[2/2] USB: serial: digi_acceleport: clean up set_termios

[Johan Hovold <johan@kernel.org>]

Clean up set_termios() by adding missing white space around operators
and making a couple of continuation lines more readable.

Also drop a couple of redundant braces.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/digi_acceleport.c | 33 ++++++++++++++--------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 4699e114f617..578ebdd86520 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -740,9 +740,9 @@ static void digi_set_termios(struct tty_struct *tty,
 	/* set parity */
 	tty->termios.c_cflag &= ~CMSPAR;
 
-	if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
-		if (cflag&PARENB) {
-			if (cflag&PARODD)
+	if ((cflag & (PARENB | PARODD)) != (old_cflag & (PARENB | PARODD))) {
+		if (cflag & PARENB) {
+			if (cflag & PARODD)
 				arg = DIGI_PARITY_ODD;
 			else
 				arg = DIGI_PARITY_EVEN;
@@ -755,9 +755,9 @@ static void digi_set_termios(struct tty_struct *tty,
 		buf[i++] = 0;
 	}
 	/* set word size */
-	if ((cflag&CSIZE) != (old_cflag&CSIZE)) {
+	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
 		arg = -1;
-		switch (cflag&CSIZE) {
+		switch (cflag & CSIZE) {
 		case CS5: arg = DIGI_WORD_SIZE_5; break;
 		case CS6: arg = DIGI_WORD_SIZE_6; break;
 		case CS7: arg = DIGI_WORD_SIZE_7; break;
@@ -765,7 +765,7 @@ static void digi_set_termios(struct tty_struct *tty,
 		default:
 			dev_dbg(dev,
 				"digi_set_termios: can't handle word size %d\n",
-				(cflag&CSIZE));
+				cflag & CSIZE);
 			break;
 		}
 
@@ -779,9 +779,9 @@ static void digi_set_termios(struct tty_struct *tty,
 	}
 
 	/* set stop bits */
-	if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) {
+	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
 
-		if ((cflag&CSTOPB))
+		if ((cflag & CSTOPB))
 			arg = DIGI_STOP_BITS_2;
 		else
 			arg = DIGI_STOP_BITS_1;
@@ -794,15 +794,15 @@ static void digi_set_termios(struct tty_struct *tty,
 	}
 
 	/* set input flow control */
-	if ((iflag&IXOFF) != (old_iflag&IXOFF)
-	    || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
+	if ((iflag & IXOFF) != (old_iflag & IXOFF) ||
+			(cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 		arg = 0;
-		if (iflag&IXOFF)
+		if (iflag & IXOFF)
 			arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
 		else
 			arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
 
-		if (cflag&CRTSCTS) {
+		if (cflag & CRTSCTS) {
 			arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
 
 			/* On USB-4 it is necessary to assert RTS prior */
@@ -822,19 +822,18 @@ static void digi_set_termios(struct tty_struct *tty,
 	}
 
 	/* set output flow control */
-	if ((iflag & IXON) != (old_iflag & IXON)
-	    || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+	if ((iflag & IXON) != (old_iflag & IXON) ||
+			(cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 		arg = 0;
 		if (iflag & IXON)
 			arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
 		else
 			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
 
-		if (cflag & CRTSCTS) {
+		if (cflag & CRTSCTS)
 			arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
-		} else {
+		else
 			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
-		}
 
 		buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
 		buf[i++] = priv->dp_port_num;