Re: [PATCH v3 00/11] i.MX6, DesignWare PCI improvements

[Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>]

On Sun, Mar 31, 2019 at 09:25:36PM -0700, Andrey Smirnov wrote:
> Everyone:
> 
> This is the series containing various small improvements that I made
> while reading the code and researching commit history of pci-imx6.c
> and pcie-designware*.c files. All changes are optional, so commits
> that don't seem like an improvement can be easily dropped. Hopefully
> each patch is self-explanatory.
> 
> I tested this series on i.MX6Q, i.MX7D and i.MX8MQ.
> 
> Feedback is welcome!
> 
> Thanks,
> Andrey Smirnov
> 
> Changes since [v2]:
> 
>     - All non i.MX6 patches dropped, since they were accepted as a
>       seprarte series
>       
>     - Series rebased on lates 'dwc-pci' branch of PCI tree
>     
>     - Patches "PCI: imx6: Use flags to indicate support for suspend"
>       and "PCI: imx6: Replace calls to udelay() with usleep_range()"
>       added to the series
> 
> Changes since [v1]:
> 
>   - Dropped "PCI: imx6: Drop imx6_pcie_link_up()" due to the matter
>     already having been addressed by "PCI: imx6: Fix link training
>     status detection in link up check" from Trent Piepho
> 
>   - Changed "designware" -> "dwc" for all subject lines
> 
>   - Collected Acked-by's from Gustavo Pimentel
> 
> [v2] lkml.kernel.org/r/20190104174925.17153-1-andrew.smirnov@gmail.com
> [v1] lkml.kernel.org/r/20181221072716.29017-1-andrew.smirnov@gmail.com
> 
> Andrey Smirnov (11):
>   PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock()
>   PCI: imx6: Remove redundant debug tracing
>   PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change()
>   PCI: imx6: Remove PCIE_PL_PFLR_* constants
>   PCI: dwc: imx6: Share PHY debug register definitions
>   PCI: imx6: Make use of BIT() in constant definitions
>   PCI: imx6: Simplify bit operations in PHY functions
>   PCI: imx6: Simplify pcie_phy_poll_ack()
>   PCI: imx6: Restrict PHY register data to 16-bit
>   PCI: imx6: Use flags to indicate support for suspend
>   PCI: imx6: Replace calls to udelay() with usleep_range()
> 
>  drivers/pci/controller/dwc/pci-imx6.c        | 119 ++++++++-----------
>  drivers/pci/controller/dwc/pcie-designware.c |  12 +-
>  drivers/pci/controller/dwc/pcie-designware.h |   3 +
>  3 files changed, 54 insertions(+), 80 deletions(-)

I am waiting for Lucas's review/ACKs to proceed with this
series.

Thanks,
Lorenzo