[PATCH 0/4] meson-nand: small code improvements

[PATCH 0/4] meson-nand: small code improvements

[Martin Blumenstingl]

This series comes with four small improvements for the meson-nand
driver:
* the first patches are replacing open-coded logic with existing
  utilities / helpers
* the third patch drops some unnecessary casting after changing
  the type of the info buffer parameter from "u8 *" to "void *"
* the fourth patch adjusts the usage of init_completion with what the
  documentation suggests

I have tested these patches as best as I could on my Meson8m2 board
using experimental patches on top of this series which add support for
this older SoC to the meson-nand driver.

Liang, can you please test this series on GXL and/or AXG so I don't
break the NFC driver on these newer SoCs? All of my GXL/GXM boards
have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
myself.

This series is meant to be applied to the nand/next tree.


Martin Blumenstingl (4):
  mtd: rawnand: meson: use struct_size macro
  mtd: rawnand: meson: use of_property_count_elems_of_size helper
  mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
  mtd: rawnand: meson: only initialize the RB completion once

 drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 0/4] meson-nand: small code improvements

[Martin Blumenstingl]

This series comes with four small improvements for the meson-nand
driver:
* the first patches are replacing open-coded logic with existing
  utilities / helpers
* the third patch drops some unnecessary casting after changing
  the type of the info buffer parameter from "u8 *" to "void *"
* the fourth patch adjusts the usage of init_completion with what the
  documentation suggests

I have tested these patches as best as I could on my Meson8m2 board
using experimental patches on top of this series which add support for
this older SoC to the meson-nand driver.

Liang, can you please test this series on GXL and/or AXG so I don't
break the NFC driver on these newer SoCs? All of my GXL/GXM boards
have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
myself.

This series is meant to be applied to the nand/next tree.


Martin Blumenstingl (4):
  mtd: rawnand: meson: use struct_size macro
  mtd: rawnand: meson: use of_property_count_elems_of_size helper
  mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
  mtd: rawnand: meson: only initialize the RB completion once

 drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

-- 
2.21.0

[PATCH 0/4] meson-nand: small code improvements

[Martin Blumenstingl]

This series comes with four small improvements for the meson-nand
driver:
* the first patches are replacing open-coded logic with existing
  utilities / helpers
* the third patch drops some unnecessary casting after changing
  the type of the info buffer parameter from "u8 *" to "void *"
* the fourth patch adjusts the usage of init_completion with what the
  documentation suggests

I have tested these patches as best as I could on my Meson8m2 board
using experimental patches on top of this series which add support for
this older SoC to the meson-nand driver.

Liang, can you please test this series on GXL and/or AXG so I don't
break the NFC driver on these newer SoCs? All of my GXL/GXM boards
have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
myself.

This series is meant to be applied to the nand/next tree.


Martin Blumenstingl (4):
  mtd: rawnand: meson: use struct_size macro
  mtd: rawnand: meson: use of_property_count_elems_of_size helper
  mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
  mtd: rawnand: meson: only initialize the RB completion once

 drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 0/4] meson-nand: small code improvements

[Martin Blumenstingl]

This series comes with four small improvements for the meson-nand
driver:
* the first patches are replacing open-coded logic with existing
  utilities / helpers
* the third patch drops some unnecessary casting after changing
  the type of the info buffer parameter from "u8 *" to "void *"
* the fourth patch adjusts the usage of init_completion with what the
  documentation suggests

I have tested these patches as best as I could on my Meson8m2 board
using experimental patches on top of this series which add support for
this older SoC to the meson-nand driver.

Liang, can you please test this series on GXL and/or AXG so I don't
break the NFC driver on these newer SoCs? All of my GXL/GXM boards
have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
myself.

This series is meant to be applied to the nand/next tree.


Martin Blumenstingl (4):
  mtd: rawnand: meson: use struct_size macro
  mtd: rawnand: meson: use of_property_count_elems_of_size helper
  mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
  mtd: rawnand: meson: only initialize the RB completion once

 drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

-- 
2.21.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Martin Blumenstingl]

Use the recently introduced struct_size macro instead of open-coding
it's logic.
No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index cb0b03e36a35..c1a6af57dab5 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 		return -EINVAL;
 	}
 
-	meson_chip = devm_kzalloc(dev,
-				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
+	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
 				  GFP_KERNEL);
 	if (!meson_chip)
 		return -ENOMEM;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Martin Blumenstingl]

Use the recently introduced struct_size macro instead of open-coding
it's logic.
No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index cb0b03e36a35..c1a6af57dab5 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 		return -EINVAL;
 	}
 
-	meson_chip = devm_kzalloc(dev,
-				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
+	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
 				  GFP_KERNEL);
 	if (!meson_chip)
 		return -ENOMEM;
-- 
2.21.0

[PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Martin Blumenstingl]

Use the recently introduced struct_size macro instead of open-coding
it's logic.
No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index cb0b03e36a35..c1a6af57dab5 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 		return -EINVAL;
 	}
 
-	meson_chip = devm_kzalloc(dev,
-				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
+	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
 				  GFP_KERNEL);
 	if (!meson_chip)
 		return -ENOMEM;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Martin Blumenstingl]

Use the recently introduced struct_size macro instead of open-coding
it's logic.
No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index cb0b03e36a35..c1a6af57dab5 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 		return -EINVAL;
 	}
 
-	meson_chip = devm_kzalloc(dev,
-				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
+	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
 				  GFP_KERNEL);
 	if (!meson_chip)
 		return -ENOMEM;
-- 
2.21.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Liang Yang]

Hello Martin and Miquel,

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the recently introduced struct_size macro instead of open-coding
> it's logic.
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index cb0b03e36a35..c1a6af57dab5 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   		return -EINVAL;
>   	}
>   
> -	meson_chip = devm_kzalloc(dev,
> -				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
> +	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
>   				  GFP_KERNEL);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!meson_chip)
>   		return -ENOMEM;
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Liang Yang]

Hello Martin and Miquel,

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the recently introduced struct_size macro instead of open-coding
> it's logic.
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index cb0b03e36a35..c1a6af57dab5 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   		return -EINVAL;
>   	}
>   
> -	meson_chip = devm_kzalloc(dev,
> -				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
> +	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
>   				  GFP_KERNEL);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!meson_chip)
>   		return -ENOMEM;
> 

