxadc.
+	  This driver can also be built as a module. If so, the module will be
+	  called mt6577_auxadc.
 
 config MEN_Z188_ADC
 	tristate "MEN 16z188 ADC IP Core support"
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index b8e005b..e6ad533 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -12,14 +12,14 @@ config ATLAS_PH_SENSOR
 	select IIO_TRIGGERED_BUFFER
 	select IRQ_WORK
 	help
-	 Say Y here to build I2C interface support for the following
-	 Atlas Scientific OEM SM sensors:
+	  Say Y here to build I2C interface support for the following
+	  Atlas Scientific OEM SM sensors:
 	    * pH SM sensor
 	    * EC SM sensor
 	    * ORP SM sensor
 
-	 To compile this driver as module, choose M here: the
-	 module will be called atlas-ph-sensor.
+	  To compile this driver as module, choose M here: the
+	  module will be called atlas-ph-sensor.
 
 config BME680
 	tristate "Bosch Sensortec BME680 sensor driver"
@@ -47,8 +47,8 @@ config BME680_SPI
 config CCS811
 	tristate "AMS CCS811 VOC sensor"
 	depends on I2C
-    select IIO_BUFFER
-    select IIO_TRIGGERED_BUFFER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build I2C interface support for the AMS
 	  CCS811 VOC (Volatile Organic Compounds) sensor
diff --git a/drivers/iio/common/ms_sensors/Kconfig b/drivers/iio/common/ms_sensors/Kconfig
index b28a92b..89398d0 100644
--- a/drivers/iio/common/ms_sensors/Kconfig
+++ b/drivers/iio/common/ms_sensors/Kconfig
@@ -3,4 +3,4 @@
 #
 
 config IIO_MS_SENSORS_I2C
-        tristate
+	tristate
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 1a0d458..f1a8ec9 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -4,16 +4,16 @@
 menu "Humidity sensors"
 
 config AM2315
-    tristate "Aosong AM2315 relative humidity and temperature sensor"
-    depends on I2C
-    select IIO_BUFFER
-    select IIO_TRIGGERED_BUFFER
-    help
-      If you say yes here you get support for the Aosong AM2315
-      relative humidity and ambient temperature sensor.
+	tristate "Aosong AM2315 relative humidity and temperature sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for the Aosong AM2315
+	  relative humidity and ambient temperature sensor.
 
-      This driver can also be built as a module. If so, the module will
-      be called am2315.
+	  This driver can also be built as a module. If so, the module will
+	  be called am2315.
 
 config DHT11
 	tristate "DHT11 (and compatible sensors) driver"
@@ -78,7 +78,7 @@ config HTS221_SPI
 config HTU21
 	tristate "Measurement Specialties HTU21 humidity & temperature sensor"
 	depends on I2C
-        select IIO_MS_SENSORS_I2C
+	select IIO_MS_SENSORS_I2C
 	help
 	  If you say yes here you get support for the Measurement Specialties
 	  HTU21 humidity and temperature sensor.
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 36f4584..a378ec7 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -13,11 +13,11 @@ config ACPI_ALS
 	select IIO_TRIGGERED_BUFFER
 	select IIO_KFIFO_BUF
 	help
-	 Say Y here if you want to build a driver for the ACPI0008
-	 Ambient Light Sensor.
+	  Say Y here if you want to build a driver for the ACPI0008
+	  Ambient Light Sensor.
 
-	 To compile this driver as a module, choose M here: the module will
-	 be called acpi-als.
+	  To compile this driver as a module, choose M here: the module will
+	  be called acpi-als.
 
 config ADJD_S311
 	tristate "ADJD-S311-CR999 digital color sensor"
@@ -25,31 +25,31 @@ config ADJD_S311
 	select IIO_TRIGGERED_BUFFER
 	depends on I2C
 	help
-	 If you say yes here you get support for the Avago ADJD-S311-CR999
-	 digital color light sensor.
+	  If you say yes here you get support for the Avago ADJD-S311-CR999
+	  digital color light sensor.
 
