[PATCH 1/3] dt-bindings: net: add PHY reset controller binding

[PATCH 1/3] dt-bindings: net: add PHY reset controller binding

[David Bauer]

Add the documentation for PHY reset lines controlled by a reset controller.

Signed-off-by: David Bauer <mail@david-bauer.net>
---
 Documentation/devicetree/bindings/net/phy.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 17c1d2bd00f6..9b9e5b1765dd 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -51,6 +51,10 @@ Optional Properties:
   to ensure the integrated PHY is used. The absence of this property indicates
   the muxers should be configured so that the external PHY is used.
 
+- resets: The reset-controller phandle and specifier for the PHY reset signal.
+
+- reset-names: Must be "phy" for the PHY reset signal.
+
 - reset-gpios: The GPIO phandle and specifier for the PHY reset signal.
 
 - reset-assert-us: Delay after the reset was asserted in microseconds.
@@ -67,6 +71,8 @@ ethernet-phy@0 {
 	interrupts = <35 IRQ_TYPE_EDGE_RISING>;
 	reg = <0>;
 
+	resets = <&rst 8>;
+	reset-names = "phy";
 	reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	reset-assert-us = <1000>;
 	reset-deassert-us = <2000>;
-- 
2.21.0

[PATCH 2/3] net: phy: add support for reset-controller

[David Bauer]

This commit adds support for PHY reset pins handled by a reset controller.

Signed-off-by: David Bauer <mail@david-bauer.net>
---
 drivers/net/phy/mdio_bus.c    | 25 +++++++++++++++++++++++++
 drivers/net/phy/mdio_device.c | 13 +++++++++++--
 include/linux/mdio.h          |  1 +
 3 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 4be4cc09eb90..7590645f19ef 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -24,6 +24,7 @@
 #include <linux/of_gpio.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/reset.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
@@ -63,6 +64,27 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 	return 0;
 }
 
+static int mdiobus_register_reset(struct mdio_device *mdiodev)
+{
+	struct reset_control *reset = NULL;
+
+	if (mdiodev->dev.of_node)
+		reset = devm_reset_control_get_exclusive(&mdiodev->dev,
+							 "phy");
+	if (PTR_ERR(reset) == -ENOENT ||
+	    PTR_ERR(reset) == -ENOTSUPP)
+		reset = NULL;
+	else if (IS_ERR(reset))
+		return PTR_ERR(reset);
+
+	mdiodev->reset_ctrl = reset;
+
+	/* Assert the reset signal */
+	mdio_device_reset(mdiodev, 1);
+
+	return 0;
+}
+
 int mdiobus_register_device(struct mdio_device *mdiodev)
 {
 	int err;
@@ -74,6 +96,9 @@ int mdiobus_register_device(struct mdio_device *mdiodev)
 		err = mdiobus_register_gpiod(mdiodev);
 		if (err)
 			return err;
+		err = mdiobus_register_reset(mdiodev);
+		if (err)
+			return err;
 	}
 
 	mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev;
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index 887076292e50..57668e0f9256 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -16,6 +16,7 @@
 #include <linux/mii.h>
 #include <linux/module.h>
 #include <linux/phy.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/unistd.h>
@@ -116,10 +117,18 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
 {
 	unsigned int d;
 
-	if (!mdiodev->reset)
+	if (!mdiodev->reset && !mdiodev->reset_ctrl)
 		return;
 
-	gpiod_set_value(mdiodev->reset, value);
+	if (mdiodev->reset)
+		gpiod_set_value(mdiodev->reset, value);
+
+	if (mdiodev->reset_ctrl) {
+		if (value)
+			reset_control_assert(mdiodev->reset_ctrl);
+		else
+			reset_control_deassert(mdiodev->reset_ctrl);
+	}
 
 	d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay;
 	if (d)
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 3e99ae3ed87f..6eaf71500ef6 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -40,6 +40,7 @@ struct mdio_device {
 	int addr;
 	int flags;
 	struct gpio_desc *reset;
+	struct reset_control *reset_ctrl;
 	unsigned int reset_assert_delay;
 	unsigned int reset_deassert_delay;
 };
-- 
2.21.0

Re: [PATCH 2/3] net: phy: add support for reset-controller

[Andrew Lunn]