Re: [PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Liang Yang]

Hello Martin and Miquel,

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the recently introduced struct_size macro instead of open-coding
> it's logic.
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index cb0b03e36a35..c1a6af57dab5 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   		return -EINVAL;
>   	}
>   
> -	meson_chip = devm_kzalloc(dev,
> -				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
> +	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
>   				  GFP_KERNEL);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!meson_chip)
>   		return -ENOMEM;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/4] mtd: rawnand: meson: use struct_size macro

[Liang Yang]

Hello Martin and Miquel,

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the recently introduced struct_size macro instead of open-coding
> it's logic.
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index cb0b03e36a35..c1a6af57dab5 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1242,8 +1242,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   		return -EINVAL;
>   	}
>   
> -	meson_chip = devm_kzalloc(dev,
> -				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
> +	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
>   				  GFP_KERNEL);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!meson_chip)
>   		return -ENOMEM;
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Martin Blumenstingl]

Use the of_property_count_elems_of_size() helper instead of open-coding
it's logic. As a bonus this will now error out if the "reg" property
values use an incorrect size (anything other than sizeof(u32)).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index c1a6af57dab5..9a6023638101 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 	int ret, i;
 	u32 tmp, nsels;
 
-	if (!of_get_property(np, "reg", &nsels))
-		return -EINVAL;
-
-	nsels /= sizeof(u32);
+	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
 	if (!nsels || nsels > MAX_CE_NUM) {
 		dev_err(dev, "invalid register property size\n");
 		return -EINVAL;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Martin Blumenstingl]

Use the of_property_count_elems_of_size() helper instead of open-coding
it's logic. As a bonus this will now error out if the "reg" property
values use an incorrect size (anything other than sizeof(u32)).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index c1a6af57dab5..9a6023638101 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 	int ret, i;
 	u32 tmp, nsels;
 
-	if (!of_get_property(np, "reg", &nsels))
-		return -EINVAL;
-
-	nsels /= sizeof(u32);
+	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
 	if (!nsels || nsels > MAX_CE_NUM) {
 		dev_err(dev, "invalid register property size\n");
 		return -EINVAL;
-- 
2.21.0

[PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Martin Blumenstingl]

Use the of_property_count_elems_of_size() helper instead of open-coding
it's logic. As a bonus this will now error out if the "reg" property
values use an incorrect size (anything other than sizeof(u32)).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index c1a6af57dab5..9a6023638101 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 	int ret, i;
 	u32 tmp, nsels;
 
-	if (!of_get_property(np, "reg", &nsels))
-		return -EINVAL;
-
-	nsels /= sizeof(u32);
+	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
 	if (!nsels || nsels > MAX_CE_NUM) {
 		dev_err(dev, "invalid register property size\n");
 		return -EINVAL;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Martin Blumenstingl]

Use the of_property_count_elems_of_size() helper instead of open-coding
it's logic. As a bonus this will now error out if the "reg" property
values use an incorrect size (anything other than sizeof(u32)).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index c1a6af57dab5..9a6023638101 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
 	int ret, i;
 	u32 tmp, nsels;
 
-	if (!of_get_property(np, "reg", &nsels))
-		return -EINVAL;
-
-	nsels /= sizeof(u32);
+	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
 	if (!nsels || nsels > MAX_CE_NUM) {
 		dev_err(dev, "invalid register property size\n");
 		return -EINVAL;
-- 
2.21.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the of_property_count_elems_of_size() helper instead of open-coding
> it's logic. As a bonus this will now error out if the "reg" property
> values use an incorrect size (anything other than sizeof(u32)).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index c1a6af57dab5..9a6023638101 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   	int ret, i;
>   	u32 tmp, nsels;
>   
> -	if (!of_get_property(np, "reg", &nsels))
> -		return -EINVAL;
> -
> -	nsels /= sizeof(u32);
> +	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!nsels || nsels > MAX_CE_NUM) {
>   		dev_err(dev, "invalid register property size\n");
>   		return -EINVAL;
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the of_property_count_elems_of_size() helper instead of open-coding
> it's logic. As a bonus this will now error out if the "reg" property
> values use an incorrect size (anything other than sizeof(u32)).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index c1a6af57dab5..9a6023638101 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   	int ret, i;
>   	u32 tmp, nsels;
>   
> -	if (!of_get_property(np, "reg", &nsels))
> -		return -EINVAL;
> -
> -	nsels /= sizeof(u32);
> +	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!nsels || nsels > MAX_CE_NUM) {
>   		dev_err(dev, "invalid register property size\n");
>   		return -EINVAL;
> 

Re: [PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the of_property_count_elems_of_size() helper instead of open-coding
> it's logic. As a bonus this will now error out if the "reg" property
> values use an incorrect size (anything other than sizeof(u32)).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index c1a6af57dab5..9a6023638101 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   	int ret, i;
>   	u32 tmp, nsels;
>   
> -	if (!of_get_property(np, "reg", &nsels))
> -		return -EINVAL;
> -
> -	nsels /= sizeof(u32);
> +	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!nsels || nsels > MAX_CE_NUM) {
>   		dev_err(dev, "invalid register property size\n");
>   		return -EINVAL;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] mtd: rawnand: meson: use of_property_count_elems_of_size helper

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Use the of_property_count_elems_of_size() helper instead of open-coding
> it's logic. As a bonus this will now error out if the "reg" property
> values use an incorrect size (anything other than sizeof(u32)).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index c1a6af57dab5..9a6023638101 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -1233,10 +1233,7 @@ meson_nfc_nand_chip_init(struct device *dev,
>   	int ret, i;
>   	u32 tmp, nsels;
>   
> -	if (!of_get_property(np, "reg", &nsels))
> -		return -EINVAL;
> -
> -	nsels /= sizeof(u32);
> +	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (!nsels || nsels > MAX_CE_NUM) {
>   		dev_err(dev, "invalid register property size\n");
>   		return -EINVAL;
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Martin Blumenstingl]

This simplifies the code because it gets rid of the casts to an
u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
Also it gets rid of the cast of the u8 databuf pointer to a void
pointer.
The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
pointer types themselves because it only passes them to dma_map_single
which accepts a void pointer.

