* [PATCH v2 0/2] Initial CephFS tests @ 2019-04-05 14:53 Luis Henriques 2019-04-05 14:53 ` [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota Luis Henriques 2019-04-05 14:53 ` [PATCH v2 2/2] ceph: test basic ceph.quota.max_bytes quota Luis Henriques 0 siblings, 2 replies; 5+ messages in thread From: Luis Henriques @ 2019-04-05 14:53 UTC (permalink / raw) To: fstests; +Cc: Yan, Zheng, Dave Chinner, ceph-devel, Luis Henriques Hi all, This is the first attempt to (finally!) add CephFS specific tests to fstests. Hopefully, more will follow once an initial set is accepted -- I do have a few more that could easily be added, and I'm sure that in the future more CephFS-specific tests can continue to be developed. This test suite has already proved to be quite useful in finding bugs in this filesystem; adding specific tests for it is just the next logic step. For now, just two simple tests to do some basic checks on quotas features. Cheers, -- Luis Changes since v1 (RFC): Both tests refactored: - use 'workdir' instead of 'testdir' and initialize it to $seq - don't remove $workdir on cleanup() - use output to validate test results instead of _fail Luis Henriques (2): ceph: test basic ceph.quota.max_files quota ceph: test basic ceph.quota.max_bytes quota tests/ceph/001 | 86 ++++++++++++++++++++++++++++++ tests/ceph/001.out | 9 ++++ tests/ceph/002 | 125 ++++++++++++++++++++++++++++++++++++++++++++ tests/ceph/002.out | 64 +++++++++++++++++++++++ tests/ceph/Makefile | 20 +++++++ tests/ceph/group | 2 + 6 files changed, 306 insertions(+) create mode 100755 tests/ceph/001 create mode 100644 tests/ceph/001.out create mode 100755 tests/ceph/002 create mode 100644 tests/ceph/002.out create mode 100644 tests/ceph/Makefile create mode 100644 tests/ceph/group ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota 2019-04-05 14:53 [PATCH v2 0/2] Initial CephFS tests Luis Henriques @ 2019-04-05 14:53 ` Luis Henriques 2019-04-06 12:45 ` Eryu Guan 2019-04-05 14:53 ` [PATCH v2 2/2] ceph: test basic ceph.quota.max_bytes quota Luis Henriques 1 sibling, 1 reply; 5+ messages in thread From: Luis Henriques @ 2019-04-05 14:53 UTC (permalink / raw) To: fstests; +Cc: Yan, Zheng, Dave Chinner, ceph-devel, Luis Henriques Simple set of checks for CephFS max_files directory quota implementation. Signed-off-by: Luis Henriques <lhenriques@suse.com> --- tests/ceph/001 | 86 +++++++++++++++++++++++++++++++++++++++++++++ tests/ceph/001.out | 9 +++++ tests/ceph/Makefile | 20 +++++++++++ tests/ceph/group | 1 + 4 files changed, 116 insertions(+) create mode 100755 tests/ceph/001 create mode 100644 tests/ceph/001.out create mode 100644 tests/ceph/Makefile create mode 100644 tests/ceph/group diff --git a/tests/ceph/001 b/tests/ceph/001 new file mode 100755 index 000000000000..770e952cd8dc --- /dev/null +++ b/tests/ceph/001 @@ -0,0 +1,86 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. +# +# FS QA Test No. 001 +# +# Test basic ceph.quota.max_files quota features. +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +workdir=$TEST_DIR/$seq + +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr + +# real QA test starts here +_supported_os Linux +_supported_fs ceph + +_require_attrs + +set_quota() +{ + val=$1 + dir=$2 + $SETFATTR_PROG -n ceph.quota.max_files -v $val $dir >/dev/null 2>&1 +} +get_quota() +{ + dir=$1 + $GETFATTR_PROG -n ceph.quota.max_files $dir 2> /dev/null +} + +rm -rf $workdir +mkdir $workdir + +# test setting quota +set_quota 10 $workdir +get_quota $workdir + +# set quota to largest acceptable value (0x7FFFFFFFFFFFFFFF) +set_quota 9223372036854775807 $workdir +get_quota $workdir + +# test resetting quota +set_quota 0 $workdir +get_quota $workdir + +# set quota to invalid values (0x8000000000000000 and -1) +set_quota 9223372036854775808 $workdir +get_quota $workdir + +set_quota -1 $workdir +get_quota $workdir + +set_quota 5 $workdir +mkdir $workdir/0 +touch $workdir/0/1 +touch $workdir/0/2 +touch $workdir/3 + +touch $workdir/4 2>&1 | _filter_test_dir # should fail +mkdir $workdir/5 2>&1 | _filter_test_dir # should fail + +set_quota 0 $workdir +touch $workdir/4 # shouldn't fail +mkdir $workdir/5 # shouldn't fail + +# success, all done +status=0 +exit diff --git a/tests/ceph/001.out b/tests/ceph/001.out new file mode 100644 index 000000000000..6ddb007dce22 --- /dev/null +++ b/tests/ceph/001.out @@ -0,0 +1,9 @@ +QA output created by 001 +# file: mnt/test/001 +ceph.quota.max_files="10" + +# file: mnt/test/001 +ceph.quota.max_files="9223372036854775807" + +touch: cannot touch 'TEST_DIR/001/4': Disk quota exceeded +mkdir: cannot create directory 'TEST_DIR/001/5': Disk quota exceeded diff --git a/tests/ceph/Makefile b/tests/ceph/Makefile new file mode 100644 index 000000000000..f93862af4f31 --- /dev/null +++ b/tests/ceph/Makefile @@ -0,0 +1,20 @@ +# +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. +# + +TOPDIR = ../.. +include $(TOPDIR)/include/builddefs + +CEPHFS_DIR = cephfs +TARGET_DIR = $(PKG_LIB_DIR)/$(TESTS_DIR)/$(CEPHFS_DIR) + +include $(BUILDRULES) + +install: + $(INSTALL) -m 755 -d $(TARGET_DIR) + $(INSTALL) -m 755 $(TESTS) $(TARGET_DIR) + $(INSTALL) -m 644 group $(TARGET_DIR) + $(INSTALL) -m 644 $(OUTFILES) $(TARGET_DIR) + +# Nothing. +install-dev install-lib: diff --git a/tests/ceph/group b/tests/ceph/group new file mode 100644 index 000000000000..e389bc6ec7ee --- /dev/null +++ b/tests/ceph/group @@ -0,0 +1 @@ +001 auto quick quota ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota 2019-04-05 14:53 ` [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota Luis Henriques @ 2019-04-06 12:45 ` Eryu Guan 2019-04-08 9:16 ` Luis Henriques 0 siblings, 1 reply; 5+ messages in thread From: Eryu Guan @ 2019-04-06 12:45 UTC (permalink / raw) To: Luis Henriques; +Cc: fstests, Yan, Zheng, Dave Chinner, ceph-devel On Fri, Apr 05, 2019 at 03:53:04PM +0100, Luis Henriques wrote: > Simple set of checks for CephFS max_files directory quota implementation. > > Signed-off-by: Luis Henriques <lhenriques@suse.com> Just some quick/random comments inline, because I don't have a ceph env to actually test the patches.. > --- > tests/ceph/001 | 86 +++++++++++++++++++++++++++++++++++++++++++++ > tests/ceph/001.out | 9 +++++ > tests/ceph/Makefile | 20 +++++++++++ > tests/ceph/group | 1 + > 4 files changed, 116 insertions(+) > create mode 100755 tests/ceph/001 > create mode 100644 tests/ceph/001.out > create mode 100644 tests/ceph/Makefile > create mode 100644 tests/ceph/group > > diff --git a/tests/ceph/001 b/tests/ceph/001 > new file mode 100755 > index 000000000000..770e952cd8dc > --- /dev/null > +++ b/tests/ceph/001 > @@ -0,0 +1,86 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. > +# > +# FS QA Test No. 001 > +# > +# Test basic ceph.quota.max_files quota features. > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +workdir=$TEST_DIR/$seq > + > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -rf $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/attr > + > +# real QA test starts here > +_supported_os Linux > +_supported_fs ceph > + > +_require_attrs > + > +set_quota() > +{ > + val=$1 > + dir=$2 Declare function local variables as 'local'. > + $SETFATTR_PROG -n ceph.quota.max_files -v $val $dir >/dev/null 2>&1 I think it's better to dump the outputs from $SETFATTR_PROG to $seqres.full, so we have debug logs when something went wrong. e.g. $SETFATTR_PROG -n ceph.quota.max_files -v $val $dir >>$seqres.full 2>&1 Also, remove $seqres.full file before test. > +} > +get_quota() > +{ > + dir=$1 > + $GETFATTR_PROG -n ceph.quota.max_files $dir 2> /dev/null We have a wrapper function around $GETFATTR_PROG called _getfattr(), which is used to deal with different output formats from different versions of getfattr tool, use the helper if possible. And you need to filter $TEST_DIR here as well. And if you don't want the "Removing leading '/' from absolute path names" messages, you could use the "--absolute-names" option of getfattr, e.g. _getfattr -n ceph.quota.max_files --absolute-names $dir | _filter_test_dir Thanks, Eryu > +} > + > +rm -rf $workdir > +mkdir $workdir > + > +# test setting quota > +set_quota 10 $workdir > +get_quota $workdir > + > +# set quota to largest acceptable value (0x7FFFFFFFFFFFFFFF) > +set_quota 9223372036854775807 $workdir > +get_quota $workdir > + > +# test resetting quota > +set_quota 0 $workdir > +get_quota $workdir > + > +# set quota to invalid values (0x8000000000000000 and -1) > +set_quota 9223372036854775808 $workdir > +get_quota $workdir > + > +set_quota -1 $workdir > +get_quota $workdir > + > +set_quota 5 $workdir > +mkdir $workdir/0 > +touch $workdir/0/1 > +touch $workdir/0/2 > +touch $workdir/3 > + > +touch $workdir/4 2>&1 | _filter_test_dir # should fail > +mkdir $workdir/5 2>&1 | _filter_test_dir # should fail > + > +set_quota 0 $workdir > +touch $workdir/4 # shouldn't fail > +mkdir $workdir/5 # shouldn't fail > + > +# success, all done > +status=0 > +exit > diff --git a/tests/ceph/001.out b/tests/ceph/001.out > new file mode 100644 > index 000000000000..6ddb007dce22 > --- /dev/null > +++ b/tests/ceph/001.out > @@ -0,0 +1,9 @@ > +QA output created by 001 > +# file: mnt/test/001 > +ceph.quota.max_files="10" > + > +# file: mnt/test/001 > +ceph.quota.max_files="9223372036854775807" > + > +touch: cannot touch 'TEST_DIR/001/4': Disk quota exceeded > +mkdir: cannot create directory 'TEST_DIR/001/5': Disk quota exceeded > diff --git a/tests/ceph/Makefile b/tests/ceph/Makefile > new file mode 100644 > index 000000000000..f93862af4f31 > --- /dev/null > +++ b/tests/ceph/Makefile > @@ -0,0 +1,20 @@ > +# > +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. > +# > + > +TOPDIR = ../.. > +include $(TOPDIR)/include/builddefs > + > +CEPHFS_DIR = cephfs > +TARGET_DIR = $(PKG_LIB_DIR)/$(TESTS_DIR)/$(CEPHFS_DIR) > + > +include $(BUILDRULES) > + > +install: > + $(INSTALL) -m 755 -d $(TARGET_DIR) > + $(INSTALL) -m 755 $(TESTS) $(TARGET_DIR) > + $(INSTALL) -m 644 group $(TARGET_DIR) > + $(INSTALL) -m 644 $(OUTFILES) $(TARGET_DIR) > + > +# Nothing. > +install-dev install-lib: > diff --git a/tests/ceph/group b/tests/ceph/group > new file mode 100644 > index 000000000000..e389bc6ec7ee > --- /dev/null > +++ b/tests/ceph/group > @@ -0,0 +1 @@ > +001 auto quick quota ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota 2019-04-06 12:45 ` Eryu Guan @ 2019-04-08 9:16 ` Luis Henriques 0 siblings, 0 replies; 5+ messages in thread From: Luis Henriques @ 2019-04-08 9:16 UTC (permalink / raw) To: Eryu Guan; +Cc: fstests, Yan, Zheng, Dave Chinner, ceph-devel Eryu Guan <guaneryu@gmail.com> writes: > On Fri, Apr 05, 2019 at 03:53:04PM +0100, Luis Henriques