On Mon, Apr 15, 2019 at 02:38:39PM +0200, David Bauer wrote:
> +static int mdiobus_register_reset(struct mdio_device *mdiodev)
> +{
> +	struct reset_control *reset = NULL;
> +
> +	if (mdiodev->dev.of_node)
> +		reset = devm_reset_control_get_exclusive(&mdiodev->dev,
> +							 "phy");
> +	if (PTR_ERR(reset) == -ENOENT ||
> +	    PTR_ERR(reset) == -ENOTSUPP)
> +		reset = NULL;
> +	else if (IS_ERR(reset))
> +		return PTR_ERR(reset);
> +
> +	mdiodev->reset_ctrl = reset;
> +
> +	/* Assert the reset signal */
> +	mdio_device_reset(mdiodev, 1);

Hi David

The mdiobus_register_gpiod() function also has a call to
mdio_device_reset(). So we end up resetting the GPIO twice.

It is probably better to pull this out of here, and
mdiobus_register_gpiod(), and do it once in mdiobus_register_device().

	  Andrew

[PATCH 3/3] net: mdio: rename mdio_device reset to reset_gpio

[David Bauer]

This renames the GPIO reset of mdio devices from 'reset' to
'reset_gpio' to better differentiate between GPIO and
reset-controller driven reset line.

Signed-off-by: David Bauer <mail@david-bauer.net>
---
 drivers/net/phy/mdio_bus.c    | 6 +++---
 drivers/net/phy/mdio_device.c | 6 +++---
 include/linux/mdio.h          | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7590645f19ef..d1087bd24c83 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -56,7 +56,7 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 			return PTR_ERR(gpiod);
 	}
 
-	mdiodev->reset = gpiod;
+	mdiodev->reset_gpio = gpiod;
 
 	/* Assert the reset signal again */
 	mdio_device_reset(mdiodev, 1);
@@ -471,8 +471,8 @@ void mdiobus_unregister(struct mii_bus *bus)
 		if (!mdiodev)
 			continue;
 
-		if (mdiodev->reset)
-			gpiod_put(mdiodev->reset);
+		if (mdiodev->reset_gpio)
+			gpiod_put(mdiodev->reset_gpio);
 
 		mdiodev->device_remove(mdiodev);
 		mdiodev->device_free(mdiodev);
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index 57668e0f9256..e282600bd83e 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -117,11 +117,11 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
 {
 	unsigned int d;
 
-	if (!mdiodev->reset && !mdiodev->reset_ctrl)
+	if (!mdiodev->reset_gpio && !mdiodev->reset_ctrl)
 		return;
 
-	if (mdiodev->reset)
-		gpiod_set_value(mdiodev->reset, value);
+	if (mdiodev->reset_gpio)
+		gpiod_set_value(mdiodev->reset_gpio, value);
 
 	if (mdiodev->reset_ctrl) {
 		if (value)
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6eaf71500ef6..9dc16d5705a1 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -39,7 +39,7 @@ struct mdio_device {
 	/* Bus address of the MDIO device (0-31) */
 	int addr;
 	int flags;
-	struct gpio_desc *reset;
+	struct gpio_desc *reset_gpio;
 	struct reset_control *reset_ctrl;
 	unsigned int reset_assert_delay;
 	unsigned int reset_deassert_delay;
-- 
2.21.0

Re: [PATCH 3/3] net: mdio: rename mdio_device reset to reset_gpio

[Andrew Lunn]

On Mon, Apr 15, 2019 at 02:38:40PM +0200, David Bauer wrote:
> This renames the GPIO reset of mdio devices from 'reset' to
> 'reset_gpio' to better differentiate between GPIO and
> reset-controller driven reset line.
> 
> Signed-off-by: David Bauer <mail@david-bauer.net>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH 3/3] net: mdio: rename mdio_device reset to reset_gpio

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 3591 bytes --]

