All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Patrick Havelange <patrick.havelange@essensium.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	Esben Haabendal <esben@haabendal.dk>, <linux-iio@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-pwm@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>,
	"Jonathan Cameron" <jic23@kernel.org>
Subject: Re: [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation
Date: Mon, 11 Mar 2019 12:36:26 +0000	[thread overview]
Message-ID: <20190311123626.00004f70@huawei.com> (raw)
In-Reply-To: <20190307114216.GB7851@icarus>

On Thu, 7 Mar 2019 20:42:16 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> On Wed, Mar 06, 2019 at 12:12:07PM +0100, Patrick Havelange wrote:
> > This adds documentation for the specific prescaler entry.
> > 
> > Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
> > ---
> > Changes v2
> >  - Add doc for prescaler entry
> > ---
> >  .../ABI/testing/sysfs-bus-counter-ftm-quaddec    | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > new file mode 100644
> > index 000000000000..2da629d6d485
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > @@ -0,0 +1,16 @@
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Discrete set of available values for the respective Count Y
> > +		configuration are listed in this file. Values are delimited by
> > +		newline characters.
> > +
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Configure the prescaler value associated with Count Y.
> > +		On the FlexTimer, the counter clock source passes through a
> > +		prescaler that is a 7-bit counter. This acts like a clock
> > +		divider.
> > -- 
> > 2.19.1  
> 
> Hmm, prescalers seem common enough among counter devices to permit these
> attributes to be listed in the sysfs-bus-counter documentation file.
> However, I'd like to wait until we get another counter driver for a
> device with a prescaler before we make that move. From there, we'll have
> a better vantage point to determine a fitting standard prescaler
> attribute behavior.
> 
> So for now, we'll keep these attributes documented here in the
> sysfs-bus-counter-ftm-quaddec file, until the time comes to broach the
> discussion again.
Agreed. As long as the definition is sufficiently non-specific so it can be
moved later.  I'm not sure for example that the docs need to say that it is
a 7 bit counter. That should be apparent from prescaler_available - or at
least possible values should be which is all we need to know.

Jonathan
> 
> William Breathitt Gray



WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Patrick Havelange <patrick.havelange@essensium.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Thierry Reding <thierry.reding@gmail.com>,
	Esben Haabendal <esben@haabendal.dk>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-pwm@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	Jonathan Cameron <jic23@kernel.org>
Subject: Re: [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation
Date: Mon, 11 Mar 2019 12:36:26 +0000	[thread overview]
Message-ID: <20190311123626.00004f70@huawei.com> (raw)
In-Reply-To: <20190307114216.GB7851@icarus>

On Thu, 7 Mar 2019 20:42:16 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> On Wed, Mar 06, 2019 at 12:12:07PM +0100, Patrick Havelange wrote:
> > This adds documentation for the specific prescaler entry.
> > 
> > Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
> > ---
> > Changes v2
> >  - Add doc for prescaler entry
> > ---
> >  .../ABI/testing/sysfs-bus-counter-ftm-quaddec    | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > new file mode 100644
> > index 000000000000..2da629d6d485
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > @@ -0,0 +1,16 @@
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Discrete set of available values for the respective Count Y
> > +		configuration are listed in this file. Values are delimited by
> > +		newline characters.
> > +
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Configure the prescaler value associated with Count Y.
> > +		On the FlexTimer, the counter clock source passes through a
> > +		prescaler that is a 7-bit counter. This acts like a clock
> > +		divider.
> > -- 
> > 2.19.1  
> 
> Hmm, prescalers seem common enough among counter devices to permit these
> attributes to be listed in the sysfs-bus-counter documentation file.
> However, I'd like to wait until we get another counter driver for a
> device with a prescaler before we make that move. From there, we'll have
> a better vantage point to determine a fitting standard prescaler
> attribute behavior.
> 
> So for now, we'll keep these attributes documented here in the
> sysfs-bus-counter-ftm-quaddec file, until the time comes to broach the
> discussion again.
Agreed. As long as the definition is sufficiently non-specific so it can be
moved later.  I'm not sure for example that the docs need to say that it is
a 7 bit counter. That should be apparent from prescaler_available - or at
least possible values should be which is all we need to know.

