i.MX6Q FEC stops receive packet

i.MX6Q FEC stops receive packet

[中兴]

[-- Attachment #1: Type: text/plain, Size: 960 bytes --]

Hi all:

Recently, i get the problem in imx6q, under running in linux v4.1.6, the board cannot receive any packet but can send arp packet to network. I find the same problem in web https://community.nxp.com/thread/322882, but cannot to solve my problem. After reading the web replies , I patched with patch from web https://lkml.org/lkml/2016/11/17/945. 

After that, the problem is gone, but another question is still exists that receiver using udp to receive packet from sender with the frequency about 4ms per packet, receiver has not got any packets from sender in some moment, which happened last one second or two ,even more longer. 

And so, after patched the patches of https://lkml.org/lkml/2016/11/17/945,though the G-net workes never be hang, but the value of IEEE_rx_macerr is increasing, so i suspected that the patch is working but not find the root cause of the problem. 

any suggestions will be appreciated!




sung_zhao@qq.com

[-- Attachment #2: Type: text/html, Size: 2597 bytes --]

Re: i.MX6Q FEC stops receive packet

[Fabio Estevam]

On Mon, Mar 25, 2019 at 10:49 AM 中兴 <sung_zhao@qq.com> wrote:
>
> Hi all:
>
> Recently, i get the problem in imx6q, under running in linux v4.1.6, the board cannot receive any packet but can send arp packet to network. I find the same problem in web

Kernel 4.1 is no longer supported. Could you try a more recent kernel
and see if the problem has been solved?

Re: i.MX6Q FEC stops receive packet

[中兴]

[-- Attachment #1: Type: text/plain, Size: 725 bytes --]

OK, I will try it tomorrow.

By the way,  has the problem what i said aleady fixed?what's the root cause? After that , I can fix it in the version i am using.

Thanks a lot.




sung_zhao@qq.com
 
From: Fabio Estevam
Date: 2019-03-25 21:51
To: 中兴
CC: meta-freescale
Subject: Re: [meta-freescale] i.MX6Q FEC stops receive packet
On Mon, Mar 25, 2019 at 10:49 AM 中兴 <sung_zhao@qq.com> wrote:
>
> Hi all:
>
> Recently, i get the problem in imx6q, under running in linux v4.1.6, the board cannot receive any packet but can send arp packet to network. I find the same problem in web
 
Kernel 4.1 is no longer supported. Could you try a more recent kernel
and see if the problem has been solved?
 

[-- Attachment #2: Type: text/html, Size: 2057 bytes --]