From: kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>,
Hubert Denkmair
<h.denkmair-4pT7WzY1KUiELgA04lAiVw@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
Date: Sun, 24 Mar 2019 17:50:01 +0000 [thread overview]
Message-ID: <20190324175002.28969-9-kernel@martin.sperl.org> (raw)
In-Reply-To: <20190324175002.28969-1-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
From: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
To estimate efficiency add statistics on transfer types
(polling and interrupt) used to debugfs.
Signed-off-by: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
---
drivers/spi/spi-bcm2835aux.c | 61 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index dd0446968da6..d2b58060b333 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
@@ -102,8 +103,57 @@ struct bcm2835aux_spi {
int tx_len;
int rx_len;
int pending;
+
+#if defined(CONFIG_DEBUG_FS)
+#define BCM2835_AUX_INCR(field) ((field)++)
+ u64 count_transfer_polling;
+ u64 count_transfer_irq;
+ u64 count_transfer_irq_after_poll;
+
+ struct dentry *debugfs_dir;
+#else
+#define BCM2835_AUX_INCR(field)
+#endif /* CONFIG_DEBUG_FS */
};
+#if defined(CONFIG_DEBUG_FS)
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
+ const char *dname)
+{
+ char name[64];
+ struct dentry *dir;
+
+ /* get full name */
+ snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname);
+
+ /* the base directory */
+ dir = debugfs_create_dir(name, NULL);
+ bs->debugfs_dir = dir;
+
+ /* the counters */
+ debugfs_create_u64("count_transfer_polling", 0444, dir,
+ &bs->count_transfer_polling);
+ debugfs_create_u64("count_transfer_irq", 0444, dir,
+ &bs->count_transfer_irq);
+ debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir,
+ &bs->count_transfer_irq_after_poll);
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+ debugfs_remove_recursive(bs->debugfs_dir);
+ bs->debugfs_dir = NULL;
+}
+#else
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs)
+{
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
{
return readl(bs->regs + reg);
@@ -242,6 +292,9 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ /* update statistics */
+ BCM2835_AUX_INCR(bs->count_transfer_irq);
+
/* fill in registers and fifos before enabling interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -265,6 +318,9 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
unsigned long timeout;
+ /* update statistics */
+ BCM2835_AUX_INCR(bs->count_transfer_polling);
+
/* configure spi */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -285,6 +341,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
jiffies - timeout,
bs->tx_len, bs->rx_len);
/* forward to interrupt handler */
+ BCM2835_AUX_INCR(bs->count_transfer_irq_after_poll);
return __bcm2835aux_spi_transfer_one_irq(master,
spi, tfr);
}
@@ -531,6 +588,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
goto out_clk_disable;
}
+ bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev));
+
return 0;
out_clk_disable:
@@ -545,6 +604,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ bcm2835aux_debugfs_remove(bs);
+
bcm2835aux_spi_reset_hw(bs);
/* disable the HW block by releasing the clock */
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: kernel@martin.sperl.org
To: Mark Brown <broonie@kernel.org>, Eric Anholt <eric@anholt.net>,
Stefan Wahren <stefan.wahren@i2se.com>,
Hubert Denkmair <h.denkmair@intence.de>,
linux-spi@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Cc: Martin Sperl <kernel@martin.sperl.org>
Subject: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
Date: Sun, 24 Mar 2019 17:50:01 +0000 [thread overview]
Message-ID: <20190324175002.28969-9-kernel@martin.sperl.org> (raw)
In-Reply-To: <20190324175002.28969-1-kernel@martin.sperl.org>
From: Martin Sperl <kernel@martin.sperl.org>
To estimate efficiency add statistics on transfer types
(polling and interrupt) used to debugfs.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
drivers/spi/spi-bcm2835aux.c | 61 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index dd0446968da6..d2b58060b333 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
@@ -102,8 +103,57 @@ struct bcm2835aux_spi {
int tx_len;
int rx_len;
int pending;
+
+#if defined(CONFIG_DEBUG_FS)
+#define BCM2835_AUX_INCR(field) ((field)++)
+ u64 count_transfer_polling;
+ u64 count_transfer_irq;
+ u64 count_transfer_irq_after_poll;
+
+ struct dentry *debugfs_dir;
+#else
+#define BCM2835_AUX_INCR(field)
+#endif /* CONFIG_DEBUG_FS */
