From: Trevor Woerner <twoerner@gmail.com>
To: Martin Jansa <martin.jansa@gmail.com>
Cc: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>,
openembeded-devel <Openembedded-devel@lists.openembedded.org>
Subject: Re: [OE-core] glibc broken when linked with gold Was: State of OE World, 2019-03-16
Date: Fri, 29 Mar 2019 10:14:25 -0400 [thread overview]
Message-ID: <20190329141425.GA6015@linux-uys3> (raw)
In-Reply-To: <20190329113734.GA31182@linux-uys3>
An image built with gold fails on the hardware.
I was able to build core-image-minimal with gold enabled:
configuration:
Build Configuration:
BB_VERSION = "1.40.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "opensuseleap-15.0"
TARGET_SYS = "arm-oe-linux-gnueabi"
MACHINE = "imx233-olinuxino-maxi"
DISTRO = "nodistro"
DISTRO_VERSION = "nodistro.0"
TUNE_FEATURES = "arm armv5 thumb dsp"
TARGET_FPU = "soft"
meta-fsl-arm-extra = "master:b4d2c8462220e7038adffc0a151767ef8da07c5d"
meta-freescale = "master:08173f472244817b85fe4af8ab2add7a0090b122"
meta = "master:aeaca9bb1b1c8bf44818945dc4b2cbd6d4b5cef2"
conf/local.conf addition:
DISTRO_FEATURES_append = " ld-is-gold"
When run, the kernel is unable to run init, and panics:
[ 4.050000] Freeing unused kernel memory: 308K
[ 4.050000] This architecture does not have kernel memory protection.
[ 4.060000] Run /sbin/init as init process
[ 4.120000] hub 1-1:1.0: USB hub found
[ 4.130000] hub 1-1:1.0: 3 ports detected
[ 4.140000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 4.140000] CPU: 0 PID: 1 Comm: init Not tainted 5.0.3-fslc+g20d8efe36350 #1
[ 4.140000] Hardware name: Freescale MXS (Device Tree)
[ 4.140000] [<c0010df8>] (unwind_backtrace) from [<c000e730>] (show_stack+0x10/0x14)
[ 4.140000] [<c000e730>] (show_stack) from [<c001a9bc>] (panic+0xec/0x2d8)
[ 4.140000] [<c001a9bc>] (panic) from [<c001d3b0>] (do_exit+0xa44/0xaa4)
[ 4.140000] [<c001d3b0>] (do_exit) from [<c001e65c>] (do_group_exit+0x38/0xbc)
[ 4.140000] [<c001e65c>] (do_group_exit) from [<c002a1c0>] (get_signal+0x110/0x98c)
[ 4.140000] [<c002a1c0>] (get_signal) from [<c000dd6c>] (do_work_pending+0x120/0x5fc)
[ 4.140000] [<c000dd6c>] (do_work_pending) from [<c0009034>] (slow_work_pending+0xc/0x20)
[ 4.140000] Exception stack(0xc343dfb0 to 0xc343dff8)
[ 4.140000] dfa0: bebd7f10 484113c4 00000000 48431fd0
[ 4.140000] dfc0: 00000934 00000000 00000000 00000000 00000000 00000000 00021504 bebd7f0c
[ 4.140000] dfe0: 48431fd0 bebd7ed0 48410a40 484113f4 00000010 ffffffff
[ 4.140000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
WARNING: multiple messages have this Message-ID (diff)
From: Trevor Woerner <twoerner@gmail.com>
To: Martin Jansa <martin.jansa@gmail.com>
Cc: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>,
openembeded-devel <Openembedded-devel@lists.openembedded.org>
Subject: Re: glibc broken when linked with gold Was: [oe] State of OE World, 2019-03-16
Date: Fri, 29 Mar 2019 10:14:25 -0400 [thread overview]
Message-ID: <20190329141425.GA6015@linux-uys3> (raw)
In-Reply-To: <20190329113734.GA31182@linux-uys3>
An image built with gold fails on the hardware.
