From: "Neil Armstrong" <narmstrong@baylibre.com>
To: u-boot@lists.denx.de
Cc: Neil Armstrong <narmstrong@baylibre.com>,
u-boot-amlogic@groups.io, baylibre-upstreaming@groups.io
Subject: [PATCH] board: amlogic: enable PHY_REALTEK for selected boards
Date: Wed, 10 Apr 2019 16:46:09 +0200 [thread overview]
Message-ID: <20190410144609.1091-1-narmstrong@baylibre.com> (raw)
When using the generic PHY on boards using an RGMII Realtek PHY,
gigabit speed is not always reliable.
This patch enables the Realtek PHY driver for such boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
configs/khadas-vim2_defconfig | 1 +
configs/nanopi-k2_defconfig | 1 +
configs/odroid-c2_defconfig | 1 +
configs/s400_defconfig | 1 +
4 files changed, 4 insertions(+)
diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig
index 080dd19590..f7fb9338e2 100644
--- a/configs/khadas-vim2_defconfig
+++ b/configs/khadas-vim2_defconfig
@@ -31,6 +31,7 @@ CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PHY=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
index 8bbf48f41f..106c5c0193 100644
--- a/configs/nanopi-k2_defconfig
+++ b/configs/nanopi-k2_defconfig
@@ -28,6 +28,7 @@ CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_DM_REGULATOR=y
diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
index 747da184b3..91baddbb60 100644
--- a/configs/odroid-c2_defconfig
+++ b/configs/odroid-c2_defconfig
@@ -29,6 +29,7 @@ CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_DM_REGULATOR=y
diff --git a/configs/s400_defconfig b/configs/s400_defconfig
index 1bd4b7127b..9b8448e003 100644
--- a/configs/s400_defconfig
+++ b/configs/s400_defconfig
@@ -26,6 +26,7 @@ CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_DM_REGULATOR=y
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] board: amlogic: enable PHY_REALTEK for selected boards
Date: Wed, 10 Apr 2019 16:46:09 +0200 [thread overview]
Message-ID: <20190410144609.1091-1-narmstrong@baylibre.com> (raw)
When using the generic PHY on boards using an RGMII Realtek PHY,
gigabit speed is not always reliable.
This patch enables the Realtek PHY driver for such boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
configs/khadas-vim2_defconfig | 1 +
configs/nanopi-k2_defconfig | 1 +
configs/odroid-c2_defconfig | 1 +
configs/s400_defconfig | 1 +
4 files changed, 4 insertions(+)
diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig
index 080dd19590..f7fb9338e2 100644
--- a/configs/khadas-vim2_defconfig
+++ b/configs/khadas-vim2_defconfig
@@ -31,6 +31,7 @@ CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PHY=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
index 8bbf48f41f..106c5c0193 100644
--- a/configs/nanopi-k2_defconfig
+++ b/configs/nanopi-k2_defconfig
@@ -28,6 +28,7 @@ CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_DM_REGULATOR=y
diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
index 747da184b3..91baddbb60 100644
--- a/configs/odroid-c2_defconfig
+++ b/configs/odroid-c2_defconfig
@@ -29,6 +29,7 @@ CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_DM_REGULATOR=y
diff --git a/configs/s400_defconfig b/configs/s400_defconfig
index 1bd4b7127b..9b8448e003 100644
--- a/configs/s400_defconfig
+++ b/configs/s400_defconfig
@@ -26,6 +26,7 @@ CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_DM_REGULATOR=y
--
2.21.0
next reply other threads:[~2019-04-10 14:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-10 14:46 Neil Armstrong [this message]
2019-04-10 14:46 ` [U-Boot] [PATCH] board: amlogic: enable PHY_REALTEK for selected boards Neil Armstrong
2019-04-23 9:29 ` Neil Armstrong
2019-04-23 9:29 ` [U-Boot] " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190410144609.1091-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=baylibre-upstreaming@groups.io \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.