From: Thierry Reding <thierry.reding@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>,
linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/6] arm64: tegra: Remove regulator hacks on Jetson TX2
Date: Mon, 1 Apr 2019 12:40:50 +0200 [thread overview]
Message-ID: <20190401104050.31355-7-thierry.reding@gmail.com> (raw)
In-Reply-To: <20190401104050.31355-1-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
Various regulators were marked as always-on for Jetson TX2. At this
point, all of the regulators are properly hooked up, so this workaround
is no longer required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 23 -------------------
1 file changed, 23 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 952062f0b9a9..64686b033c38 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -268,43 +268,30 @@
regulator-name = "AVDD_DSI_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8: sd2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_3v3_sys: sd3 {
regulator-name = "VDD_3V3_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8_pll: ldo0 {
regulator-name = "VDD_1V8_AP_PLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
ldo2 {
regulator-name = "VDDIO_3V3_AOHV";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
regulator-always-on;
regulator-boot-on;
};
@@ -331,18 +318,12 @@
regulator-name = "VDD_HDMI_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_pex: ldo8 {
regulator-name = "VDD_PEX_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
};
};
@@ -390,10 +371,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
-
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>,
linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [v2,6/6] arm64: tegra: Remove regulator hacks on Jetson TX2
Date: Mon, 1 Apr 2019 12:40:50 +0200 [thread overview]
Message-ID: <20190401104050.31355-7-thierry.reding@gmail.com> (raw)
From: Thierry Reding <treding@nvidia.com>
Various regulators were marked as always-on for Jetson TX2. At this
point, all of the regulators are properly hooked up, so this workaround
is no longer required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 23 -------------------
1 file changed, 23 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 952062f0b9a9..64686b033c38 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -268,43 +268,30 @@
regulator-name = "AVDD_DSI_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8: sd2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_3v3_sys: sd3 {
regulator-name = "VDD_3V3_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8_pll: ldo0 {
regulator-name = "VDD_1V8_AP_PLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
ldo2 {
regulator-name = "VDDIO_3V3_AOHV";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
regulator-always-on;
regulator-boot-on;
};
@@ -331,18 +318,12 @@
regulator-name = "VDD_HDMI_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_pex: ldo8 {
regulator-name = "VDD_PEX_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
};
};
@@ -390,10 +371,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
-
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
next prev parent reply other threads:[~2019-04-01 10:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-01 10:40 [PATCH v2 0/6] usb: host: xhci-tegra: Add Tegra186 XUSB support Thierry Reding
2019-04-01 10:40 ` [PATCH v2 1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support Thierry Reding
2019-04-01 10:40 ` [v2,1/6] " Thierry Reding
2019-04-01 10:40 ` [PATCH v2 2/6] usb: host: xhci-tegra: Selectively program IPFS Thierry Reding
2019-04-01 10:40 ` [v2,2/6] " Thierry Reding
2019-04-01 10:40 ` [PATCH v2 3/6] usb: host: xhci-tegra: Add Tegra186 XUSB support Thierry Reding
2019-04-01 10:40 ` [v2,3/6] " Thierry Reding
2019-04-01 10:40 ` [PATCH v2 4/6] arm64: tegra: Add XUSB and pad controller on Tegra186 Thierry Reding
2019-04-01 10:40 ` [v2,4/6] " Thierry Reding
2019-04-01 10:40 ` [PATCH v2 5/6] arm64: tegra: Enable XUSB on P2771 Thierry Reding
2019-04-01 10:40 ` [v2,5/6] " Thierry Reding
2019-04-01 10:40 ` Thierry Reding [this message]
2019-04-01 10:40 ` [v2,6/6] arm64: tegra: Remove regulator hacks on Jetson TX2 Thierry Reding
2019-04-08 8:17 ` [PATCH v2 0/6] usb: host: xhci-tegra: Add Tegra186 XUSB support Thierry Reding
2019-04-08 14:07 ` Alan Stern
2019-04-08 14:07 ` Alan Stern
2019-04-08 15:02 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190401104050.31355-7-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.