-	 This driver can also be built as a module.  If so, the module
-	 will be called adjd_s311.
+	  This driver can also be built as a module.  If so, the module
+	  will be called adjd_s311.
 
 config AL3320A
 	tristate "AL3320A ambient light sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the Dyna Image AL3320A
-	 ambient light sensor.
+	  Say Y here if you want to build a driver for the Dyna Image AL3320A
+	  ambient light sensor.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called al3320a.
+	  To compile this driver as a module, choose M here: the
+	  module will be called al3320a.
 
 config APDS9300
 	tristate "APDS9300 ambient light sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the Avago APDS9300
-	 ambient light sensor.
+	  Say Y here if you want to build a driver for the Avago APDS9300
+	  ambient light sensor.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called apds9300.
+	  To compile this driver as a module, choose M here: the
+	  module will be called apds9300.
 
 config APDS9960
 	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
@@ -68,74 +68,74 @@ config BH1750
 	tristate "ROHM BH1750 ambient light sensor"
 	depends on I2C
 	help
-	 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
-	 BH1750, BH1751 ambient light sensors.
+	  Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
+	  BH1750, BH1751 ambient light sensors.
 
-	 To compile this driver as a module, choose M here: the module will
-	 be called bh1750.
+	  To compile this driver as a module, choose M here: the module will
+	  be called bh1750.
 
 config BH1780
 	tristate "ROHM BH1780 ambient light sensor"
 	depends on I2C
 	help
-	 Say Y here to build support for the ROHM BH1780GLI ambient
-	 light sensor.
+	  Say Y here to build support for the ROHM BH1780GLI ambient
+	  light sensor.
 
-	 To compile this driver as a module, choose M here: the module will
-	 be called bh1780.
+	  To compile this driver as a module, choose M here: the module will
+	  be called bh1780.
 
 config CM32181
 	depends on I2C
 	tristate "CM32181 driver"
 	help
-	 Say Y here if you use cm32181.
-	 This option enables ambient light sensor using
-	 Capella cm32181 device driver.
+	  Say Y here if you use cm32181.
+	  This option enables ambient light sensor using
+	  Capella cm32181 device driver.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called cm32181.
+	  To compile this driver as a module, choose M here:
+	  the module will be called cm32181.
 
 config CM3232
 	depends on I2C
 	tristate "CM3232 ambient light sensor"
 	help
-	 Say Y here if you use cm3232.
-	 This option enables ambient light sensor using
-	 Capella Microsystems cm3232 device driver.
+	  Say Y here if you use cm3232.
+	  This option enables ambient light sensor using
+	  Capella Microsystems cm3232 device driver.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called cm3232.
+	  To compile this driver as a module, choose M here:
+	  the module will be called cm3232.
 
 config CM3323
 	depends on I2C
 	tristate "Capella CM3323 color light sensor"
 	help
-	 Say Y here if you want to build a driver for Capella CM3323
-	 color sensor.
+	  Say Y here if you want to build a driver for Capella CM3323
+	  color sensor.
 
-	 To compile this driver as a module, choose M here: the module will
-	 be called cm3323.
+	  To compile this driver as a module, choose M here: the module will
+	  be called cm3323.
 
 config CM3605
 	tristate "Capella CM3605 ambient light and proximity sensor"
 	depends on OF
 	help
-	 Say Y here if you want to build a driver for Capella CM3605
-	 ambient light and short range proximity sensor.
+	  Say Y here if you want to build a driver for Capella CM3605
+	  ambient light and short range proximity sensor.
 
