* [PATCH v2 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>
[not found] <20190312204217.73296-1-mka@chromium.org>
@ 2019-03-12 20:42 ` Matthias Kaehlcke
2019-04-01 7:46 ` Balakrishna Godavarthi
2019-03-12 20:42 ` [PATCH v2 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event Matthias Kaehlcke
1 sibling, 1 reply; 4+ messages in thread
From: Matthias Kaehlcke @ 2019-03-12 20:42 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg
Cc: linux-bluetooth, linux-kernel, Balakrishna Godavarthi, Hemantg,
Rocky Liao, Harish Bandi, Matthias Kaehlcke
Rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IN_BAND_SLEEP_ENABLED.
The constant represents a flag (multiple flags can be set at once),
not a unique state of the controller or driver.
Also make the flag an enum value instead of a pre-processor constant
(more flags will be added to the enum group by another patch).
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v2:
- don't use BIT()
- change to enum type
- updated commit message
---
drivers/bluetooth/hci_qca.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 237aea34b69f..1b7ba9e9e08a 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -54,9 +54,6 @@
#define HCI_IBS_WAKE_ACK 0xFC
#define HCI_MAX_IBS_SIZE 10
-/* Controller states */
-#define STATE_IN_BAND_SLEEP_ENABLED 1
-
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
#define IBS_TX_IDLE_TIMEOUT_MS 2000
#define CMD_TRANS_TIMEOUT_MS 100
@@ -67,6 +64,10 @@
/* Controller debug log header */
#define QCA_DEBUG_HANDLE 0x2EDC
+enum qca_flags {
+ QCA_IN_BAND_SLEEP_ENABLED,
+};
+
/* HCI_IBS transmit side sleep protocol states */
enum tx_ibs_states {
HCI_IBS_TX_ASLEEP,
@@ -775,7 +776,7 @@ static int qca_enqueue(struct hci_uart *hu, struct
sk_buff *skb)
/* Don't go to sleep in middle of patch download or
* Out-Of-Band(GPIOs control) sleep is selected.
*/
- if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
+ if (!test_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
skb_queue_tail(&qca->txq, skb);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
return 0;
@@ -1192,7 +1193,7 @@ static int qca_setup(struct hci_uart *hu)
return ret;
/* Patch downloading has to be done without IBS mode */
- clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ clear_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags);
if (qcadev->btsoc_type == QCA_WCN3990) {
bt_dev_info(hdev, "setting up wcn3990");
@@ -1236,7 +1237,7 @@ static int qca_setup(struct hci_uart *hu)
/* Setup patch / NVM configurations */
ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
if (!ret) {
- set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ set_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
} else if (ret == -ENOENT) {
/* No patch/nvm-config found, run with original fw/config */
@@ -1294,7 +1295,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
* data in skb's.
*/
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
- clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ clear_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_flush(hu);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
--
2.21.0.360.g471c308f928-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event
[not found] <20190312204217.73296-1-mka@chromium.org>
2019-03-12 20:42 ` [PATCH v2 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags> Matthias Kaehlcke
@ 2019-03-12 20:42 ` Matthias Kaehlcke
1 sibling, 0 replies; 4+ messages in thread
From: Matthias Kaehlcke @ 2019-03-12 20:42 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg
Cc: linux-bluetooth, linux-kernel, Balakrishna Godavarthi, Hemantg,
Rocky Liao, Harish Bandi, Matthias Kaehlcke
Firmware download to the WCN3990 often fails with a 'TLV response size
mismatch' error:
[ 133.064659] Bluetooth: hci0: setting up wcn3990
[ 133.489150] Bluetooth: hci0: QCA controller version 0x02140201
[ 133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[ 133.507214] Bluetooth: hci0: QCA TLV response size mismatch
[ 133.513265] Bluetooth: hci0: QCA Failed to download patch (-84)
This is caused by a vendor event that corresponds to an earlier command
to change the baudrate. The event is not processed in the context of the
baudrate change and is later interpreted as response to the firmware
download command (which is also a vendor command), but the driver detects
that the event doesn't have the expected amount of associated data.
More details:
For the WCN3990 the vendor command for a baudrate change isn't sent as
synchronous HCI command, because the controller sends the corresponding
vendor event with the new baudrate. The event is received and decoded
after the baudrate change of the host port.
