All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>,
	Hante Meuleman <hante.meuleman@broadcom.com>,
	Chi-Hsien Lin <chi-hsien.lin@cypress.com>,
	Wright Feng <wright.feng@cypress.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	linux-wireless@vger.kernel.org,
	brcm80211-dev-list.pdl@broadcom.com,
	brcm80211-dev-list@cypress.com, kernel-janitors@vger.kernel.org
Subject: [PATCH] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
Date: Wed, 24 Apr 2019 09:52:18 +0000	[thread overview]
Message-ID: <20190424095218.GB16450@mwanda> (raw)

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
index 8eff2753abad..d493021f6031 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
@@ -35,9 +35,10 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 	struct brcmf_if *ifp;
 	const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
 	struct sk_buff *reply;
-	int ret, payload, ret_len;
+	unsigned int payload, ret_len;
 	void *dcmd_buf = NULL, *wr_pointer;
 	u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
+	int ret;
 
 	if (len < sizeof(*cmdhdr)) {
 		brcmf_err("vendor command too short: %d\n", len);
@@ -65,7 +66,7 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 			brcmf_err("oversize return buffer %d\n", ret_len);
 			ret_len = BRCMF_DCMD_MAXLEN;
 		}
-		payload = max(ret_len, len) + 1;
+		payload = max_t(unsigned int, ret_len, len) + 1;
 		dcmd_buf = vzalloc(payload);
 		if (NULL = dcmd_buf)
 			return -ENOMEM;
-- 
2.18.0

WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>,
	Hante Meuleman <hante.meuleman@broadcom.com>,
	Chi-Hsien Lin <chi-hsien.lin@cypress.com>,
	Wright Feng <wright.feng@cypress.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	linux-wireless@vger.kernel.org,
	brcm80211-dev-list.pdl@broadcom.com,
	brcm80211-dev-list@cypress.com, kernel-janitors@vger.kernel.org
Subject: [PATCH] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
Date: Wed, 24 Apr 2019 12:52:18 +0300	[thread overview]
Message-ID: <20190424095218.GB16450@mwanda> (raw)

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
index 8eff2753abad..d493021f6031 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
@@ -35,9 +35,10 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 	struct brcmf_if *ifp;
 	const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
 	struct sk_buff *reply;
-	int ret, payload, ret_len;
+	unsigned int payload, ret_len;
 	void *dcmd_buf = NULL, *wr_pointer;
 	u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
+	int ret;
 
 	if (len < sizeof(*cmdhdr)) {
 		brcmf_err("vendor command too short: %d\n", len);
@@ -65,7 +66,7 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 			brcmf_err("oversize return buffer %d\n", ret_len);
 			ret_len = BRCMF_DCMD_MAXLEN;
 		}
-		payload = max(ret_len, len) + 1;
+		payload = max_t(unsigned int, ret_len, len) + 1;
 		dcmd_buf = vzalloc(payload);
 		if (NULL == dcmd_buf)
 			return -ENOMEM;
-- 
2.18.0


             reply	other threads:[~2019-04-24  9:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24  9:52 Dan Carpenter [this message]
2019-04-24  9:52 ` [PATCH] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler() Dan Carpenter
2019-05-01 15:25 ` Kalle Valo
2019-05-01 15:25   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190424095218.GB16450@mwanda \
    --to=dan.carpenter@oracle.com \
    --cc=arend.vanspriel@broadcom.com \
    --cc=brcm80211-dev-list.pdl@broadcom.com \
    --cc=brcm80211-dev-list@cypress.com \
    --cc=chi-hsien.lin@cypress.com \
    --cc=franky.lin@broadcom.com \
    --cc=hante.meuleman@broadcom.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wright.feng@cypress.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.