-	 To compile this driver as a module, choose M here: the module will
-	 be called cm3605.
+	  To compile this driver as a module, choose M here: the module will
+	  be called cm3605.
 
 config CM36651
 	depends on I2C
 	tristate "CM36651 driver"
 	help
-	 Say Y here if you use cm36651.
-	 This option enables proximity & RGB sensor using
-	 Capella cm36651 device driver.
+	  Say Y here if you use cm36651.
+	  This option enables proximity & RGB sensor using
+	  Capella cm36651 device driver.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called cm36651.
+	  To compile this driver as a module, choose M here:
+	  the module will be called cm36651.
 
 config IIO_CROS_EC_LIGHT_PROX
 	tristate "ChromeOS EC Light and Proximity Sensors"
@@ -167,21 +167,21 @@ config SENSORS_ISL29018
 	select REGMAP_I2C
 	default n
 	help
-	 If you say yes here you get support for ambient light sensing and
-	 proximity infrared sensing from Intersil ISL29018.
-	 This driver will provide the measurements of ambient light intensity
-	 in lux, proximity infrared sensing and normal infrared sensing.
-	 Data from sensor is accessible via sysfs.
+	  If you say yes here you get support for ambient light sensing and
+	  proximity infrared sensing from Intersil ISL29018.
+	  This driver will provide the measurements of ambient light intensity
+	  in lux, proximity infrared sensing and normal infrared sensing.
+	  Data from sensor is accessible via sysfs.
 
 config SENSORS_ISL29028
 	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	 Provides driver for the Intersil's ISL29028 device.
-	 This driver supports the sysfs interface to get the ALS, IR intensity,
-	 Proximity value via iio. The ISL29028 provides the concurrent sensing
-	 of ambient light and proximity.
+	  Provides driver for the Intersil's ISL29028 device.
+	  This driver supports the sysfs interface to get the ALS, IR intensity,
+	  Proximity value via iio. The ISL29028 provides the concurrent sensing
+	  of ambient light and proximity.
 
 config ISL29125
 	tristate "Intersil ISL29125 digital color light sensor"
@@ -228,22 +228,22 @@ config JSA1212
 	depends on I2C
 	select REGMAP_I2C
 	help
-	 Say Y here if you want to build a IIO driver for JSA1212
-	 proximity & ALS sensor device.
+	  Say Y here if you want to build a IIO driver for JSA1212
+	  proximity & ALS sensor device.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called jsa1212.
+	  To compile this driver as a module, choose M here:
+	  the module will be called jsa1212.
 
 config RPR0521
 	tristate "ROHM RPR0521 ALS and proximity sensor driver"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	 Say Y here if you want to build support for ROHM's RPR0521
-	 ambient light and proximity sensor device.
+	  Say Y here if you want to build support for ROHM's RPR0521
+	  ambient light and proximity sensor device.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called rpr0521.
+	  To compile this driver as a module, choose M here:
+	  the module will be called rpr0521.
 
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
@@ -269,22 +269,22 @@ config LTR501
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	 If you say yes here you get support for the Lite-On LTR-501ALS-01
-	 ambient light and proximity sensor. This driver also supports LTR-559
-	 ALS/PS or LTR-301 ALS sensors.
+	  If you say yes here you get support for the Lite-On LTR-501ALS-01
+	  ambient light and proximity sensor. This driver also supports LTR-559
+	  ALS/PS or LTR-301 ALS sensors.
 
-	 This driver can also be built as a module.  If so, the module
-         will be called ltr501.
+	  This driver can also be built as a module.  If so, the module
+	  will be called ltr501.
 
 config LV0104CS
 	tristate "LV0104CS Ambient Light Sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build support for the On Semiconductor
-	 LV0104CS ambient light sensor.
+	  Say Y here if you want to build support for the On Semiconductor
+	  LV0104CS ambient light sensor.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called lv0104cs.
+	  To compile this driver as a module, choose M here:
+	  the module will be called lv0104cs.
 
 config MAX44000
 	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
@@ -293,11 +293,11 @@ config MAX44000
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	 Say Y here if you want to build support for Maxim Integrated's
-	 MAX44000 ambient and infrared proximity sensor device.
+	  Say Y here if you want to build support for Maxim Integrated's
+	  MAX44000 ambient and infrared proximity sensor device.
 
