All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Richard Weinberger <richard@nod.at>,
	Marek Vasut <marek.vasut@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mtd@lists.infradead.org,
	Brian Norris <computersforpeace@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/3] mtd: rawnand: sunxi: Add DMA support for sun8i
Date: Fri, 5 Apr 2019 14:25:54 +0200	[thread overview]
Message-ID: <20190405142554.44e3da68@xps13> (raw)
In-Reply-To: <20190405105559.sqdhoa54ne7l4svj@flea>


[-- Attachment #1.1: Type: text/plain, Size: 2679 bytes --]

Hi Maxime,

Maxime Ripard <maxime.ripard@bootlin.com> wrote on Fri, 5 Apr 2019
12:55:59 +0200:

> On Fri, Apr 05, 2019 at 11:37:42AM +0200, Miquel Raynal wrote:
> > Hi Maxime,
> >
> > Maxime Ripard <maxime.ripard@bootlin.com> wrote on Fri, 5 Apr 2019
> > 11:16:07 +0200:
> >  
> > > On Thu, Apr 04, 2019 at 06:21:10PM +0200, Miquel Raynal wrote:  
> > > > Allwinner NAND controllers can make use of DMA to enhance the I/O
> > > > throughput thanks to ECC pipelining. DMA handling with sun8i NAND IP
> > > > is a bit different than with the older SoCs, hence the introduction of
> > > > a new compatible to handle:
> > > > * the differences between register offsets,
> > > > * the burst length change from 4 to minimum 8,
> > > > * drive SRAM accesses through the AHB bus instead of the MBUS.
> > > >
> > > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > > > ---
> > > >  drivers/mtd/nand/raw/sunxi_nand.c | 75 ++++++++++++++++++++++++++++---
> > > >  1 file changed, 68 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
> > > > index 4282bc477761..49cd5067adaa 100644
> > > > --- a/drivers/mtd/nand/raw/sunxi_nand.c
> > > > +++ b/drivers/mtd/nand/raw/sunxi_nand.c
> > > > @@ -42,7 +42,8 @@
> > > >  #define NFC_REG_CMD		0x0024
> > > >  #define NFC_REG_RCMD_SET	0x0028
> > > >  #define NFC_REG_WCMD_SET	0x002C
> > > > -#define NFC_REG_IO_DATA		0x0030
> > > > +#define NFC_REG_A10_IO_DATA	0x0030
> > > > +#define NFC_REG_A33_IO_DATA	0x0300
> > > >  #define NFC_REG_ECC_CTL		0x0034
> > > >  #define NFC_REG_ECC_ST		0x0038
> > > >  #define NFC_REG_DEBUG		0x003C
> > > > @@ -200,6 +201,22 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
> > > >  	return container_of(nand, struct sunxi_nand_chip, nand);
> > > >  }
> > > >
> > > > +/*
> > > > + * NAND Controller capabilities structure: stores NAND controller capabilities
> > > > + * for distinction between compatible strings.
> > > > + *
> > > > + * @sram_through_ahb:	On A33, we choose to access the internal RAM through AHB
> > > > + *                      instead of MBUS (less configuration). A10+ use the MBUS  
> > >
> > > What do you mean by A10+ ?  
> >
> > I meant A1x, A2x SoCs. Not sure it matches a product line for you, so
> > please suggest something to mean "SoCs which are not A33" (so far I
> > think all worked without this).  
> 
> The list is pretty small, so we can just name them. That would be the
> A10, A10s A13 and A20.

You really need a "A10+"-like acronym for these ;)

Ok, I'll add the list.


Thanks,
Miquèl

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Richard Weinberger <richard@nod.at>,
	Marek Vasut <marek.vasut@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mtd@lists.infradead.org,
	Brian Norris <computersforpeace@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/3] mtd: rawnand: sunxi: Add DMA support for sun8i
Date: Fri, 5 Apr 2019 14:25:54 +0200	[thread overview]
Message-ID: <20190405142554.44e3da68@xps13> (raw)
In-Reply-To: <20190405105559.sqdhoa54ne7l4svj@flea>


[-- Attachment #1.1: Type: text/plain, Size: 2679 bytes --]

Hi Maxime,

Maxime Ripard <maxime.ripard@bootlin.com> wrote on Fri, 5 Apr 2019
12:55:59 +0200:

> On Fri, Apr 05, 2019 at 11:37:42AM +0200, Miquel Raynal wrote:
> > Hi Maxime,
> >
> > Maxime Ripard <maxime.ripard@bootlin.com> wrote on Fri, 5 Apr 2019
> > 11:16:07 +0200:
> >  
> > > On Thu, Apr 04, 2019 at 06:21:10PM +0200, Miquel Raynal wrote:  
> > > > Allwinner NAND controllers can make use of DMA to enhance the I/O
> > > > throughput thanks to ECC pipelining. DMA handling with sun8i NAND IP
> > > > is a bit different than with the older SoCs, hence the introduction of
> > > > a new compatible to handle:
> > > > * the differences between register offsets,
> > > > * the burst length change from 4 to minimum 8,
> > > > * drive SRAM accesses through the AHB bus instead of the MBUS.
> > > >
> > > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > > > ---
> > > >  drivers/mtd/nand/raw/sunxi_nand.c | 75 ++++++++++++++++++++++++++++---
> > > >  1 file changed, 68 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
> > > > index 4282bc477761..49cd5067adaa 100644
> > > > --- a/drivers/mtd/nand/raw/sunxi_nand.c
> > > > +++ b/drivers/mtd/nand/raw/sunxi_nand.c
> > > > @@ -42,7 +42,8 @@
> > > >  #define NFC_REG_CMD		0x0024
> > > >  #define NFC_REG_RCMD_SET	0x0028
> > > >  #define NFC_REG_WCMD_SET	0x002C
> > > > -#define NFC_REG_IO_DATA		0x0030
> > > > +#define NFC_REG_A10_IO_DATA	0x0030
> > > > +#define NFC_REG_A33_IO_DATA	0x0300
> > > >  #define NFC_REG_ECC_CTL		0x0034
> > > >  #define NFC_REG_ECC_ST		0x0038
> > > >  #define NFC_REG_DEBUG		0x003C
> > > > @@ -200,6 +201,22 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
> > > >  	return container_of(nand, struct sunxi_nand_chip, nand);
> > > >  }
> > > >
> > > > +/*
> > > > + * NAND Controller capabilities structure: stores NAND controller capabilities
> > > > + * for distinction between compatible strings.
> > > > + *
> > > > + * @sram_through_ahb:	On A33, we choose to access the internal RAM through AHB
> > > > + *                      instead of MBUS (less configuration). A10+ use the MBUS  
> > >
> > > What do you mean by A10+ ?  
> >
> > I meant A1x, A2x SoCs. Not sure it matches a product line for you, so
> > please suggest something to mean "SoCs which are not A33" (so far I
> > think all worked without this).  
> 
> The list is pretty small, so we can just name them. That would be the
> A10, A10s A13 and A20.

You really need a "A10+"-like acronym for these ;)

Ok, I'll add the list.


Thanks,
Miquèl

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-04-05 12:26 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-04 16:21 [PATCH 0/3] Sun8i NAND DMA support Miquel Raynal
2019-04-04 16:21 ` Miquel Raynal
2019-04-04 16:21 ` [PATCH 1/3] dt-bindings: mtd: sunxi: Add new compatible Miquel Raynal
2019-04-04 16:21   ` Miquel Raynal
2019-04-04 16:21   ` Miquel Raynal
2019-04-05  9:13   ` Maxime Ripard
2019-04-05  9:13     ` Maxime Ripard
2019-04-05  9:28     ` Miquel Raynal
2019-04-05  9:28       ` Miquel Raynal
2019-04-05  9:56       ` Maxime Ripard
2019-04-05  9:56         ` Maxime Ripard
2019-04-04 16:21 ` [PATCH 2/3] mtd: rawnand: sunxi: Add DMA support for sun8i Miquel Raynal
2019-04-04 16:21   ` Miquel Raynal
2019-04-04 16:21   ` Miquel Raynal
2019-04-05  9:16   ` Maxime Ripard
2019-04-05  9:16     ` Maxime Ripard
2019-04-05  9:37     ` Miquel Raynal
2019-04-05  9:37       ` Miquel Raynal
2019-04-05 10:55       ` Maxime Ripard
2019-04-05 10:55         ` Maxime Ripard
2019-04-05 12:25         ` Miquel Raynal [this message]
2019-04-05 12:25           ` Miquel Raynal
2019-04-05 12:47           ` Maxime Ripard
2019-04-05 12:47             ` Maxime Ripard
2019-04-14  9:05   ` Boris Brezillon
2019-04-14  9:05     ` Boris Brezillon
2019-04-14  9:05     ` Boris Brezillon
2019-04-15  6:58     ` Miquel Raynal
2019-04-15  6:58       ` Miquel Raynal
2019-04-15  7:14       ` Boris Brezillon
2019-04-15  7:14         ` Boris Brezillon
2019-04-15  7:14         ` Boris Brezillon
2019-04-16 16:53         ` Miquel Raynal
2019-04-16 16:53           ` Miquel Raynal
2019-04-04 16:21 ` [PATCH 3/3] ARM: dts: sunxi: Improve sun8i NAND transfers by using DMA Miquel Raynal
2019-04-04 16:21   ` Miquel Raynal
2019-04-05  9:18   ` Maxime Ripard
2019-04-05  9:18     ` Maxime Ripard
2019-04-05  9:38     ` Miquel Raynal
2019-04-05  9:38       ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190405142554.44e3da68@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.