Jonathan
> 
> William Breathitt Gray

WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	Jonathan Cameron <jic23@kernel.org>,
	linux-pwm@vger.kernel.org, linux-iio@vger.kernel.org,
	Patrick Havelange <patrick.havelange@essensium.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	Thomas Gleixner <tglx@linutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Esben Haabendal <esben@haabendal.dk>
Subject: Re: [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation
Date: Mon, 11 Mar 2019 12:36:26 +0000	[thread overview]
Message-ID: <20190311123626.00004f70@huawei.com> (raw)
In-Reply-To: <20190307114216.GB7851@icarus>

On Thu, 7 Mar 2019 20:42:16 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> On Wed, Mar 06, 2019 at 12:12:07PM +0100, Patrick Havelange wrote:
> > This adds documentation for the specific prescaler entry.
> > 
> > Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
> > ---
> > Changes v2
> >  - Add doc for prescaler entry
> > ---
> >  .../ABI/testing/sysfs-bus-counter-ftm-quaddec    | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > new file mode 100644
> > index 000000000000..2da629d6d485
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > @@ -0,0 +1,16 @@
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Discrete set of available values for the respective Count Y
> > +		configuration are listed in this file. Values are delimited by
> > +		newline characters.
> > +
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Configure the prescaler value associated with Count Y.
> > +		On the FlexTimer, the counter clock source passes through a
> > +		prescaler that is a 7-bit counter. This acts like a clock
> > +		divider.
> > -- 
> > 2.19.1  
> 
> Hmm, prescalers seem common enough among counter devices to permit these
> attributes to be listed in the sysfs-bus-counter documentation file.
> However, I'd like to wait until we get another counter driver for a
> device with a prescaler before we make that move. From there, we'll have
> a better vantage point to determine a fitting standard prescaler
> attribute behavior.
> 
> So for now, we'll keep these attributes documented here in the
> sysfs-bus-counter-ftm-quaddec file, until the time comes to broach the
> discussion again.
Agreed. As long as the definition is sufficiently non-specific so it can be
moved later.  I'm not sure for example that the docs need to say that it is
a 7 bit counter. That should be apparent from prescaler_available - or at
least possible values should be which is all we need to know.

Jonathan
> 
> William Breathitt Gray



WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	Jonathan Cameron <jic23@kernel.org>,
	linux-pwm@vger.kernel.org, linux-iio@vger.kernel.org,
	Patrick Havelange <patrick.havelange@essensium.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	Thomas Gleixner <tglx@linutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Esben Haabendal <esben@haabendal.dk>
Subject: Re: [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation
Date: Mon, 11 Mar 2019 12:36:26 +0000	[thread overview]
Message-ID: <20190311123626.00004f70@huawei.com> (raw)
In-Reply-To: <20190307114216.GB7851@icarus>

On Thu, 7 Mar 2019 20:42:16 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> On Wed, Mar 06, 2019 at 12:12:07PM +0100, Patrick Havelange wrote:
> > This adds documentation for the specific prescaler entry.
> > 
> > Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
> > ---
> > Changes v2
> >  - Add doc for prescaler entry
> > ---
> >  .../ABI/testing/sysfs-bus-counter-ftm-quaddec    | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > new file mode 100644
> > index 000000000000..2da629d6d485
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> > @@ -0,0 +1,16 @@
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Discrete set of available values for the respective Count Y
> > +		configuration are listed in this file. Values are delimited by
> > +		newline characters.
> > +
> > +What:		/sys/bus/counter/devices/counterX/countY/prescaler
> > +KernelVersion:	5.1
> > +Contact:	linux-iio@vger.kernel.org
> > +Description:
> > +		Configure the prescaler value associated with Count Y.
> > +		On the FlexTimer, the counter clock source passes through a
> > +		prescaler that is a 7-bit counter. This acts like a clock
> > +		divider.
> > -- 
> > 2.19.1  
> 
> Hmm, prescalers seem common enough among counter devices to permit these
> attributes to be listed in the sysfs-bus-counter documentation file.
> However, I'd like to wait until we get another counter driver for a
> device with a prescaler before we make that move. From there, we'll have
> a better vantage point to determine a fitting standard prescaler
> attribute behavior.
> 
> So for now, we'll keep these attributes documented here in the
> sysfs-bus-counter-ftm-quaddec file, until the time comes to broach the
> discussion again.
Agreed. As long as the definition is sufficiently non-specific so it can be
moved later.  I'm not sure for example that the docs need to say that it is
a 7 bit counter. That should be apparent from prescaler_available - or at
least possible values should be which is all we need to know.