-	 To compile this driver as a module, choose M here:
-	 the module will be called max44000.
+	  To compile this driver as a module, choose M here:
+	  the module will be called max44000.
 
 config OPT3001
 	tristate "Texas Instruments OPT3001 Light Sensor"
@@ -310,15 +310,15 @@ config OPT3001
 	  opt3001.
 
 config PA12203001
-        tristate "TXC PA12203001 light and proximity sensor"
-        depends on I2C
-        select REGMAP_I2C
-        help
-         If you say yes here you get support for the TXC PA12203001
-         ambient light and proximity sensor.
+	tristate "TXC PA12203001 light and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TXC PA12203001
+	  ambient light and proximity sensor.
 
-         This driver can also be built as a module.  If so, the module
-         will be called pa12203001.
+	  This driver can also be built as a module.  If so, the module
+	  will be called pa12203001.
 
 config SI1133
 	tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
@@ -349,12 +349,12 @@ config STK3310
 	depends on I2C
 	select REGMAP_I2C
 	help
-	 Say yes here to get support for the Sensortek STK3310 ambient light
-	 and proximity sensor. The STK3311 model is also supported by this
-	 driver.
+	  Say yes here to get support for the Sensortek STK3310 ambient light
+	  and proximity sensor. The STK3311 model is also supported by this
+	  driver.
 
-	 Choosing M will build the driver as a module. If so, the module
-	 will be called stk3310.
+	  Choosing M will build the driver as a module. If so, the module
+	  will be called stk3310.
 
 config ST_UVIS25
 	tristate "STMicroelectronics UVIS25 sensor driver"
@@ -386,11 +386,11 @@ config TCS3414
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	 If you say yes here you get support for the TAOS TCS3414
-	 family of digital color sensors.
+	  If you say yes here you get support for the TAOS TCS3414
+	  family of digital color sensors.
 
-	 This driver can also be built as a module.  If so, the module
-	 will be called tcs3414.
+	  This driver can also be built as a module.  If so, the module
+	  will be called tcs3414.
 
 config TCS3472
 	tristate "TAOS TCS3472 color light-to-digital converter"
@@ -398,67 +398,67 @@ config TCS3472
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	 If you say yes here you get support for the TAOS TCS3472
-	 family of color light-to-digital converters with IR filter.
+	  If you say yes here you get support for the TAOS TCS3472
+	  family of color light-to-digital converters with IR filter.
 
-	 This driver can also be built as a module.  If so, the module
-	 will be called tcs3472.
+	  This driver can also be built as a module.  If so, the module
+	  will be called tcs3472.
 
 config SENSORS_TSL2563
 	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
 	depends on I2C
 	help
-	 If you say yes here you get support for the Taos TSL2560,
-	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
+	  If you say yes here you get support for the Taos TSL2560,
+	  TSL2561, TSL2562 and TSL2563 ambient light sensors.
 
-	 This driver can also be built as a module.  If so, the module
-	 will be called tsl2563.
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2563.
 
 config TSL2583
 	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
 	depends on I2C
 	help
-	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
-	 Access ALS data via iio, sysfs.
+	  Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
+	  Access ALS data via iio, sysfs.
 
 config TSL2772
 	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
 	depends on I2C
 	help
-	 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
-	 tmd2672, tsl2772, tmd2772 devices.
-	 Provides iio_events and direct access via sysfs.
+	  Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
+	  tmd2672, tsl2772, tmd2772 devices.
+	  Provides iio_events and direct access via sysfs.
 
 config TSL4531
 	tristate "TAOS TSL4531 ambient light sensors"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the TAOS TSL4531 family
-	 of ambient light sensors with direct lux output.
+	  Say Y here if you want to build a driver for the TAOS TSL4531 family
+	  of ambient light sensors with direct lux output.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called tsl4531.
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsl4531.
 
 config US5182D
 	tristate "UPISEMI light and proximity sensor"
 	depends on I2C
 	help
-	 If you say yes here you get support for the UPISEMI US5182D
-	 ambient light and proximity sensor.
+	  If you say yes here you get support for the UPISEMI US5182D
+	  ambient light and proximity sensor.
 