I was able to build core-image-minimal with gold enabled:
configuration:
Build Configuration:
BB_VERSION = "1.40.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "opensuseleap-15.0"
TARGET_SYS = "arm-oe-linux-gnueabi"
MACHINE = "imx233-olinuxino-maxi"
DISTRO = "nodistro"
DISTRO_VERSION = "nodistro.0"
TUNE_FEATURES = "arm armv5 thumb dsp"
TARGET_FPU = "soft"
meta-fsl-arm-extra = "master:b4d2c8462220e7038adffc0a151767ef8da07c5d"
meta-freescale = "master:08173f472244817b85fe4af8ab2add7a0090b122"
meta = "master:aeaca9bb1b1c8bf44818945dc4b2cbd6d4b5cef2"
conf/local.conf addition:
DISTRO_FEATURES_append = " ld-is-gold"
When run, the kernel is unable to run init, and panics:
[ 4.050000] Freeing unused kernel memory: 308K
[ 4.050000] This architecture does not have kernel memory protection.
[ 4.060000] Run /sbin/init as init process
[ 4.120000] hub 1-1:1.0: USB hub found
[ 4.130000] hub 1-1:1.0: 3 ports detected
[ 4.140000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 4.140000] CPU: 0 PID: 1 Comm: init Not tainted 5.0.3-fslc+g20d8efe36350 #1
[ 4.140000] Hardware name: Freescale MXS (Device Tree)
[ 4.140000] [<c0010df8>] (unwind_backtrace) from [<c000e730>] (show_stack+0x10/0x14)
[ 4.140000] [<c000e730>] (show_stack) from [<c001a9bc>] (panic+0xec/0x2d8)
[ 4.140000] [<c001a9bc>] (panic) from [<c001d3b0>] (do_exit+0xa44/0xaa4)
[ 4.140000] [<c001d3b0>] (do_exit) from [<c001e65c>] (do_group_exit+0x38/0xbc)
[ 4.140000] [<c001e65c>] (do_group_exit) from [<c002a1c0>] (get_signal+0x110/0x98c)
[ 4.140000] [<c002a1c0>] (get_signal) from [<c000dd6c>] (do_work_pending+0x120/0x5fc)
[ 4.140000] [<c000dd6c>] (do_work_pending) from [<c0009034>] (slow_work_pending+0xc/0x20)
[ 4.140000] Exception stack(0xc343dfb0 to 0xc343dff8)
[ 4.140000] dfa0: bebd7f10 484113c4 00000000 48431fd0
[ 4.140000] dfc0: 00000934 00000000 00000000 00000000 00000000 00000000 00021504 bebd7f0c
[ 4.140000] dfe0: 48431fd0 bebd7ed0 48410a40 484113f4 00000010 ffffffff
[ 4.140000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
next prev parent reply other threads:[~2019-03-29 14:14 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-17 15:26 State of OE World, 2019-03-16 Khem Raj
2019-03-17 16:46 ` akuster808
2019-03-17 19:56 ` Khem Raj
2019-03-27 16:17 ` Martin Jansa
2019-03-27 16:35 ` Martin Jansa
2019-03-27 20:39 ` Martin Jansa
2019-03-27 22:32 ` glibc broken when linked with gold Was: " Martin Jansa
2019-03-27 22:32 ` glibc broken when linked with gold Was: [oe] " Martin Jansa
2019-03-28 5:08 ` glibc broken when linked with gold Was: " Khem Raj
2019-03-28 5:08 ` glibc broken when linked with gold Was: [oe] " Khem Raj
2019-03-28 14:40 ` glibc broken when linked with gold Was: " Martin Jansa
2019-03-28 14:40 ` glibc broken when linked with gold Was: [oe] " Martin Jansa
2019-03-29 11:37 ` [OE-core] glibc broken when linked with gold Was: " Trevor Woerner
2019-03-29 11:37 ` glibc broken when linked with gold Was: [oe] " Trevor Woerner
2019-03-29 14:14 ` Trevor Woerner [this message]
2019-03-29 14:14 ` Trevor Woerner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190329141425.GA6015@linux-uys3 \
--to=twoerner@gmail.com \
--cc=Openembedded-devel@lists.openembedded.org \
--cc=martin.jansa@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.