Jonathan
> 
> William Breathitt Gray



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-03-11 12:36 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-06 11:12 [PATCH v2 0/7] FlexTimer Module Quadrature decoder counter Patrick Havelange
2019-03-06 11:12 ` Patrick Havelange
2019-03-06 11:12 ` [PATCH v2 1/7] include/fsl: add common FlexTimer #defines in a separate header Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-03-06 11:12 ` [PATCH v2 2/7] drivers/pwm: pwm-fsl-ftm: use common header for FlexTimer #defines Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-03-06 11:12 ` [PATCH v2 3/7] drivers/clocksource: timer-fsl-ftm: " Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-04-11 16:40   ` Daniel Lezcano
2019-04-11 16:40     ` Daniel Lezcano
2019-03-06 11:12 ` [PATCH v2 4/7] dt-bindings: counter: ftm-quaddec Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-03-12 19:09   ` Rob Herring
2019-03-12 19:09     ` Rob Herring
2019-03-12 19:09     ` Rob Herring
2019-03-16 14:21     ` Jonathan Cameron
2019-03-16 14:21       ` Jonathan Cameron
2019-03-16 14:21       ` Jonathan Cameron
2019-03-26 15:43       ` Arnout Vandecappelle
2019-03-26 15:43         ` Arnout Vandecappelle
2019-03-26 15:43         ` Arnout Vandecappelle
2019-03-26 16:06         ` Rob Herring
2019-03-26 16:06           ` Rob Herring
2019-03-26 16:06           ` Rob Herring
2019-03-06 11:12 ` [PATCH v2 5/7] counter: add FlexTimer Module Quadrature decoder counter driver Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-03-07 11:32   ` William Breathitt Gray
2019-03-07 11:32     ` William Breathitt Gray
2019-03-07 11:32     ` William Breathitt Gray
2019-03-11 11:22     ` Patrick Havelange
2019-03-11 11:22       ` Patrick Havelange
2019-03-11 11:22       ` Patrick Havelange
2019-03-11 12:24   ` Jonathan Cameron
2019-03-11 12:24     ` Jonathan Cameron
2019-03-11 12:24     ` Jonathan Cameron
2019-03-11 12:24     ` Jonathan Cameron
2019-03-06 11:12 ` [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-03-07 11:42   ` William Breathitt Gray
2019-03-07 11:42     ` William Breathitt Gray
2019-03-07 11:42     ` William Breathitt Gray
2019-03-11 12:36     ` Jonathan Cameron [this message]
2019-03-11 12:36       ` Jonathan Cameron
2019-03-11 12:36       ` Jonathan Cameron
2019-03-11 12:36       ` Jonathan Cameron
2019-03-06 11:12 ` [PATCH v2 7/7] LS1021A: dtsi: add ftm quad decoder entries Patrick Havelange
2019-03-06 11:12   ` Patrick Havelange
2019-03-07 12:03 ` [PATCH v2 0/7] FlexTimer Module Quadrature decoder counter William Breathitt Gray
2019-03-07 12:03   ` William Breathitt Gray
2019-03-07 12:03   ` William Breathitt Gray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190311123626.00004f70@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=esben@haabendal.dk \
    --cc=jic23@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=patrick.havelange@essensium.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.