-	 This driver can also be built as a module.  If so, the module
-	 will be called us5182d.
+	  This driver can also be built as a module.  If so, the module
+	  will be called us5182d.
 
 config VCNL4000
 	tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the Vishay VCNL4000,
-	 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
-	 sensor.
+	  Say Y here if you want to build a driver for the Vishay VCNL4000,
+	  VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
+	  sensor.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called vcnl4000.
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl4000.
 
 config VCNL4035
 	tristate "VCNL4035 combined ALS and proximity sensor"
@@ -466,41 +466,41 @@ config VCNL4035
 	select REGMAP_I2C
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the Vishay VCNL4035,
-	 combined ambient light (ALS) and proximity sensor. Currently only ALS
-	 function is available.
+	  Say Y here if you want to build a driver for the Vishay VCNL4035,
+	  combined ambient light (ALS) and proximity sensor. Currently only ALS
+	  function is available.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called vcnl4035.
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl4035.
 
 config VEML6070
 	tristate "VEML6070 UV A light sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
-	 light sensor.
+	  Say Y here if you want to build a driver for the Vishay VEML6070 UV A
+	  light sensor.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called veml6070.
+	  To compile this driver as a module, choose M here: the
+	  module will be called veml6070.
 
 config VL6180
 	tristate "VL6180 ALS, range and proximity sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the STMicroelectronics
-	 VL6180 combined ambient light, range and proximity sensor.
+	  Say Y here if you want to build a driver for the STMicroelectronics
+	  VL6180 combined ambient light, range and proximity sensor.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called vl6180.
+	  To compile this driver as a module, choose M here: the
+	  module will be called vl6180.
 
 config ZOPT2201
 	tristate "ZOPT2201 ALS and UV B sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the IDT
-	 ZOPT2201 ambient light and UV B sensor.
+	  Say Y here if you want to build a driver for the IDT
+	  ZOPT2201 ambient light and UV B sensor.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called zopt2201.
+	  To compile this driver as a module, choose M here: the
+	  module will be called zopt2201.
 
 endmenu
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 6303cbe..a81a3a1 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,26 +26,26 @@ config DS1803
 	  module will be called ds1803.
 
 config MAX5481
-        tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
-        depends on SPI
-        help
-          Say yes here to build support for the Maxim
-          MAX5481, MAX5482, MAX5483, MAX5484 digital potentiometer
-          chips.
+	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5481, MAX5482, MAX5483, MAX5484 digital potentiometer
+	  chips.
 
-          To compile this driver as a module, choose M here: the
-          module will be called max5481.
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5481.
 
 config MAX5487
-        tristate "Maxim MAX5487/MAX5488/MAX5489 Digital Potentiometer driver"
-        depends on SPI
-        help
-          Say yes here to build support for the Maxim
-          MAX5487, MAX5488, MAX5489 digital potentiometer
-          chips.
-
-          To compile this driver as a module, choose M here: the
-          module will be called max5487.
+	tristate "Maxim MAX5487/MAX5488/MAX5489 Digital Potentiometer driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5487, MAX5488, MAX5489 digital potentiometer
+	  chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5487.
 
 config MCP4018
 	tristate "Microchip MCP4017/18/19 Digital Potentiometer driver"
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index 82e4a62..7f0b826 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -66,14 +66,14 @@ config TMP006
 	  be called tmp006.
 
 config TMP007
-        tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
-        depends on I2C
-        help
-          If you say yes here you get support for the Texas Instruments
-          TMP007 infrared thermopile sensor with Integrated Math Engine.
-
-          This driver can also be built as a module. If so, the module will
-          be called tmp007.
+	tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  TMP007 infrared thermopile sensor with Integrated Math Engine.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tmp007.
 
 config TSYS01
 	tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-03-11  9:27 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-06 14:52 [PATCH] drivers: iio: Kconfig: pedantic cleanup Enrico Weigelt, metux IT consult
2019-03-10 10:01 ` Jonathan Cameron
2019-03-11  9:26   ` Enrico Weigelt, metux IT consult

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.