No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 9a6023638101..57cc4bd3f665 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
 	return ret;
 }
 
-static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
-				      int datalen, u8 *infobuf, int infolen,
+static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
+				      int datalen, void *infobuf, int infolen,
 				      enum dma_data_direction dir)
 {
 	struct meson_nfc *nfc = nand_get_controller_data(nand);
 	u32 cmd;
 	int ret = 0;
 
-	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
+	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
 	ret = dma_mapping_error(nfc->dev, nfc->daddr);
 	if (ret) {
 		dev_err(nfc->dev, "DMA mapping error\n");
@@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_TO_DEVICE);
 	if (ret)
 		return ret;
@@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_FROM_DEVICE);
 	if (ret)
 		return ret;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Martin Blumenstingl]

This simplifies the code because it gets rid of the casts to an
u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
Also it gets rid of the cast of the u8 databuf pointer to a void
pointer.
The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
pointer types themselves because it only passes them to dma_map_single
which accepts a void pointer.

No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 9a6023638101..57cc4bd3f665 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
 	return ret;
 }
 
-static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
-				      int datalen, u8 *infobuf, int infolen,
+static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
+				      int datalen, void *infobuf, int infolen,
 				      enum dma_data_direction dir)
 {
 	struct meson_nfc *nfc = nand_get_controller_data(nand);
 	u32 cmd;
 	int ret = 0;
 
-	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
+	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
 	ret = dma_mapping_error(nfc->dev, nfc->daddr);
 	if (ret) {
 		dev_err(nfc->dev, "DMA mapping error\n");
@@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_TO_DEVICE);
 	if (ret)
 		return ret;
@@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_FROM_DEVICE);
 	if (ret)
 		return ret;
-- 
2.21.0

[PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Martin Blumenstingl]

This simplifies the code because it gets rid of the casts to an
u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
Also it gets rid of the cast of the u8 databuf pointer to a void
pointer.
The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
pointer types themselves because it only passes them to dma_map_single
which accepts a void pointer.

No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 9a6023638101..57cc4bd3f665 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
 	return ret;
 }
 
-static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
-				      int datalen, u8 *infobuf, int infolen,
+static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
+				      int datalen, void *infobuf, int infolen,
 				      enum dma_data_direction dir)
 {
 	struct meson_nfc *nfc = nand_get_controller_data(nand);
 	u32 cmd;
 	int ret = 0;
 
-	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
+	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
 	ret = dma_mapping_error(nfc->dev, nfc->daddr);
 	if (ret) {
 		dev_err(nfc->dev, "DMA mapping error\n");
@@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_TO_DEVICE);
 	if (ret)
 		return ret;
@@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_FROM_DEVICE);
 	if (ret)
 		return ret;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Martin Blumenstingl]

This simplifies the code because it gets rid of the casts to an
u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
Also it gets rid of the cast of the u8 databuf pointer to a void
pointer.
The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
pointer types themselves because it only passes them to dma_map_single
which accepts a void pointer.

No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 9a6023638101..57cc4bd3f665 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
 	return ret;
 }
 
-static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
-				      int datalen, u8 *infobuf, int infolen,
+static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
+				      int datalen, void *infobuf, int infolen,
 				      enum dma_data_direction dir)
 {
 	struct meson_nfc *nfc = nand_get_controller_data(nand);
 	u32 cmd;
 	int ret = 0;
 
-	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
+	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
 	ret = dma_mapping_error(nfc->dev, nfc->daddr);
 	if (ret) {
 		dev_err(nfc->dev, "DMA mapping error\n");
@@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_TO_DEVICE);
 	if (ret)
 		return ret;
@@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_FROM_DEVICE);
 	if (ret)
 		return ret;
-- 
2.21.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> This simplifies the code because it gets rid of the casts to an
> u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
> Also it gets rid of the cast of the u8 databuf pointer to a void
> pointer.
> The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
> pointer types themselves because it only passes them to dma_map_single
> which accepts a void pointer.
> 
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 9a6023638101..57cc4bd3f665 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
>   	return ret;
>   }
>   
> -static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
> -				      int datalen, u8 *infobuf, int infolen,
> +static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
> +				      int datalen, void *infobuf, int infolen,
>   				      enum dma_data_direction dir)
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   {
>   	struct meson_nfc *nfc = nand_get_controller_data(nand);
>   	u32 cmd;
>   	int ret = 0;
>   
> -	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
> +	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
>   	ret = dma_mapping_error(nfc->dev, nfc->daddr);
>   	if (ret) {
>   		dev_err(nfc->dev, "DMA mapping error\n");
> @@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
>   					 info_len, DMA_TO_DEVICE);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (ret)
>   		return ret;
> @@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   					 info_len, DMA_FROM_DEVICE);
>   	if (ret)
>   		return ret;
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> This simplifies the code because it gets rid of the casts to an
> u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
> Also it gets rid of the cast of the u8 databuf pointer to a void
> pointer.
> The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
> pointer types themselves because it only passes them to dma_map_single
> which accepts a void pointer.
> 
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 9a6023638101..57cc4bd3f665 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
>   	return ret;
>   }
>   
> -static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
> -				      int datalen, u8 *infobuf, int infolen,
> +static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
> +				      int datalen, void *infobuf, int infolen,
>   				      enum dma_data_direction dir)
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   {
>   	struct meson_nfc *nfc = nand_get_controller_data(nand);
>   	u32 cmd;
>   	int ret = 0;
>   
> -	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
> +	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
>   	ret = dma_mapping_error(nfc->dev, nfc->daddr);
>   	if (ret) {
>   		dev_err(nfc->dev, "DMA mapping error\n");
> @@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
>   					 info_len, DMA_TO_DEVICE);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (ret)
>   		return ret;
> @@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   					 info_len, DMA_FROM_DEVICE);
>   	if (ret)
>   		return ret;
> 

