From: Guenter Roeck <linux@roeck-us.net>
To: Robin Murphy <robin.murphy@arm.com>
Cc: jdelvare@suse.com, kgene@kernel.org, krzk@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
thierry.reding@gmail.com, jonathanh@nvidia.com, heiko@sntech.de,
linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
Date: Tue, 19 Mar 2019 08:00:14 -0700 [thread overview]
Message-ID: <20190319150014.GA29158@roeck-us.net> (raw)
In-Reply-To: <afde4ebd929821d63b5172c8e70e15f0725a4b49.1553006788.git.robin.murphy@arm.com>
On Tue, Mar 19, 2019 at 02:54:04PM +0000, Robin Murphy wrote:
> The old "cooling-{min,max}-state" properties for thermal bindings were
> ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of:
> thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
> which were later removed entirely by commit e04907dbc259 ("dt-bindings:
> thermal: Remove "cooling-{min|max}-level" properties").
>
> The pwm-fan binding, however, was apparently in-flight in parallel with
> that ratification, and so managed to introduce an example of the old
> properties which escaped the scope of the later cleanup and has thus
> continued to be dutifully copied for new boards despite being useless.
> Clean up these remaining undocumented anachronisms to minimise any
> further confusion.
>
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> Presented as one big hwmon patch for simplicity, but the DT changes
> can quite easily be broken out by platform if maintainers prefer.
>
> Robin.
>
> Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 2 --
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 --
> arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 --
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 --
> arch/arm/boot/dts/imx6qdl-emcon.dtsi | 2 --
> arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 --
> arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 --
> arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 --
> 8 files changed, 16 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> index 49ca5d83ed13..716e84f3bbb2 100644
> --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -12,8 +12,6 @@ Optional properties:
> Example:
> fan0: pwm-fan {
> compatible = "pwm-fan";
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> pwms = <&pwm 0 10000 0>;
> cooling-levels = <0 102 170 230>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index 2bdf899df436..6d400b01d9c9 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -34,8 +34,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 10000 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 102 170 230>;
> };
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index 434a7591ff63..8f9e08f940ab 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -38,8 +38,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 20972 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 5f195ad7e467..93a48f2dda49 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -44,8 +44,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 20972 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> index 397e205551c4..70d26616d771 100644
> --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> @@ -77,8 +77,6 @@
>
> pwm_fan: pwm-fan {
> compatible = "pwm-fan";
> - cooling-min-state = <0>;
> - cooling-max-state = <4>;
> #cooling-cells = <2>;
> pwms = <&pwm4 0 50000>;
> cooling-levels = <0 64 127 191 255>;
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> index b62e96945846..73801b48d1d8 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> @@ -57,8 +57,6 @@
> pwms = <&pwm4 0 45334>;
>
> cooling-levels = <0 64 128 255>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> index 1b35d612b660..cc35c88dafd9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> @@ -56,8 +56,6 @@
> fan: fan@18 {
> compatible = "ti,amc6821";
> reg = <0x18>;
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> #cooling-cells = <2>;
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> index 0130b9f98c9d..490be7a6a851 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> @@ -369,8 +369,6 @@
> fan: fan@18 {
> compatible = "ti,amc6821";
> reg = <0x18>;
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> #cooling-cells = <2>;
> };
>
> --
> 2.20.1.dirty
>
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Robin Murphy <robin.murphy@arm.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
jdelvare@suse.com, heiko@sntech.de, linux-pm@vger.kernel.org,
s.hauer@pengutronix.de, krzk@kernel.org, jonathanh@nvidia.com,
thierry.reding@gmail.com, kgene@kernel.org, shawnguo@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
Date: Tue, 19 Mar 2019 08:00:14 -0700 [thread overview]
Message-ID: <20190319150014.GA29158@roeck-us.net> (raw)
In-Reply-To: <afde4ebd929821d63b5172c8e70e15f0725a4b49.1553006788.git.robin.murphy@arm.com>
On Tue, Mar 19, 2019 at 02:54:04PM +0000, Robin Murphy wrote:
> The old "cooling-{min,max}-state" properties for thermal bindings were
> ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of:
> thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
> which were later removed entirely by commit e04907dbc259 ("dt-bindings:
> thermal: Remove "cooling-{min|max}-level" properties").
>
> The pwm-fan binding, however, was apparently in-flight in parallel with
> that ratification, and so managed to introduce an example of the old
> properties which escaped the scope of the later cleanup and has thus
> continued to be dutifully copied for new boards despite being useless.
> Clean up these remaining undocumented anachronisms to minimise any
> further confusion.
>
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> Presented as one big hwmon patch for simplicity, but the DT changes
> can quite easily be broken out by platform if maintainers prefer.
>
> Robin.
