Re: [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module

[Guenter Roeck <linux@roeck-us.net>]

Jean,

On Wed, Apr 10, 2019 at 12:47:26PM +0200, Jean Delvare wrote:
> Instead of duplicating the common code into the 2 (binary) drivers,
> move the common code to a separate module. This is cleaner.
> 
> Signed-off-by: Jean Delvare <jdelvare@suse.de>
> Cc: Eddie James <eajames@linux.ibm.com>
> Cc: Guenter Roeck <linux@roeck-us.net>

what is the parent release for this patch ? I tried to apply it to mainline
and to hwmon-next using git am, but both failed.

Thanks,
Guenter

> ---
> Eddie, can you please give it a try and confirm it works?
> 
> Note: I kept the module names as they were before, hence the extra
> "*-objs :=" statements. They could be removed if we rename the source
> files, but that's better done in git directly. I don't mind either way
> personally.
> 
>  drivers/hwmon/occ/Kconfig  |    3 +--
>  drivers/hwmon/occ/Makefile |    6 ++++--
>  drivers/hwmon/occ/common.c |    7 +++++++
>  drivers/hwmon/occ/sysfs.c  |    2 ++
>  4 files changed, 14 insertions(+), 4 deletions(-)
> 
> --- linux-5.0.orig/drivers/hwmon/occ/Kconfig	2019-04-10 11:30:05.579537638 +0200
> +++ linux-5.0/drivers/hwmon/occ/Kconfig	2019-04-10 11:31:20.843383376 +0200
> @@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE
>  	 called occ-p9-hwmon.
>  
>  config SENSORS_OCC
> -	bool "POWER On-Chip Controller"
> -	depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE
> +	tristate
> --- linux-5.0.orig/drivers/hwmon/occ/Makefile	2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/Makefile	2019-04-10 11:33:23.631765535 +0200
> @@ -1,5 +1,7 @@
> -occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o
> -occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o
> +occ-hwmon-common-objs := common.o sysfs.o
> +occ-p8-hwmon-objs := p8_i2c.o
> +occ-p9-hwmon-objs := p9_sbe.o
>  
> +obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o
>  obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o
>  obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o
> --- linux-5.0.orig/drivers/hwmon/occ/common.c	2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/common.c	2019-04-10 11:44:53.035573580 +0200
> @@ -1,11 +1,13 @@
>  // SPDX-License-Identifier: GPL-2.0
>  
>  #include <linux/device.h>
> +#include <linux/export.h>
>  #include <linux/hwmon.h>
>  #include <linux/hwmon-sysfs.h>
>  #include <linux/jiffies.h>
>  #include <linux/kernel.h>
>  #include <linux/math64.h>
> +#include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/sysfs.h>
>  #include <asm/unaligned.h>
> @@ -1096,3 +1098,8 @@ int occ_setup(struct occ *occ, const cha
>  
>  	return rc;
>  }
> +EXPORT_SYMBOL_GPL(occ_setup);
> +
> +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
> +MODULE_DESCRIPTION("Common OCC hwmon code");
> +MODULE_LICENSE("GPL");
> --- linux-5.0.orig/drivers/hwmon/occ/sysfs.c	2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/sysfs.c	2019-04-10 11:39:38.627003382 +0200
> @@ -12,6 +12,7 @@
>  
>  #include <linux/bitops.h>
>  #include <linux/device.h>
> +#include <linux/export.h>
>  #include <linux/hwmon-sysfs.h>
>  #include <linux/kernel.h>
>  #include <linux/sysfs.h>
> @@ -186,3 +187,4 @@ void occ_shutdown(struct occ *occ)
>  {
>  	sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
>  }
> +EXPORT_SYMBOL_GPL(occ_shutdown);
> 
> 
> -- 
> Jean Delvare
> SUSE L3 Support