Re: [PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> This simplifies the code because it gets rid of the casts to an
> u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
> Also it gets rid of the cast of the u8 databuf pointer to a void
> pointer.
> The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
> pointer types themselves because it only passes them to dma_map_single
> which accepts a void pointer.
> 
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 9a6023638101..57cc4bd3f665 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
>   	return ret;
>   }
>   
> -static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
> -				      int datalen, u8 *infobuf, int infolen,
> +static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
> +				      int datalen, void *infobuf, int infolen,
>   				      enum dma_data_direction dir)
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   {
>   	struct meson_nfc *nfc = nand_get_controller_data(nand);
>   	u32 cmd;
>   	int ret = 0;
>   
> -	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
> +	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
>   	ret = dma_mapping_error(nfc->dev, nfc->daddr);
>   	if (ret) {
>   		dev_err(nfc->dev, "DMA mapping error\n");
> @@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
>   					 info_len, DMA_TO_DEVICE);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (ret)
>   		return ret;
> @@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   					 info_len, DMA_FROM_DEVICE);
>   	if (ret)
>   		return ret;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> This simplifies the code because it gets rid of the casts to an
> u8-pointer when passing "info_buf" from struct meson_nfc_nand_chip.
> Also it gets rid of the cast of the u8 databuf pointer to a void
> pointer.
> The logic inside meson_nfc_dma_buffer_setup() doesn't care about the
> pointer types themselves because it only passes them to dma_map_single
> which accepts a void pointer.
> 
> No functional changes.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 9a6023638101..57cc4bd3f665 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
>   	return ret;
>   }
>   
> -static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
> -				      int datalen, u8 *infobuf, int infolen,
> +static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
> +				      int datalen, void *infobuf, int infolen,
>   				      enum dma_data_direction dir)
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   {
>   	struct meson_nfc *nfc = nand_get_controller_data(nand);
>   	u32 cmd;
>   	int ret = 0;
>   
> -	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
> +	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
>   	ret = dma_mapping_error(nfc->dev, nfc->daddr);
>   	if (ret) {
>   		dev_err(nfc->dev, "DMA mapping error\n");
> @@ -645,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
>   					 info_len, DMA_TO_DEVICE);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   	if (ret)
>   		return ret;
> @@ -729,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
>   		return ret;
>   
>   	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
> -					 data_len, (u8 *)meson_chip->info_buf,
> +					 data_len, meson_chip->info_buf,
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   					 info_len, DMA_FROM_DEVICE);
>   	if (ret)
>   		return ret;
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Documentation/scheduler/completion.txt states:
  Calling init_completion() on the same completion object twice is
  most likely a bug as it re-initializes the queue to an empty queue and
  enqueued tasks could get "lost" - use reinit_completion() in that case,
  but be aware of other races.

Initialize nfc->completion in meson_nfc_probe using init_completion and
change the call in meson_nfc_queue_rb to reinit_completion so the logic
matches what the documentation suggests.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 57cc4bd3f665..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
 	cfg |= NFC_RB_IRQ_EN;
 	writel(cfg, nfc->reg_base + NFC_REG_CFG);
 
-	init_completion(&nfc->completion);
+	reinit_completion(&nfc->completion);
 
 	/* use the max erase time as the maximum clock for waiting R/B */
 	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
 
 	nand_controller_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
+	init_completion(&nfc->completion);
 
 	nfc->dev = dev;
 
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Documentation/scheduler/completion.txt states:
  Calling init_completion() on the same completion object twice is
  most likely a bug as it re-initializes the queue to an empty queue and
  enqueued tasks could get "lost" - use reinit_completion() in that case,
  but be aware of other races.

Initialize nfc->completion in meson_nfc_probe using init_completion and
change the call in meson_nfc_queue_rb to reinit_completion so the logic
matches what the documentation suggests.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 57cc4bd3f665..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
 	cfg |= NFC_RB_IRQ_EN;
 	writel(cfg, nfc->reg_base + NFC_REG_CFG);
 
-	init_completion(&nfc->completion);
+	reinit_completion(&nfc->completion);
 
 	/* use the max erase time as the maximum clock for waiting R/B */
 	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
 
 	nand_controller_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
+	init_completion(&nfc->completion);
 
 	nfc->dev = dev;
 
-- 
2.21.0

[PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Documentation/scheduler/completion.txt states:
  Calling init_completion() on the same completion object twice is
  most likely a bug as it re-initializes the queue to an empty queue and
  enqueued tasks could get "lost" - use reinit_completion() in that case,
  but be aware of other races.

Initialize nfc->completion in meson_nfc_probe using init_completion and
change the call in meson_nfc_queue_rb to reinit_completion so the logic
matches what the documentation suggests.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 57cc4bd3f665..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
 	cfg |= NFC_RB_IRQ_EN;
 	writel(cfg, nfc->reg_base + NFC_REG_CFG);
 
-	init_completion(&nfc->completion);
+	reinit_completion(&nfc->completion);
 
 	/* use the max erase time as the maximum clock for waiting R/B */
 	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
 
 	nand_controller_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
+	init_completion(&nfc->completion);
 
 	nfc->dev = dev;
 
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Documentation/scheduler/completion.txt states:
  Calling init_completion() on the same completion object twice is
  most likely a bug as it re-initializes the queue to an empty queue and
  enqueued tasks could get "lost" - use reinit_completion() in that case,
  but be aware of other races.

Initialize nfc->completion in meson_nfc_probe using init_completion and
change the call in meson_nfc_queue_rb to reinit_completion so the logic
matches what the documentation suggests.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 57cc4bd3f665..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
 	cfg |= NFC_RB_IRQ_EN;
 	writel(cfg, nfc->reg_base + NFC_REG_CFG);
 
-	init_completion(&nfc->completion);
+	reinit_completion(&nfc->completion);
 
 	/* use the max erase time as the maximum clock for waiting R/B */
 	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
 
 	nand_controller_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
+	init_completion(&nfc->completion);
 
 	nfc->dev = dev;
 