};
+#if defined(CONFIG_DEBUG_FS)
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
+ const char *dname)
+{
+ char name[64];
+ struct dentry *dir;
+
+ /* get full name */
+ snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname);
+
+ /* the base directory */
+ dir = debugfs_create_dir(name, NULL);
+ bs->debugfs_dir = dir;
+
+ /* the counters */
+ debugfs_create_u64("count_transfer_polling", 0444, dir,
+ &bs->count_transfer_polling);
+ debugfs_create_u64("count_transfer_irq", 0444, dir,
+ &bs->count_transfer_irq);
+ debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir,
+ &bs->count_transfer_irq_after_poll);
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+ debugfs_remove_recursive(bs->debugfs_dir);
+ bs->debugfs_dir = NULL;
+}
+#else
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs)
+{
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
{
return readl(bs->regs + reg);
@@ -242,6 +292,9 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ /* update statistics */
+ BCM2835_AUX_INCR(bs->count_transfer_irq);
+
/* fill in registers and fifos before enabling interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -265,6 +318,9 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
unsigned long timeout;
+ /* update statistics */
+ BCM2835_AUX_INCR(bs->count_transfer_polling);
+
/* configure spi */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -285,6 +341,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
jiffies - timeout,
bs->tx_len, bs->rx_len);
/* forward to interrupt handler */
+ BCM2835_AUX_INCR(bs->count_transfer_irq_after_poll);
return __bcm2835aux_spi_transfer_one_irq(master,
spi, tfr);
}
@@ -531,6 +588,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
goto out_clk_disable;
}
+ bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev));
+
return 0;
out_clk_disable:
@@ -545,6 +604,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ bcm2835aux_debugfs_remove(bs);
+
bcm2835aux_spi_reset_hw(bs);
/* disable the HW block by releasing the clock */
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-24 17:50 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-24 17:49 [PATCH V2 0/9] spi: bcm2835aux: bug fixes and improvements kernel
2019-03-24 17:49 ` kernel
2019-03-24 17:49 ` [PATCH V2 3/9] spi: bcm2835aux: use BCM2835_AUX_SPI_STAT_RX_LVL kernel
2019-03-24 17:49 ` kernel
2019-03-25 9:52 ` Stefan Wahren
2019-03-25 9:52 ` Stefan Wahren
2019-03-24 17:49 ` [PATCH V2 6/9] spi: bcm2835aux: warn in dmesg that native cs is not really supported kernel
2019-03-24 17:49 ` kernel
2019-03-25 10:28 ` Stefan Wahren
2019-03-25 10:28 ` Stefan Wahren
[not found] ` <20190324175002.28969-1-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2019-03-24 17:49 ` [PATCH V2 1/9] spi: bcm2835aux: unifying code between polling and interrupt driven code kernel-TqfNSX0MhmxHKSADF0wUEw
2019-03-24 17:49 ` kernel
2019-03-24 17:49 ` [PATCH V2 2/9] spi: bcm2835aux: remove dangerous uncontrolled read of fifo kernel-TqfNSX0MhmxHKSADF0wUEw
2019-03-24 17:49 ` kernel
2019-03-24 17:49 ` [PATCH V2 4/9] spi: bcm2835aux: remove dead code kernel-TqfNSX0MhmxHKSADF0wUEw
2019-03-24 17:49 ` kernel
2019-03-24 17:49 ` [PATCH V2 5/9] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios kernel-TqfNSX0MhmxHKSADF0wUEw
2019-03-24 17:49 ` kernel
2019-03-24 17:50 ` [PATCH V2 7/9] spi: bcm2835aux: setup gpio-cs to output and correct level during setup kernel-TqfNSX0MhmxHKSADF0wUEw
2019-03-24 17:50 ` kernel
2019-03-24 17:50 ` kernel-TqfNSX0MhmxHKSADF0wUEw [this message]
2019-03-24 17:50 ` [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs kernel
2019-03-25 9:28 ` Stefan Wahren
2019-03-25 9:28 ` Stefan Wahren
2019-03-25 9:52 ` kernel
2019-03-25 10:06 ` Stefan Wahren
2019-03-25 10:11 ` kernel
2019-03-25 10:45 ` Stefan Wahren
2019-03-24 17:50 ` [PATCH V2 9/9] spi: bcm2835aux: make the polling duration limits configurable kernel-TqfNSX0MhmxHKSADF0wUEw
2019-03-24 17:50 ` kernel
2019-03-25 9:44 ` Stefan Wahren
2019-03-25 9:44 ` Stefan Wahren
2019-03-25 9:49 ` kernel
2019-03-25 9:49 ` kernel
2019-03-25 9:59 ` Stefan Wahren
2019-03-25 9:59 ` Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190324175002.28969-9-kernel@martin.sperl.org \
--to=kernel-tqfnsx0mhmxhksadf0wuew@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
--cc=h.denkmair-4pT7WzY1KUiELgA04lAiVw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=stefan.wahren-eS4NqCHxEME@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.