wrote: >> Simple set of checks for CephFS max_files directory quota implementation. >> >> Signed-off-by: Luis Henriques <lhenriques@suse.com> > > Just some quick/random comments inline, because I don't have a ceph env > to actually test the patches.. > Thanks a lot for your comments, Eryu. They all make sense, I'll send out a new revision of these tests shortly. Cheers, -- Luis >> --- tests/ceph/001 | 86 +++++++++++++++++++++++++++++++++++++++++++++ >> tests/ceph/001.out | 9 +++++ tests/ceph/Makefile | 20 +++++++++++ >> tests/ceph/group | 1 + 4 files changed, 116 insertions(+) create mode >> 100755 tests/ceph/001 create mode 100644 tests/ceph/001.out create >> mode 100644 tests/ceph/Makefile create mode 100644 tests/ceph/group >> >> diff --git a/tests/ceph/001 b/tests/ceph/001 >> new file mode 100755 >> index 000000000000..770e952cd8dc >> --- /dev/null >> +++ b/tests/ceph/001 >> @@ -0,0 +1,86 @@ >> +#! /bin/bash >> +# SPDX-License-Identifier: GPL-2.0 >> +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. >> +# >> +# FS QA Test No. 001 >> +# >> +# Test basic ceph.quota.max_files quota features. >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +workdir=$TEST_DIR/$seq >> + >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + cd / >> + rm -rf $tmp.* >> +} >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/filter >> +. ./common/attr >> + >> +# real QA test starts here >> +_supported_os Linux >> +_supported_fs ceph >> + >> +_require_attrs >> + >> +set_quota() >> +{ >> + val=$1 >> + dir=$2 > > Declare function local variables as 'local'. > >> + $SETFATTR_PROG -n ceph.quota.max_files -v $val $dir >/dev/null 2>&1 > > I think it's better to dump the outputs from $SETFATTR_PROG to > $seqres.full, so we have debug logs when something went wrong. e.g. > > $SETFATTR_PROG -n ceph.quota.max_files -v $val $dir >>$seqres.full 2>&1 > > Also, remove $seqres.full file before test. > >> +} >> +get_quota() >> +{ >> + dir=$1 >> + $GETFATTR_PROG -n ceph.quota.max_files $dir 2> /dev/null > > We have a wrapper function around $GETFATTR_PROG called _getfattr(), > which is used to deal with different output formats from different > versions of getfattr tool, use the helper if possible. > > And you need to filter $TEST_DIR here as well. And if you don't want the > "Removing leading '/' from absolute path names" messages, you could use > the "--absolute-names" option of getfattr, e.g. > > _getfattr -n ceph.quota.max_files --absolute-names $dir | _filter_test_dir > > Thanks, > Eryu > >> +} >> + >> +rm -rf $workdir >> +mkdir $workdir >> + >> +# test setting quota >> +set_quota 10 $workdir >> +get_quota $workdir >> + >> +# set quota to largest acceptable value (0x7FFFFFFFFFFFFFFF) >> +set_quota 9223372036854775807 $workdir >> +get_quota $workdir >> + >> +# test resetting quota >> +set_quota 0 $workdir >> +get_quota $workdir >> + >> +# set quota to invalid values (0x8000000000000000 and -1) >> +set_quota 9223372036854775808 $workdir >> +get_quota $workdir >> + >> +set_quota -1 $workdir >> +get_quota $workdir >> + >> +set_quota 5 $workdir >> +mkdir $workdir/0 >> +touch $workdir/0/1 >> +touch $workdir/0/2 >> +touch $workdir/3 >> + >> +touch $workdir/4 2>&1 | _filter_test_dir # should fail >> +mkdir $workdir/5 2>&1 | _filter_test_dir # should fail >> + >> +set_quota 0 $workdir >> +touch $workdir/4 # shouldn't fail >> +mkdir $workdir/5 # shouldn't fail >> + >> +# success, all done >> +status=0 >> +exit >> diff --git a/tests/ceph/001.out b/tests/ceph/001.out >> new file mode 100644 >> index 000000000000..6ddb007dce22 >> --- /dev/null >> +++ b/tests/ceph/001.out >> @@ -0,0 +1,9 @@ >> +QA output created by 001 >> +# file: mnt/test/001 >> +ceph.quota.max_files="10" >> + >> +# file: mnt/test/001 >> +ceph.quota.max_files="9223372036854775807" >> + >> +touch: cannot touch 'TEST_DIR/001/4': Disk quota exceeded >> +mkdir: cannot create directory 'TEST_DIR/001/5': Disk quota exceeded >> diff --git a/tests/ceph/Makefile b/tests/ceph/Makefile >> new file mode 100644 >> index 000000000000..f93862af4f31 >> --- /dev/null >> +++ b/tests/ceph/Makefile >> @@ -0,0 +1,20 @@ >> +# >> +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. >> +# >> + >> +TOPDIR = ../.. >> +include $(TOPDIR)/include/builddefs >> + >> +CEPHFS_DIR = cephfs >> +TARGET_DIR = $(PKG_LIB_DIR)/$(TESTS_DIR)/$(CEPHFS_DIR) >> + >> +include $(BUILDRULES) >> + >> +install: >> + $(INSTALL) -m 755 -d $(TARGET_DIR) >> + $(INSTALL) -m 755 $(TESTS) $(TARGET_DIR) >> + $(INSTALL) -m 644 group $(TARGET_DIR) >> + $(INSTALL) -m 644 $(OUTFILES) $(TARGET_DIR) >> + >> +# Nothing. >> +install-dev install-lib: >> diff --git a/tests/ceph/group b/tests/ceph/group >> new file mode 100644 >> index 000000000000..e389bc6ec7ee >> --- /dev/null >> +++ b/tests/ceph/group >> @@ -0,0 +1 @@ >> +001 auto quick quota > ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] ceph: test basic ceph.quota.max_bytes quota 2019-04-05 14:53 [PATCH v2 0/2] Initial CephFS tests Luis Henriques 2019-04-05 14:53 ` [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota Luis Henriques @ 2019-04-05 14:53 ` Luis Henriques 1 sibling, 0 replies; 5+ messages in thread From: Luis Henriques @ 2019-04-05 14:53 UTC (permalink / raw) To: fstests; +Cc: Yan, Zheng, Dave Chinner, ceph-devel, Luis Henriques Simple set of checks for CephFS max_bytes directory quota implementation. Signed-off-by: Luis Henriques <lhenriques@suse.com> --- tests/ceph/002 | 125 +++++++++++++++++++++++++++++++++++++++++++++ tests/ceph/002.out | 64 +++++++++++++++++++++++ tests/ceph/group | 1 + 3 files changed, 190 insertions(+) create mode 100755 tests/ceph/002 create mode 100644 tests/ceph/002.out diff --git a/tests/ceph/002 b/tests/ceph/002 new file mode 100755 index 000000000000..6f71ba567bb5 --- /dev/null +++ b/tests/ceph/002 @@ -0,0 +1,125 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 SUSE LLC. All Rights Reserved. +# +# FS QA Test No. 002 +# +# This tests basic ceph.quota.max_bytes quota features. +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +workdir=$TEST_DIR/$seq + +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr + +# real QA test starts here +_supported_os Linux +_supported_fs ceph + +_require_attrs + +set_quota() +{ + val=$1 + dir=$2 + $SETFATTR_PROG -n ceph.quota.max_bytes -v $val $dir >/dev/null 2>&1 +} + +get_quota() +{ + dir=$1 + $GETFATTR_PROG -n ceph.quota.max_bytes $dir 2> /dev/null +} + +# function to write a file. We use a loop because quotas in CephFS is a +# "best-effort" implementation, i.e. a write may actually be allowed even if the +# quota is being exceeded. Using a loop reduces the chances of this to happen: +# the usage of fsync (-W in xfs_io) and the open/close of the file will make +# sure the file size is be updated in the MDSs. +# +# NOTE: 'size' parameter is in M +write_file() +{ + file=$1 + size=$2 # size in M + for (( i = 1; i < $size; i++ )); do + $XFS_IO_PROG -f -c "pwrite -W $((i * 1048576)) 1m" \ + $file | _filter_xfs_io + done +} + +rm -rf $workdir +mkdir $workdir + +# test setting quota +set_quota 1000000 $workdir +get_quota $workdir + +# set quota to