-- 
2.21.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Documentation/scheduler/completion.txt states:
>    Calling init_completion() on the same completion object twice is
>    most likely a bug as it re-initializes the queue to an empty queue and
>    enqueued tasks could get "lost" - use reinit_completion() in that case,
>    but be aware of other races.
> 
> Initialize nfc->completion in meson_nfc_probe using init_completion and
> change the call in meson_nfc_queue_rb to reinit_completion so the logic
> matches what the documentation suggests.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 57cc4bd3f665..ea57ddcec41e 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>   	cfg |= NFC_RB_IRQ_EN;
>   	writel(cfg, nfc->reg_base + NFC_REG_CFG);
>   
> -	init_completion(&nfc->completion);
> +	reinit_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	/* use the max erase time as the maximum clock for waiting R/B */
>   	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
> @@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>   
>   	nand_controller_init(&nfc->controller);
>   	INIT_LIST_HEAD(&nfc->chips);
> +	init_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	nfc->dev = dev;
>   
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Documentation/scheduler/completion.txt states:
>    Calling init_completion() on the same completion object twice is
>    most likely a bug as it re-initializes the queue to an empty queue and
>    enqueued tasks could get "lost" - use reinit_completion() in that case,
>    but be aware of other races.
> 
> Initialize nfc->completion in meson_nfc_probe using init_completion and
> change the call in meson_nfc_queue_rb to reinit_completion so the logic
> matches what the documentation suggests.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 57cc4bd3f665..ea57ddcec41e 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>   	cfg |= NFC_RB_IRQ_EN;
>   	writel(cfg, nfc->reg_base + NFC_REG_CFG);
>   
> -	init_completion(&nfc->completion);
> +	reinit_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	/* use the max erase time as the maximum clock for waiting R/B */
>   	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
> @@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>   
>   	nand_controller_init(&nfc->controller);
>   	INIT_LIST_HEAD(&nfc->chips);
> +	init_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	nfc->dev = dev;
>   
> 

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Documentation/scheduler/completion.txt states:
>    Calling init_completion() on the same completion object twice is
>    most likely a bug as it re-initializes the queue to an empty queue and
>    enqueued tasks could get "lost" - use reinit_completion() in that case,
>    but be aware of other races.
> 
> Initialize nfc->completion in meson_nfc_probe using init_completion and
> change the call in meson_nfc_queue_rb to reinit_completion so the logic
> matches what the documentation suggests.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 57cc4bd3f665..ea57ddcec41e 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>   	cfg |= NFC_RB_IRQ_EN;
>   	writel(cfg, nfc->reg_base + NFC_REG_CFG);
>   
> -	init_completion(&nfc->completion);
> +	reinit_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	/* use the max erase time as the maximum clock for waiting R/B */
>   	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
> @@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>   
>   	nand_controller_init(&nfc->controller);
>   	INIT_LIST_HEAD(&nfc->chips);
> +	init_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	nfc->dev = dev;
>   
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

On 2019/4/12 6:00, Martin Blumenstingl wrote:
> Documentation/scheduler/completion.txt states:
>    Calling init_completion() on the same completion object twice is
>    most likely a bug as it re-initializes the queue to an empty queue and
>    enqueued tasks could get "lost" - use reinit_completion() in that case,
>    but be aware of other races.
> 
> Initialize nfc->completion in meson_nfc_probe using init_completion and
> change the call in meson_nfc_queue_rb to reinit_completion so the logic
> matches what the documentation suggests.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 57cc4bd3f665..ea57ddcec41e 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>   	cfg |= NFC_RB_IRQ_EN;
>   	writel(cfg, nfc->reg_base + NFC_REG_CFG);
>   
> -	init_completion(&nfc->completion);
> +	reinit_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	/* use the max erase time as the maximum clock for waiting R/B */
>   	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
> @@ -1380,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
>   
>   	nand_controller_init(&nfc->controller);
>   	INIT_LIST_HEAD(&nfc->chips);
> +	init_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@amlogic.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
>   
>   	nfc->dev = dev;
>   
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Hi Liang,

On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>
>
> On 2019/4/12 6:00, Martin Blumenstingl wrote:
> > Documentation/scheduler/completion.txt states:
> >    Calling init_completion() on the same completion object twice is
> >    most likely a bug as it re-initializes the queue to an empty queue and
> >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> >    but be aware of other races.
> >
> > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > matches what the documentation suggests.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > index 57cc4bd3f665..ea57ddcec41e 100644
> > --- a/drivers/mtd/nand/raw/meson_nand.c
> > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> >       cfg |= NFC_RB_IRQ_EN;
> >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> >
> > -     init_completion(&nfc->completion);
> > +     reinit_completion(&nfc->completion);
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
thank you for reviewing and testing my patches!

[...]
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
please consider the following note for future code-reviews:
most maintainers take the patch from patchwork and apply it to their git tree.
however, patchwork is not smart enough to detect when the same
Tested-by/Acked-by is sent multiple times.
this results in the same Tested-by/Acked-by being listed multiple
times in the final commit: [0]

what I do instead is to reply with one set of Tested-by/Acked-by
(below the author's Signed-off-by) which is then valid for the whole
patch.
There's no problem to have Tested-by and Acked-by at the same time,
the issue only shows up if you send Acked-by (or any other tag) for
the same patch multiple times.


Have a great day!
Regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Hi Liang,

On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>
>
> On 2019/4/12 6:00, Martin Blumenstingl wrote:
> > Documentation/scheduler/completion.txt states:
> >    Calling init_completion() on the same completion object twice is
> >    most likely a bug as it re-initializes the queue to an empty queue and
> >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> >    but be aware of other races.
> >
> > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > matches what the documentation suggests.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > index 57cc4bd3f665..ea57ddcec41e 100644
> > --- a/drivers/mtd/nand/raw/meson_nand.c
> > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> >       cfg |= NFC_RB_IRQ_EN;
> >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> >
> > -     init_completion(&nfc->completion);
> > +     reinit_completion(&nfc->completion);
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
thank you for reviewing and testing my patches!

[...]
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
please consider the following note for future code-reviews:
most maintainers take the patch from patchwork and apply it to their git tree.
however, patchwork is not smart enough to detect when the same
Tested-by/Acked-by is sent multiple times.
this results in the same Tested-by/Acked-by being listed multiple
times in the final commit: [0]

what I do instead is to reply with one set of Tested-by/Acked-by
(below the author's Signed-off-by) which is then valid for the whole
patch.
There's no problem to have Tested-by and Acked-by at the same time,
the issue only shows up if you send Acked-by (or any other tag) for
the same patch multiple times.


Have a great day!
Regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Hi Liang,

On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>
>
> On 2019/4/12 6:00, Martin Blumenstingl wrote:
> > Documentation/scheduler/completion.txt states:
> >    Calling init_completion() on the same completion object twice is
> >    most likely a bug as it re-initializes the queue to an empty queue and
> >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> >    but be aware of other races.
> >
> > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > matches what the documentation suggests.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > index 57cc4bd3f665..ea57ddcec41e 100644
> > --- a/drivers/mtd/nand/raw/meson_nand.c
> > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> >       cfg |= NFC_RB_IRQ_EN;
> >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> >
> > -     init_completion(&nfc->completion);
> > +     reinit_completion(&nfc->completion);
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
thank you for reviewing and testing my patches!

[...]
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
please consider the following note for future code-reviews:
most maintainers take the patch from patchwork and apply it to their git tree.
however, patchwork is not smart enough to detect when the same
Tested-by/Acked-by is sent multiple times.
this results in the same Tested-by/Acked-by being listed multiple
times in the final commit: [0]

what I do instead is to reply with one set of Tested-by/Acked-by
(below the author's Signed-off-by) which is then valid for the whole
patch.
There's no problem to have Tested-by and Acked-by at the same time,
the issue only shows up if you send Acked-by (or any other tag) for
the same patch multiple times.


Have a great day!
Regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Martin Blumenstingl]

Hi Liang,

On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>
>
> On 2019/4/12 6:00, Martin Blumenstingl wrote:
> > Documentation/scheduler/completion.txt states:
> >    Calling init_completion() on the same completion object twice is
> >    most likely a bug as it re-initializes the queue to an empty queue and
> >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> >    but be aware of other races.
> >
> > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > matches what the documentation suggests.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > index 57cc4bd3f665..ea57ddcec41e 100644
> > --- a/drivers/mtd/nand/raw/meson_nand.c
> > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> >       cfg |= NFC_RB_IRQ_EN;
> >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> >
> > -     init_completion(&nfc->completion);
> > +     reinit_completion(&nfc->completion);
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
thank you for reviewing and testing my patches!

[...]
> Tested-by:Liang Yang <liang.yang@amlogic.com>
> Acked-by: Liang Yang <liang.yang@amlogic.com>
please consider the following note for future code-reviews:
most maintainers take the patch from patchwork and apply it to their git tree.
however, patchwork is not smart enough to detect when the same
Tested-by/Acked-by is sent multiple times.
this results in the same Tested-by/Acked-by being listed multiple
times in the final commit: [0]

what I do instead is to reply with one set of Tested-by/Acked-by
(below the author's Signed-off-by) which is then valid for the whole
patch.
There's no problem to have Tested-by and Acked-by at the same time,
the issue only shows up if you send Acked-by (or any other tag) for
the same patch multiple times.


Have a great day!
Regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

Hi Martin,

On 2019/4/19 3:44, Martin Blumenstingl wrote:
> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>>
>>
>> On 2019/4/12 6:00, Martin Blumenstingl wrote:
>>> Documentation/scheduler/completion.txt states:
>>>     Calling init_completion() on the same completion object twice is
>>>     most likely a bug as it re-initializes the queue to an empty queue and
>>>     enqueued tasks could get "lost" - use reinit_completion() in that case,
>>>     but be aware of other races.
>>>
>>> Initialize nfc->completion in meson_nfc_probe using init_completion and
>>> change the call in meson_nfc_queue_rb to reinit_completion so the logic
>>> matches what the documentation suggests.
>>>
>>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>> ---
>>>    drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>>> index 57cc4bd3f665..ea57ddcec41e 100644
>>> --- a/drivers/mtd/nand/raw/meson_nand.c
>>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>>> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>>>        cfg |= NFC_RB_IRQ_EN;
>>>        writel(cfg, nfc->reg_base + NFC_REG_CFG);
>>>
>>> -     init_completion(&nfc->completion);
>>> +     reinit_completion(&nfc->completion);
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> thank you for reviewing and testing my patches!
> 
> [...]
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.
> 
Thanks. Well, I known about it now.

> 
> Have a great day!
> Regards,
> Martin
> 
> 
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b
> 
> .
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

Hi Martin,

On 2019/4/19 3:44, Martin Blumenstingl wrote:
> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>>
>>
>> On 2019/4/12 6:00, Martin Blumenstingl wrote:
>>> Documentation/scheduler/completion.txt states:
>>>     Calling init_completion() on the same completion object twice is
>>>     most likely a bug as it re-initializes the queue to an empty queue and
>>>     enqueued tasks could get "lost" - use reinit_completion() in that case,
>>>     but be aware of other races.
>>>
>>> Initialize nfc->completion in meson_nfc_probe using init_completion and
>>> change the call in meson_nfc_queue_rb to reinit_completion so the logic
>>> matches what the documentation suggests.
>>>
>>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>> ---
>>>    drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>>> index 57cc4bd3f665..ea57ddcec41e 100644
>>> --- a/drivers/mtd/nand/raw/meson_nand.c
>>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>>> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>>>        cfg |= NFC_RB_IRQ_EN;
>>>        writel(cfg, nfc->reg_base + NFC_REG_CFG);
>>>
>>> -     init_completion(&nfc->completion);
>>> +     reinit_completion(&nfc->completion);
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> thank you for reviewing and testing my patches!
> 
> [...]
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.
> 
Thanks. Well, I known about it now.

> 
> Have a great day!
> Regards,
> Martin
> 
> 
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b
> 
> .
> 

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

Hi Martin,

On 2019/4/19 3:44, Martin Blumenstingl wrote:
> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>>
>>
>> On 2019/4/12 6:00, Martin Blumenstingl wrote:
>>> Documentation/scheduler/completion.txt states:
>>>     Calling init_completion() on the same completion object twice is
>>>     most likely a bug as it re-initializes the queue to an empty queue and
>>>     enqueued tasks could get "lost" - use reinit_completion() in that case,
>>>     but be aware of other races.
>>>
>>> Initialize nfc->completion in meson_nfc_probe using init_completion and
>>> change the call in meson_nfc_queue_rb to reinit_completion so the logic
>>> matches what the documentation suggests.
>>>
>>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>> ---
>>>    drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>>> index 57cc4bd3f665..ea57ddcec41e 100644
>>> --- a/drivers/mtd/nand/raw/meson_nand.c
>>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>>> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>>>        cfg |= NFC_RB_IRQ_EN;
>>>        writel(cfg, nfc->reg_base + NFC_REG_CFG);
>>>
>>> -     init_completion(&nfc->completion);
>>> +     reinit_completion(&nfc->completion);
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> thank you for reviewing and testing my patches!
> 
> [...]
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.
> 
Thanks. Well, I known about it now.

> 
> Have a great day!
> Regards,
> Martin
> 
> 
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b
> 
> .
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Liang Yang]

Hi Martin,

On 2019/4/19 3:44, Martin Blumenstingl wrote:
> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
>>
>>
>> On 2019/4/12 6:00, Martin Blumenstingl wrote:
>>> Documentation/scheduler/completion.txt states:
>>>     Calling init_completion() on the same completion object twice is
>>>     most likely a bug as it re-initializes the queue to an empty queue and
>>>     enqueued tasks could get "lost" - use reinit_completion() in that case,
>>>     but be aware of other races.
>>>
>>> Initialize nfc->completion in meson_nfc_probe using init_completion and
>>> change the call in meson_nfc_queue_rb to reinit_completion so the logic
>>> matches what the documentation suggests.
>>>
>>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>> ---
>>>    drivers/mtd/nand/raw/meson_nand.c | 3 ++-
>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>>> index 57cc4bd3f665..ea57ddcec41e 100644
>>> --- a/drivers/mtd/nand/raw/meson_nand.c
>>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>>> @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
>>>        cfg |= NFC_RB_IRQ_EN;
>>>        writel(cfg, nfc->reg_base + NFC_REG_CFG);
>>>
>>> -     init_completion(&nfc->completion);
>>> +     reinit_completion(&nfc->completion);
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> thank you for reviewing and testing my patches!
> 
> [...]
>> Tested-by:Liang Yang <liang.yang@amlogic.com>
>> Acked-by: Liang Yang <liang.yang@amlogic.com>
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.
> 
Thanks. Well, I known about it now.

> 
> Have a great day!
> Regards,
> Martin
> 
> 
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b
> 
> .
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Thu,
18 Apr 2019 21:44:05 +0200:

> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
> >
> >
> > On 2019/4/12 6:00, Martin Blumenstingl wrote:  
> > > Documentation/scheduler/completion.txt states:
> > >    Calling init_completion() on the same completion object twice is
> > >    most likely a bug as it re-initializes the queue to an empty queue and
> > >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> > >    but be aware of other races.
> > >
> > > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > > matches what the documentation suggests.
> > >
> > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > > ---
> > >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> > >   1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > > index 57cc4bd3f665..ea57ddcec41e 100644
> > > --- a/drivers/mtd/nand/raw/meson_nand.c
> > > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> > >       cfg |= NFC_RB_IRQ_EN;
> > >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> > >
> > > -     init_completion(&nfc->completion);
> > > +     reinit_completion(&nfc->completion);  
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> thank you for reviewing and testing my patches!
> 
> [...]
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.

Crap, I did not noticed that.

Thanks for pointing it. I don't have time right now to fix it and send
a new PR, I'll see in one week.


Thanks,
Miquèl

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Thu,
18 Apr 2019 21:44:05 +0200:

> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
> >
> >
> > On 2019/4/12 6:00, Martin Blumenstingl wrote:  
> > > Documentation/scheduler/completion.txt states:
> > >    Calling init_completion() on the same completion object twice is
> > >    most likely a bug as it re-initializes the queue to an empty queue and
> > >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> > >    but be aware of other races.
> > >
> > > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > > matches what the documentation suggests.
> > >
> > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > > ---
> > >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> > >   1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > > index 57cc4bd3f665..ea57ddcec41e 100644
> > > --- a/drivers/mtd/nand/raw/meson_nand.c
> > > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> > >       cfg |= NFC_RB_IRQ_EN;
> > >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> > >
> > > -     init_completion(&nfc->completion);
> > > +     reinit_completion(&nfc->completion);  
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> thank you for reviewing and testing my patches!
> 
> [...]
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.

Crap, I did not noticed that.

Thanks for pointing it. I don't have time right now to fix it and send
a new PR, I'll see in one week.


Thanks,
Miquèl

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Thu,
18 Apr 2019 21:44:05 +0200:

> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
> >
> >
> > On 2019/4/12 6:00, Martin Blumenstingl wrote:  
> > > Documentation/scheduler/completion.txt states:
> > >    Calling init_completion() on the same completion object twice is
> > >    most likely a bug as it re-initializes the queue to an empty queue and
> > >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> > >    but be aware of other races.
> > >
> > > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > > matches what the documentation suggests.
> > >
> > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > > ---
> > >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> > >   1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > > index 57cc4bd3f665..ea57ddcec41e 100644
> > > --- a/drivers/mtd/nand/raw/meson_nand.c
> > > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> > >       cfg |= NFC_RB_IRQ_EN;
> > >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> > >
> > > -     init_completion(&nfc->completion);
> > > +     reinit_completion(&nfc->completion);  
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> thank you for reviewing and testing my patches!
> 
> [...]
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.

Crap, I did not noticed that.

Thanks for pointing it. I don't have time right now to fix it and send
a new PR, I'll see in one week.


Thanks,
Miquèl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Thu,
18 Apr 2019 21:44:05 +0200:

> Hi Liang,
> 
> On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@amlogic.com> wrote:
> >
> >
> > On 2019/4/12 6:00, Martin Blumenstingl wrote:  
> > > Documentation/scheduler/completion.txt states:
> > >    Calling init_completion() on the same completion object twice is
> > >    most likely a bug as it re-initializes the queue to an empty queue and
> > >    enqueued tasks could get "lost" - use reinit_completion() in that case,
> > >    but be aware of other races.
> > >
> > > Initialize nfc->completion in meson_nfc_probe using init_completion and
> > > change the call in meson_nfc_queue_rb to reinit_completion so the logic
> > > matches what the documentation suggests.
> > >
> > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > > ---
> > >   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
> > >   1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > > index 57cc4bd3f665..ea57ddcec41e 100644
> > > --- a/drivers/mtd/nand/raw/meson_nand.c
> > > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > > @@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
> > >       cfg |= NFC_RB_IRQ_EN;
> > >       writel(cfg, nfc->reg_base + NFC_REG_CFG);
> > >
> > > -     init_completion(&nfc->completion);
> > > +     reinit_completion(&nfc->completion);  
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> thank you for reviewing and testing my patches!
> 
> [...]
> > Tested-by:Liang Yang <liang.yang@amlogic.com>
> > Acked-by: Liang Yang <liang.yang@amlogic.com>  
> please consider the following note for future code-reviews:
> most maintainers take the patch from patchwork and apply it to their git tree.
> however, patchwork is not smart enough to detect when the same
> Tested-by/Acked-by is sent multiple times.
> this results in the same Tested-by/Acked-by being listed multiple
> times in the final commit: [0]
> 
> what I do instead is to reply with one set of Tested-by/Acked-by
> (below the author's Signed-off-by) which is then valid for the whole
> patch.
> There's no problem to have Tested-by and Acked-by at the same time,
> the issue only shows up if you send Acked-by (or any other tag) for
> the same patch multiple times.

Crap, I did not noticed that.

Thanks for pointing it. I don't have time right now to fix it and send
a new PR, I'll see in one week.


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 0/4] meson-nand: small code improvements

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Fri,
12 Apr 2019 00:00:52 +0200:

> This series comes with four small improvements for the meson-nand
> driver:
> * the first patches are replacing open-coded logic with existing
>   utilities / helpers
> * the third patch drops some unnecessary casting after changing
>   the type of the info buffer parameter from "u8 *" to "void *"
> * the fourth patch adjusts the usage of init_completion with what the
>   documentation suggests
> 
> I have tested these patches as best as I could on my Meson8m2 board
> using experimental patches on top of this series which add support for
> this older SoC to the meson-nand driver.
> 
> Liang, can you please test this series on GXL and/or AXG so I don't
> break the NFC driver on these newer SoCs? All of my GXL/GXM boards
> have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
> myself.
> 
> This series is meant to be applied to the nand/next tree.
> 
> 
> Martin Blumenstingl (4):
>   mtd: rawnand: meson: use struct_size macro
>   mtd: rawnand: meson: use of_property_count_elems_of_size helper
>   mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
>   mtd: rawnand: meson: only initialize the RB completion once
> 
>  drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
>  1 file changed, 9 insertions(+), 12 deletions(-)
> 

Series applied to 
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git 
branch nand/next.

Thanks,
Miquèl

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/4] meson-nand: small code improvements

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Fri,
12 Apr 2019 00:00:52 +0200:

> This series comes with four small improvements for the meson-nand
> driver:
> * the first patches are replacing open-coded logic with existing
>   utilities / helpers
> * the third patch drops some unnecessary casting after changing
>   the type of the info buffer parameter from "u8 *" to "void *"
> * the fourth patch adjusts the usage of init_completion with what the
>   documentation suggests
> 
> I have tested these patches as best as I could on my Meson8m2 board
> using experimental patches on top of this series which add support for
> this older SoC to the meson-nand driver.
> 
> Liang, can you please test this series on GXL and/or AXG so I don't
> break the NFC driver on these newer SoCs? All of my GXL/GXM boards
> have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
> myself.
> 
> This series is meant to be applied to the nand/next tree.
> 
> 
> Martin Blumenstingl (4):
>   mtd: rawnand: meson: use struct_size macro
>   mtd: rawnand: meson: use of_property_count_elems_of_size helper
>   mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
>   mtd: rawnand: meson: only initialize the RB completion once
> 
>  drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
>  1 file changed, 9 insertions(+), 12 deletions(-)
> 

Series applied to 
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git 
branch nand/next.

Thanks,
Miquèl

Re: [PATCH 0/4] meson-nand: small code improvements

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Fri,
12 Apr 2019 00:00:52 +0200:

> This series comes with four small improvements for the meson-nand
> driver:
> * the first patches are replacing open-coded logic with existing
>   utilities / helpers
> * the third patch drops some unnecessary casting after changing
>   the type of the info buffer parameter from "u8 *" to "void *"
> * the fourth patch adjusts the usage of init_completion with what the
>   documentation suggests
> 
> I have tested these patches as best as I could on my Meson8m2 board
> using experimental patches on top of this series which add support for
> this older SoC to the meson-nand driver.
> 
> Liang, can you please test this series on GXL and/or AXG so I don't
> break the NFC driver on these newer SoCs? All of my GXL/GXM boards
> have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
> myself.
> 
> This series is meant to be applied to the nand/next tree.
> 
> 
> Martin Blumenstingl (4):
>   mtd: rawnand: meson: use struct_size macro
>   mtd: rawnand: meson: use of_property_count_elems_of_size helper
>   mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
>   mtd: rawnand: meson: only initialize the RB completion once
> 
>  drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
>  1 file changed, 9 insertions(+), 12 deletions(-)
> 

Series applied to 
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git 
branch nand/next.

Thanks,
Miquèl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/4] meson-nand: small code improvements

[Miquel Raynal]

Hi Martin,

Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote on Fri,
12 Apr 2019 00:00:52 +0200:

> This series comes with four small improvements for the meson-nand
> driver:
> * the first patches are replacing open-coded logic with existing
>   utilities / helpers
> * the third patch drops some unnecessary casting after changing
>   the type of the info buffer parameter from "u8 *" to "void *"
> * the fourth patch adjusts the usage of init_completion with what the
>   documentation suggests
> 
> I have tested these patches as best as I could on my Meson8m2 board
> using experimental patches on top of this series which add support for
> this older SoC to the meson-nand driver.
> 
> Liang, can you please test this series on GXL and/or AXG so I don't
> break the NFC driver on these newer SoCs? All of my GXL/GXM boards
> have eMMC instead of raw NAND, so I cannot test it on these newer SoCs
> myself.
> 
> This series is meant to be applied to the nand/next tree.
> 
> 
> Martin Blumenstingl (4):
>   mtd: rawnand: meson: use struct_size macro
>   mtd: rawnand: meson: use of_property_count_elems_of_size helper
>   mtd: rawnand: meson: use a void pointer for meson_nfc_dma_buffer_setup
>   mtd: rawnand: meson: only initialize the RB completion once
> 
>  drivers/mtd/nand/raw/meson_nand.c | 21 +++++++++------------
>  1 file changed, 9 insertions(+), 12 deletions(-)
> 

Series applied to 
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git 
branch nand/next.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/