[v2,6/6] usb: ohci-da8xx: drop the vbus GPIO

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All users now setup a fixed regulator for the vbus supply. We can drop
the vbus GPIO code.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 35eb2cb96a8f..ef27f9126cca 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -40,7 +40,6 @@ struct da8xx_ohci_hcd {
 	struct phy *usb11_phy;
 	struct regulator *vbus_reg;
 	struct notifier_block nb;
-	struct gpio_desc *vbus_gpio;
 	struct gpio_desc *oc_gpio;
 };
 
@@ -91,11 +90,6 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 	struct device *dev = hcd->self.controller;
 	int ret;
 
-	if (da8xx_ohci->vbus_gpio) {
-		gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, on);
-		return 0;
-	}
-
 	if (!da8xx_ohci->vbus_reg)
 		return 0;
 
@@ -120,9 +114,6 @@ static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 
-	if (da8xx_ohci->vbus_gpio)
-		return gpiod_get_value_cansleep(da8xx_ohci->vbus_gpio);
-
 	if (da8xx_ohci->vbus_reg)
 		return regulator_is_enabled(da8xx_ohci->vbus_reg);
 
@@ -155,9 +146,6 @@ static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 
-	if (da8xx_ohci->vbus_gpio)
-		return 1;
-
 	if (da8xx_ohci->vbus_reg)
 		return 1;
 
@@ -207,9 +195,7 @@ static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data)
 	struct da8xx_ohci_hcd *da8xx_ohci = data;
 
 	if (gpiod_get_value(da8xx_ohci->oc_gpio)) {
-		if (da8xx_ohci->vbus_gpio)
-			gpiod_set_value(da8xx_ohci->vbus_gpio, 0);
-		else if (da8xx_ohci->vbus_reg)
+		if (da8xx_ohci->vbus_reg)
 			return IRQ_WAKE_THREAD;
 	}
 
@@ -437,11 +423,6 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 		}
 	}
 
-	da8xx_ohci->vbus_gpio = devm_gpiod_get_optional(dev, "vbus",
-							GPIOD_OUT_HIGH);
-	if (IS_ERR(da8xx_ohci->vbus_gpio))
-		goto err;
-
 	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
 	if (IS_ERR(da8xx_ohci->oc_gpio))
 		goto err;