Hi David,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on net/master]
[also build test ERROR on v5.1-rc5 next-20190415]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/David-Bauer/dt-bindings-net-add-PHY-reset-controller-binding/20190416-061343
config: i386-randconfig-x010-201915 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/net/phy/at803x.c: In function 'at803x_link_change_notify':
>> drivers/net/phy/at803x.c:337:19: error: 'struct mdio_device' has no member named 'reset'
      if (phydev->mdio.reset && !priv->phy_reset) {
                      ^

vim +337 drivers/net/phy/at803x.c

77a99394 Zhao Qiang      2014-03-28  324  
13a56b44 Daniel Mack     2014-06-18  325  static void at803x_link_change_notify(struct phy_device *phydev)
13a56b44 Daniel Mack     2014-06-18  326  {
13a56b44 Daniel Mack     2014-06-18  327  	struct at803x_priv *priv = phydev->priv;
13a56b44 Daniel Mack     2014-06-18  328  
13a56b44 Daniel Mack     2014-06-18  329  	/*
13a56b44 Daniel Mack     2014-06-18  330  	 * Conduct a hardware reset for AT8030 every time a link loss is
13a56b44 Daniel Mack     2014-06-18  331  	 * signalled. This is necessary to circumvent a hardware bug that
13a56b44 Daniel Mack     2014-06-18  332  	 * occurs when the cable is unplugged while TX packets are pending
13a56b44 Daniel Mack     2014-06-18  333  	 * in the FIFO. In such cases, the FIFO enters an error mode it
13a56b44 Daniel Mack     2014-06-18  334  	 * cannot recover from by software.
13a56b44 Daniel Mack     2014-06-18  335  	 */
13a56b44 Daniel Mack     2014-06-18  336  	if (phydev->state == PHY_NOLINK) {
bafbdd52 Sergei Shtylyov 2017-12-04 @337  		if (phydev->mdio.reset && !priv->phy_reset) {
13a56b44 Daniel Mack     2014-06-18  338  			struct at803x_context context;
13a56b44 Daniel Mack     2014-06-18  339  
13a56b44 Daniel Mack     2014-06-18  340  			at803x_context_save(phydev, &context);
13a56b44 Daniel Mack     2014-06-18  341  
bafbdd52 Sergei Shtylyov 2017-12-04  342  			phy_device_reset(phydev, 1);
13a56b44 Daniel Mack     2014-06-18  343  			msleep(1);
bafbdd52 Sergei Shtylyov 2017-12-04  344  			phy_device_reset(phydev, 0);
d57019d1 Sergei Shtylyov 2016-03-23  345  			msleep(1);
13a56b44 Daniel Mack     2014-06-18  346  
13a56b44 Daniel Mack     2014-06-18  347  			at803x_context_restore(phydev, &context);
13a56b44 Daniel Mack     2014-06-18  348  
72ba48be Andrew Lunn     2016-01-06  349  			phydev_dbg(phydev, "%s(): phy was reset\n",
13a56b44 Daniel Mack     2014-06-18  350  				   __func__);
13a56b44 Daniel Mack     2014-06-18  351  			priv->phy_reset = true;
13a56b44 Daniel Mack     2014-06-18  352  		}
13a56b44 Daniel Mack     2014-06-18  353  	} else {
13a56b44 Daniel Mack     2014-06-18  354  		priv->phy_reset = false;
13a56b44 Daniel Mack     2014-06-18  355  	}
13a56b44 Daniel Mack     2014-06-18  356  }
13a56b44 Daniel Mack     2014-06-18  357  

:::::: The code at line 337 was first introduced by commit
:::::: bafbdd527d569c8200521f2f7579f65a044271be phylib: Add device reset GPIO support

:::::: TO: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
:::::: CC: David S. Miller <davem@davemloft.net>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 27237 bytes --]

Re: [PATCH 3/3] net: mdio: rename mdio_device reset to reset_gpio

[kbuild test robot]

Hi David,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on net/master]
[also build test WARNING on v5.1-rc5 next-20190415]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/David-Bauer/dt-bindings-net-add-PHY-reset-controller-binding/20190416-061343
reproduce:
        # apt-get install sparse
        make ARCH=x86_64 allmodconfig
        make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'


sparse warnings: (new ones prefixed by >>)

   drivers/net/phy/at803x.c:337:33: sparse: no member 'reset' in struct mdio_device
>> drivers/net/phy/at803x.c:337:33: sparse: unknown expression (8 46)