largest acceptable value (0x7FFFFFFFFFFFFFFF) +set_quota 9223372036854775807 $workdir +get_quota $workdir + +# test resetting quota +set_quota 0 $workdir +get_quota $workdir + +# set quota to invalid values (0x8000000000000000 and -1) +set_quota 9223372036854775808 $workdir +get_quota $workdir + +set_quota -1 $workdir +get_quota $workdir + +bigfile="$workdir/bigfile" + +# set quota to 10M +set_quota $((10 * 1048576)) $workdir + +# write 9M file +write_file $bigfile 9 +stat -c %s $bigfile +rm $bigfile + +# try to write 11M file +write_file $bigfile 11 # 11M +stat -c %s $bigfile +rm $bigfile + +# write 5 x 2M files +for (( j = 1; j < 6; j++ )); do + smallfile="$workdir/smallfile_$j" + write_file $smallfile 2 # 2M + stat -c %s $smallfile +done + +# try to write another 2M file, should fail +smallfile="$workdir/smallfile_fail" +write_file $smallfile 2 +stat -c %s $smallfile + +# reset quota +set_quota 0 $workdir + +# write 2M file +write_file $smallfile 2 +stat -c %s $smallfile + +# success, all done +status=0 +exit diff --git a/tests/ceph/002.out b/tests/ceph/002.out new file mode 100644 index 000000000000..e9c597cf10a4 --- /dev/null +++ b/tests/ceph/002.out @@ -0,0 +1,64 @@ +QA output created by 002 +# file: mnt/test/002 +ceph.quota.max_bytes="1000000" + +# file: mnt/test/002 +ceph.quota.max_bytes="9223372036854775807" + +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 2097152 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 3145728 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 4194304 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 5242880 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 6291456 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 7340032 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 8388608 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +9437184 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 2097152 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 3145728 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 4194304 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 5242880 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 6291456 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 7340032 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 8388608 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 9437184 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +pwrite: Disk quota exceeded +10485760 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +2097152 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +2097152 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +2097152 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +2097152 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +2097152 +pwrite: Disk quota exceeded +0 +wrote 1048576/1048576 bytes at offset 1048576 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +2097152 diff --git a/tests/ceph/group b/tests/ceph/group index e389bc6ec7ee..02da95169c67 100644 --- a/tests/ceph/group +++ b/tests/ceph/group @@ -1 +1,2 @@ 001 auto quick quota +002 auto quick quota ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-04-08 9:16 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-04-05 14:53 [PATCH v2 0/2] Initial CephFS tests Luis Henriques 2019-04-05 14:53 ` [PATCH v2 1/2] ceph: test basic ceph.quota.max_files quota Luis Henriques 2019-04-06 12:45 ` Eryu Guan 2019-04-08 9:16 ` Luis Henriques 2019-04-05 14:53 ` [PATCH v2 2/2] ceph: test basic ceph.quota.max_bytes quota Luis Henriques
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.