>
> Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 2 --
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 --
> arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 --
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 --
> arch/arm/boot/dts/imx6qdl-emcon.dtsi | 2 --
> arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 --
> arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 --
> arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 --
> 8 files changed, 16 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> index 49ca5d83ed13..716e84f3bbb2 100644
> --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -12,8 +12,6 @@ Optional properties:
> Example:
> fan0: pwm-fan {
> compatible = "pwm-fan";
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> pwms = <&pwm 0 10000 0>;
> cooling-levels = <0 102 170 230>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index 2bdf899df436..6d400b01d9c9 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -34,8 +34,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 10000 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 102 170 230>;
> };
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index 434a7591ff63..8f9e08f940ab 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -38,8 +38,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 20972 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 5f195ad7e467..93a48f2dda49 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -44,8 +44,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 20972 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> index 397e205551c4..70d26616d771 100644
> --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> @@ -77,8 +77,6 @@
>
> pwm_fan: pwm-fan {
> compatible = "pwm-fan";
> - cooling-min-state = <0>;
> - cooling-max-state = <4>;
> #cooling-cells = <2>;
> pwms = <&pwm4 0 50000>;
> cooling-levels = <0 64 127 191 255>;
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> index b62e96945846..73801b48d1d8 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> @@ -57,8 +57,6 @@
> pwms = <&pwm4 0 45334>;
>
> cooling-levels = <0 64 128 255>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> index 1b35d612b660..cc35c88dafd9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> @@ -56,8 +56,6 @@
> fan: fan@18 {
> compatible = "ti,amc6821";
> reg = <0x18>;
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> #cooling-cells = <2>;
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> index 0130b9f98c9d..490be7a6a851 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> @@ -369,8 +369,6 @@
> fan: fan@18 {
> compatible = "ti,amc6821";
> reg = <0x18>;
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> #cooling-cells = <2>;
> };
>
> --
> 2.20.1.dirty
>
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Robin Murphy <robin.murphy@arm.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
jdelvare@suse.com, heiko@sntech.de, linux-pm@vger.kernel.org,
s.hauer@pengutronix.de, krzk@kernel.org, jonathanh@nvidia.com,
thierry.reding@gmail.com, kgene@kernel.org, shawnguo@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
Date: Tue, 19 Mar 2019 08:00:14 -0700 [thread overview]
Message-ID: <20190319150014.GA29158@roeck-us.net> (raw)
In-Reply-To: <afde4ebd929821d63b5172c8e70e15f0725a4b49.1553006788.git.robin.murphy@arm.com>
On Tue, Mar 19, 2019 at 02:54:04PM +0000, Robin Murphy wrote:
> The old "cooling-{min,max}-state" properties for thermal bindings were
> ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of:
> thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
> which were later removed entirely by commit e04907dbc259 ("dt-bindings:
> thermal: Remove "cooling-{min|max}-level" properties").
>
> The pwm-fan binding, however, was apparently in-flight in parallel with
> that ratification, and so managed to introduce an example of the old
> properties which escaped the scope of the later cleanup and has thus
> continued to be dutifully copied for new boards despite being useless.
> Clean up these remaining undocumented anachronisms to minimise any
> further confusion.
>
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> Presented as one big hwmon patch for simplicity, but the DT changes
> can quite easily be broken out by platform if maintainers prefer.
>
> Robin.
>
> Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 2 --
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 --
> arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 --
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 --
> arch/arm/boot/dts/imx6qdl-emcon.dtsi | 2 --
> arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 --
> arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 --
> arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 --
> 8 files changed, 16 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> index 49ca5d83ed13..716e84f3bbb2 100644
> --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -12,8 +12,6 @@ Optional properties:
> Example:
> fan0: pwm-fan {
> compatible = "pwm-fan";
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> pwms = <&pwm 0 10000 0>;
> cooling-levels = <0 102 170 230>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index 2bdf899df436..6d400b01d9c9 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -34,8 +34,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 10000 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 102 170 230>;
> };
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index 434a7591ff63..8f9e08f940ab 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -38,8 +38,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 20972 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 5f195ad7e467..93a48f2dda49 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -44,8 +44,6 @@
> fan0: pwm-fan {
> compatible = "pwm-fan";
> pwms = <&pwm 0 20972 0>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> index 397e205551c4..70d26616d771 100644
> --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
> @@ -77,8 +77,6 @@
>
> pwm_fan: pwm-fan {
> compatible = "pwm-fan";
> - cooling-min-state = <0>;
> - cooling-max-state = <4>;
> #cooling-cells = <2>;
> pwms = <&pwm4 0 50000>;
> cooling-levels = <0 64 127 191 255>;
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> index b62e96945846..73801b48d1d8 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> @@ -57,8 +57,6 @@
> pwms = <&pwm4 0 45334>;
>
> cooling-levels = <0 64 128 255>;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> #cooling-cells = <2>;
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> index 1b35d612b660..cc35c88dafd9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
> @@ -56,8 +56,6 @@
> fan: fan@18 {
> compatible = "ti,amc6821";
> reg = <0x18>;
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> #cooling-cells = <2>;
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> index 0130b9f98c9d..490be7a6a851 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> @@ -369,8 +369,6 @@
> fan: fan@18 {
> compatible = "ti,amc6821";
> reg = <0x18>;
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> #cooling-cells = <2>;
> };
>
> --
> 2.20.1.dirty
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-19 15:00 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 14:54 [PATCH] dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties Robin Murphy
2019-03-19 14:54 ` Robin Murphy
2019-03-19 14:54 ` Robin Murphy
2019-03-19 15:00 ` Guenter Roeck [this message]
2019-03-19 15:00 ` Guenter Roeck
2019-03-19 15:00 ` Guenter Roeck
2019-03-19 15:06 ` Krzysztof Kozlowski
2019-03-19 15:06 ` Krzysztof Kozlowski
2019-03-19 15:06 ` Krzysztof Kozlowski
2019-03-27 16:17 ` Robin Murphy
2019-03-27 16:17 ` Robin Murphy
2019-03-27 16:17 ` Robin Murphy
2019-03-19 15:14 ` Thierry Reding
2019-03-19 15:14 ` Thierry Reding
2019-03-19 15:27 ` Heiko Stübner
2019-03-19 15:27 ` Heiko Stübner
2019-03-19 15:27 ` Heiko Stübner
2019-03-22 0:46 ` Shawn Guo
2019-03-22 0:46 ` Shawn Guo
2019-03-22 0:46 ` Shawn Guo
2019-03-31 6:40 ` Rob Herring
2019-03-31 6:40 ` Rob Herring
2019-03-31 6:40 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319150014.GA29158@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jdelvare@suse.com \
--cc=jonathanh@nvidia.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.