vim +337 drivers/net/phy/at803x.c

77a993942 Zhao Qiang      2014-03-28  324  
13a56b449 Daniel Mack     2014-06-18  325  static void at803x_link_change_notify(struct phy_device *phydev)
13a56b449 Daniel Mack     2014-06-18  326  {
13a56b449 Daniel Mack     2014-06-18  327  	struct at803x_priv *priv = phydev->priv;
13a56b449 Daniel Mack     2014-06-18  328  
13a56b449 Daniel Mack     2014-06-18  329  	/*
13a56b449 Daniel Mack     2014-06-18  330  	 * Conduct a hardware reset for AT8030 every time a link loss is
13a56b449 Daniel Mack     2014-06-18  331  	 * signalled. This is necessary to circumvent a hardware bug that
13a56b449 Daniel Mack     2014-06-18  332  	 * occurs when the cable is unplugged while TX packets are pending
13a56b449 Daniel Mack     2014-06-18  333  	 * in the FIFO. In such cases, the FIFO enters an error mode it
13a56b449 Daniel Mack     2014-06-18  334  	 * cannot recover from by software.
13a56b449 Daniel Mack     2014-06-18  335  	 */
13a56b449 Daniel Mack     2014-06-18  336  	if (phydev->state == PHY_NOLINK) {
bafbdd527 Sergei Shtylyov 2017-12-04 @337  		if (phydev->mdio.reset && !priv->phy_reset) {
13a56b449 Daniel Mack     2014-06-18  338  			struct at803x_context context;
13a56b449 Daniel Mack     2014-06-18  339  
13a56b449 Daniel Mack     2014-06-18  340  			at803x_context_save(phydev, &context);
13a56b449 Daniel Mack     2014-06-18  341  
bafbdd527 Sergei Shtylyov 2017-12-04  342  			phy_device_reset(phydev, 1);
13a56b449 Daniel Mack     2014-06-18  343  			msleep(1);
bafbdd527 Sergei Shtylyov 2017-12-04  344  			phy_device_reset(phydev, 0);
d57019d18 Sergei Shtylyov 2016-03-23  345  			msleep(1);
13a56b449 Daniel Mack     2014-06-18  346  
13a56b449 Daniel Mack     2014-06-18  347  			at803x_context_restore(phydev, &context);
13a56b449 Daniel Mack     2014-06-18  348  
72ba48be3 Andrew Lunn     2016-01-06  349  			phydev_dbg(phydev, "%s(): phy was reset\n",
13a56b449 Daniel Mack     2014-06-18  350  				   __func__);
13a56b449 Daniel Mack     2014-06-18  351  			priv->phy_reset = true;
13a56b449 Daniel Mack     2014-06-18  352  		}
13a56b449 Daniel Mack     2014-06-18  353  	} else {
13a56b449 Daniel Mack     2014-06-18  354  		priv->phy_reset = false;
13a56b449 Daniel Mack     2014-06-18  355  	}
13a56b449 Daniel Mack     2014-06-18  356  }
13a56b449 Daniel Mack     2014-06-18  357  

:::::: The code at line 337 was first introduced by commit
:::::: bafbdd527d569c8200521f2f7579f65a044271be phylib: Add device reset GPIO support

:::::: TO: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
:::::: CC: David S. Miller <davem@davemloft.net>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH 3/3] net: mdio: rename mdio_device reset to reset_gpio

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 4957 bytes --]

Hi David,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on net/master]
[also build test WARNING on v5.1-rc5 next-20190415]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/David-Bauer/dt-bindings-net-add-PHY-reset-controller-binding/20190416-061343
config: i386-randconfig-x006-201915 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All warnings (new ones prefixed by >>):

   In file included from include/linux/phy.h:19:0,
                    from drivers/net/phy/at803x.c:10:
   drivers/net/phy/at803x.c: In function 'at803x_link_change_notify':
   drivers/net/phy/at803x.c:337:19: error: 'struct mdio_device' has no member named 'reset'
      if (phydev->mdio.reset && !priv->phy_reset) {
                      ^
   include/linux/compiler.h:58:30: note: in definition of macro '__trace_if'
     if (__builtin_constant_p(!!(cond)) ? !!(cond) :   \
                                 ^~~~
>> drivers/net/phy/at803x.c:337:3: note: in expansion of macro 'if'
      if (phydev->mdio.reset && !priv->phy_reset) {
      ^~
   drivers/net/phy/at803x.c:337:19: error: 'struct mdio_device' has no member named 'reset'
      if (phydev->mdio.reset && !priv->phy_reset) {
                      ^
   include/linux/compiler.h:58:42: note: in definition of macro '__trace_if'
     if (__builtin_constant_p(!!(cond)) ? !!(cond) :   \
                                             ^~~~
>> drivers/net/phy/at803x.c:337:3: note: in expansion of macro 'if'
      if (phydev->mdio.reset && !priv->phy_reset) {
      ^~
   drivers/net/phy/at803x.c:337:19: error: 'struct mdio_device' has no member named 'reset'
      if (phydev->mdio.reset && !priv->phy_reset) {
                      ^
   include/linux/compiler.h:69:16: note: in definition of macro '__trace_if'
      ______r = !!(cond);     \
                   ^~~~
>> drivers/net/phy/at803x.c:337:3: note: in expansion of macro 'if'
      if (phydev->mdio.reset && !priv->phy_reset) {
      ^~