Identify the 'unused' event when it is received and don't add it to
the queue of RX frames.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v2:
- make QCA_DROP_VENDOR_EVENT an enum value and don't use BIT()
- free skb in qca_recv_event()
- add barriers to ensure qca_recv_event() sees updated flags
- return -ETIMEDOUT instead of -EPROTO if the vendor event isn't
received in time
---
drivers/bluetooth/hci_qca.c | 58 +++++++++++++++++++++++++++++++++++--
1 file changed, 55 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 1b7ba9e9e08a..99963ec4f565 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -66,6 +67,7 @@
enum qca_flags {
QCA_IN_BAND_SLEEP_ENABLED,
+ QCA_DROP_VENDOR_EVENT,
};
/* HCI_IBS transmit side sleep protocol states */
@@ -110,6 +112,7 @@ struct qca_data {
struct work_struct ws_rx_vote_off;
struct work_struct ws_tx_vote_off;
unsigned long flags;
+ struct completion drop_ev_comp;
/* For debugging purpose */
u64 ibs_sent_wacks;
@@ -476,6 +479,7 @@ static int qca_open(struct hci_uart *hu)
INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
qca->hu = hu;
+ init_completion(&qca->drop_ev_comp);
/* Assume we start with both sides asleep -- extra wakes OK */
qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
@@ -868,6 +872,35 @@ static int qca_recv_acl_data(struct hci_dev
*hdev, struct sk_buff *skb)
return hci_recv_frame(hdev, skb);
}
+static int qca_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct qca_data *qca = hu->priv;
+
+ if (test_bit(QCA_DROP_VENDOR_EVENT, &qca->flags)) {
+ struct hci_event_hdr *hdr = (void *)skb->data;
+
+ /* For the WCN3990 the vendor command for a baudrate change
+ * isn't sent as synchronous HCI command, because the
+ * controller sends the corresponding vendor event with the
+ * new baudrate. The event is received and properly decoded
+ * after changing the baudrate of the host port. It needs to
+ * be dropped, otherwise it can be misinterpreted as
+ * response to a later firmware download command (also a
+ * vendor command).
+ */
+
+ if (hdr->evt == HCI_EV_VENDOR)
+ complete(&qca->drop_ev_comp);
+
+ kfree(skb);
+
+ return 0;
+ }
+
+ return hci_recv_frame(hdev, skb);
+}
+
#define QCA_IBS_SLEEP_IND_EVENT \
.type = HCI_IBS_SLEEP_IND, \
.hlen = 0, \
@@ -892,7 +925,7 @@ static int qca_recv_acl_data(struct hci_dev *hdev,
struct sk_buff *skb)
static const struct h4_recv_pkt qca_recv_pkts[] = {
{ H4_RECV_ACL, .recv = qca_recv_acl_data },
{ H4_RECV_SCO, .recv = hci_recv_frame },
- { H4_RECV_EVENT, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = qca_recv_event },
{ QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
{ QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
{ QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
@@ -1093,6 +1126,7 @@ static int qca_set_speed(struct hci_uart *hu,
enum qca_speed_type speed_type)
{
unsigned int speed, qca_baudrate;
struct qca_serdev *qcadev;
+ struct qca_data *qca = hu->priv;
int ret = 0;
if (speed_type == QCA_INIT_SPEED) {
@@ -1108,8 +1142,12 @@ static int qca_set_speed(struct hci_uart *hu,
enum qca_speed_type speed_type)
* changing the baudrate of chip and host.
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qcadev->btsoc_type == QCA_WCN3990)
+ if (qcadev->btsoc_type == QCA_WCN3990) {
hci_uart_set_flow_control(hu, true);
+ reinit_completion(&qca->drop_ev_comp);
+ set_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+ smp_mb__after_atomic();
+ }
qca_baudrate = qca_get_baudrate_value(speed);
bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
@@ -1120,8 +1158,22 @@ static int qca_set_speed(struct hci_uart *hu,
enum qca_speed_type speed_type)
host_set_baudrate(hu, speed);
error:
- if (qcadev->btsoc_type == QCA_WCN3990)
+ if (qcadev->btsoc_type == QCA_WCN3990) {
hci_uart_set_flow_control(hu, false);
+
+ /* Wait for the controller to send the vendor event
+ * for the baudrate change command.
+ */
+ if (!wait_for_completion_timeout(&qca->drop_ev_comp,
+ msecs_to_jiffies(100))) {
+ bt_dev_err(hu->hdev,
+ "Failed to change controller baudrate\n");
+ ret = -ETIMEDOUT;
+ }
+
+ clear_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+ smp_mb__after_atomic();
+ }
}
return ret;
--
2.21.0.360.g471c308f928-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread