From: Johan Hovold <johan@kernel.org>
To: Alan Stern <stern@rowland.harvard.edu>,
Oliver Neukum <oneukum@suse.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: [2/5] USB: serial: clean up throttle handling
Date: Thu, 25 Apr 2019 18:05:37 +0200 [thread overview]
Message-ID: <20190425160540.10036-3-johan@kernel.org> (raw)
Clean up the throttle implementation by dropping the redundant
throttle_req flag which was a remnant from back when there was only a
single read URB.
Also convert the throttled flag to an atomic bit flag.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/generic.c | 34 ++++++++--------------------------
include/linux/usb/serial.h | 5 +----
2 files changed, 9 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 0fff4968ea1b..67cef3ef1e5f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -106,12 +106,8 @@ void usb_serial_generic_deregister(void)
int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result = 0;
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
- port->throttled = 0;
- port->throttle_req = 0;
- spin_unlock_irqrestore(&port->lock, flags);
+ clear_bit(USB_SERIAL_THROTTLED, &port->flags);
if (port->bulk_in_size)
result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
@@ -375,7 +371,6 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- unsigned long flags;
bool stopped = false;
int status = urb->status;
int i;
@@ -429,15 +424,10 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
if (stopped)
return;
- /* Throttle the device if requested by tty */
- spin_lock_irqsave(&port->lock, flags);
- port->throttled = port->throttle_req;
- if (!port->throttled) {
- spin_unlock_irqrestore(&port->lock, flags);
- usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
- } else {
- spin_unlock_irqrestore(&port->lock, flags);
- }
+ if (test_bit(USB_SERIAL_THROTTLED, &port->flags))
+ return;
+
+ usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
@@ -485,23 +475,16 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
void usb_serial_generic_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
- port->throttle_req = 1;
- spin_unlock_irqrestore(&port->lock, flags);
+ set_bit(USB_SERIAL_THROTTLED, &port->flags);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_throttle);
void usb_serial_generic_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- int was_throttled;
- spin_lock_irq(&port->lock);
- was_throttled = port->throttled;
- port->throttled = port->throttle_req = 0;
- spin_unlock_irq(&port->lock);
+ clear_bit(USB_SERIAL_THROTTLED, &port->flags);
/*
* Matches the smp_mb__after_atomic() in
@@ -509,8 +492,7 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
*/
smp_mb();
- if (was_throttled)
- usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
+ usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 1c19f77ed541..d8bdab8f3c26 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -28,6 +28,7 @@
/* USB serial flags */
#define USB_SERIAL_WRITE_BUSY 0
+#define USB_SERIAL_THROTTLED 1
/**
* usb_serial_port: structure for the specific ports of a device.
@@ -67,8 +68,6 @@
* @flags: usb serial port flags
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
- * @throttled: nonzero if the read urb is inactive to throttle the device
- * @throttle_req: nonzero if the tty wants to throttle us
* @dev: pointer to the serial device
*
* This structure is used by the usb-serial core and drivers for the specific
@@ -115,8 +114,6 @@ struct usb_serial_port {
unsigned long flags;
wait_queue_head_t write_wait;
struct work_struct work;
- char throttled;
- char throttle_req;
unsigned long sysrq; /* sysrq timeout */
struct device dev;
};
WARNING: multiple messages have this Message-ID (diff)
From: Johan Hovold <johan@kernel.org>
To: Alan Stern <stern@rowland.harvard.edu>,
Oliver Neukum <oneukum@suse.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: [PATCH 2/5] USB: serial: clean up throttle handling
Date: Thu, 25 Apr 2019 18:05:37 +0200 [thread overview]
Message-ID: <20190425160540.10036-3-johan@kernel.org> (raw)
Message-ID: <20190425160537.hShxciSxMoKv8X0_CqOsUhLOTgnL00vyHt13NQcLZL0@z> (raw)
In-Reply-To: <20190425160540.10036-1-johan@kernel.org>
Clean up the throttle implementation by dropping the redundant
throttle_req flag which was a remnant from back when there was only a
single read URB.
Also convert the throttled flag to an atomic bit flag.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/generic.c | 34 ++++++++--------------------------
include/linux/usb/serial.h | 5 +----
2 files changed, 9 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 0fff4968ea1b..67cef3ef1e5f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -106,12 +106,8 @@ void usb_serial_generic_deregister(void)
int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result = 0;
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
- port->throttled = 0;
- port->throttle_req = 0;
- spin_unlock_irqrestore(&port->lock, flags);
+ clear_bit(USB_SERIAL_THROTTLED, &port->flags);
if (port->bulk_in_size)
result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
@@ -375,7 +371,6 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- unsigned long flags;
bool stopped = false;
int status = urb->status;
int i;
@@ -429,15 +424,10 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
if (stopped)
return;
- /* Throttle the device if requested by tty */
- spin_lock_irqsave(&port->lock, flags);
- port->throttled = port->throttle_req;
- if (!port->throttled) {
- spin_unlock_irqrestore(&port->lock, flags);
- usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
- } else {
- spin_unlock_irqrestore(&port->lock, flags);
- }
+ if (test_bit(USB_SERIAL_THROTTLED, &port->flags))
+ return;
+
+ usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
@@ -485,23 +475,16 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
void usb_serial_generic_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
- port->throttle_req = 1;
- spin_unlock_irqrestore(&port->lock, flags);
+ set_bit(USB_SERIAL_THROTTLED, &port->flags);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_throttle);
void usb_serial_generic_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- int was_throttled;
- spin_lock_irq(&port->lock);
- was_throttled = port->throttled;
- port->throttled = port->throttle_req = 0;
- spin_unlock_irq(&port->lock);
+ clear_bit(USB_SERIAL_THROTTLED, &port->flags);
/*
* Matches the smp_mb__after_atomic() in
@@ -509,8 +492,7 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
*/
smp_mb();
- if (was_throttled)
- usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
+ usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 1c19f77ed541..d8bdab8f3c26 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -28,6 +28,7 @@
/* USB serial flags */
#define USB_SERIAL_WRITE_BUSY 0
+#define USB_SERIAL_THROTTLED 1
/**
* usb_serial_port: structure for the specific ports of a device.
@@ -67,8 +68,6 @@
* @flags: usb serial port flags
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
- * @throttled: nonzero if the read urb is inactive to throttle the device
- * @throttle_req: nonzero if the tty wants to throttle us
* @dev: pointer to the serial device
*
* This structure is used by the usb-serial core and drivers for the specific
@@ -115,8 +114,6 @@ struct usb_serial_port {
unsigned long flags;
wait_queue_head_t write_wait;
struct work_struct work;
- char throttled;
- char throttle_req;
unsigned long sysrq; /* sysrq timeout */
struct device dev;
};
--
2.21.0
next reply other threads:[~2019-04-25 16:05 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-25 16:05 Johan Hovold [this message]
2019-04-25 16:05 ` [PATCH 2/5] USB: serial: clean up throttle handling Johan Hovold
-- strict thread matches above, loose matches on Subject: below --
2019-04-29 10:10 [5/5] USB: cdc-acm: " Oliver Neukum
2019-04-29 10:10 ` [PATCH 5/5] " Oliver Neukum
2019-04-29 10:09 [4/5] USB: cdc-acm: fix unthrottle races Oliver Neukum
2019-04-29 10:09 ` [PATCH 4/5] " Oliver Neukum
2019-04-29 10:03 [1/5] USB: serial: " Johan Hovold
2019-04-29 10:03 ` [PATCH 1/5] " Johan Hovold
2019-04-29 9:50 [1/5] " Oliver Neukum
2019-04-29 9:50 ` [PATCH 1/5] " Oliver Neukum
2019-04-25 16:05 [5/5] USB: cdc-acm: clean up throttle handling Johan Hovold
2019-04-25 16:05 ` [PATCH 5/5] " Johan Hovold
2019-04-25 16:05 [4/5] USB: cdc-acm: fix unthrottle races Johan Hovold
2019-04-25 16:05 ` [PATCH 4/5] " Johan Hovold
2019-04-25 16:05 [3/5] USB: serial: generic: drop unnecessary goto Johan Hovold
2019-04-25 16:05 ` [PATCH 3/5] " Johan Hovold
2019-04-25 16:05 [PATCH 0/5] USB: fix tty unthrottle races Johan Hovold
2019-04-25 16:05 ` [1/5] USB: serial: fix " Johan Hovold
2019-04-25 16:05 ` [PATCH 1/5] " Johan Hovold
2019-05-13 10:43 ` Johan Hovold
2019-05-13 10:56 ` Greg Kroah-Hartman
2019-05-13 11:46 ` Johan Hovold
2019-05-13 12:51 ` Greg Kroah-Hartman
2019-05-13 12:59 ` Johan Hovold
2019-05-14 12:53 ` Sasha Levin
2019-05-14 12:57 ` Johan Hovold
2019-04-25 20:58 ` [PATCH 0/5] USB: fix tty " Alan Stern
2019-04-26 4:55 ` Johan Hovold
2019-04-29 9:30 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190425160540.10036-3-johan@kernel.org \
--to=johan@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.