vim +/if +337 drivers/net/phy/at803x.c

77a993942 Zhao Qiang      2014-03-28  324  
13a56b449 Daniel Mack     2014-06-18  325  static void at803x_link_change_notify(struct phy_device *phydev)
13a56b449 Daniel Mack     2014-06-18  326  {
13a56b449 Daniel Mack     2014-06-18  327  	struct at803x_priv *priv = phydev->priv;
13a56b449 Daniel Mack     2014-06-18  328  
13a56b449 Daniel Mack     2014-06-18  329  	/*
13a56b449 Daniel Mack     2014-06-18  330  	 * Conduct a hardware reset for AT8030 every time a link loss is
13a56b449 Daniel Mack     2014-06-18  331  	 * signalled. This is necessary to circumvent a hardware bug that
13a56b449 Daniel Mack     2014-06-18  332  	 * occurs when the cable is unplugged while TX packets are pending
13a56b449 Daniel Mack     2014-06-18  333  	 * in the FIFO. In such cases, the FIFO enters an error mode it
13a56b449 Daniel Mack     2014-06-18  334  	 * cannot recover from by software.
13a56b449 Daniel Mack     2014-06-18  335  	 */
13a56b449 Daniel Mack     2014-06-18  336  	if (phydev->state == PHY_NOLINK) {
bafbdd527 Sergei Shtylyov 2017-12-04 @337  		if (phydev->mdio.reset && !priv->phy_reset) {
13a56b449 Daniel Mack     2014-06-18  338  			struct at803x_context context;
13a56b449 Daniel Mack     2014-06-18  339  
13a56b449 Daniel Mack     2014-06-18  340  			at803x_context_save(phydev, &context);
13a56b449 Daniel Mack     2014-06-18  341  
bafbdd527 Sergei Shtylyov 2017-12-04  342  			phy_device_reset(phydev, 1);
13a56b449 Daniel Mack     2014-06-18  343  			msleep(1);
bafbdd527 Sergei Shtylyov 2017-12-04  344  			phy_device_reset(phydev, 0);
d57019d18 Sergei Shtylyov 2016-03-23  345  			msleep(1);
13a56b449 Daniel Mack     2014-06-18  346  
13a56b449 Daniel Mack     2014-06-18  347  			at803x_context_restore(phydev, &context);
13a56b449 Daniel Mack     2014-06-18  348  
72ba48be3 Andrew Lunn     2016-01-06  349  			phydev_dbg(phydev, "%s(): phy was reset\n",
13a56b449 Daniel Mack     2014-06-18  350  				   __func__);
13a56b449 Daniel Mack     2014-06-18  351  			priv->phy_reset = true;
13a56b449 Daniel Mack     2014-06-18  352  		}
13a56b449 Daniel Mack     2014-06-18  353  	} else {
13a56b449 Daniel Mack     2014-06-18  354  		priv->phy_reset = false;
13a56b449 Daniel Mack     2014-06-18  355  	}
13a56b449 Daniel Mack     2014-06-18  356  }
13a56b449 Daniel Mack     2014-06-18  357  

:::::: The code at line 337 was first introduced by commit
:::::: bafbdd527d569c8200521f2f7579f65a044271be phylib: Add device reset GPIO support

:::::: TO: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
:::::: CC: David S. Miller <davem@davemloft.net>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 34277 bytes --]

Re: [PATCH 1/3] dt-bindings: net: add PHY reset controller binding

[Andrew Lunn]

On Mon, Apr 15, 2019 at 02:38:38PM +0200, David Bauer wrote:
> Add the documentation for PHY reset lines controlled by a reset controller.

Hi David

When you respin, please add a patch 0/3 containing a cover note.
 
> Signed-off-by: David Bauer <mail@david-bauer.net>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew