All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: mika.westerberg@linux.intel.com, linus.walleij@linaro.org,
	hotwater438@tutanota.com, hdegoede@redhat.com,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pinctrl: intel: Clear interrupt status in unmask callback
Date: Sat, 27 Apr 2019 00:47:58 +0300	[thread overview]
Message-ID: <20190426214758.GC9224@smile.fi.intel.com> (raw)
In-Reply-To: <20190422044539.16085-1-kai.heng.feng@canonical.com>

On Mon, Apr 22, 2019 at 12:45:39PM +0800, Kai-Heng Feng wrote:
> Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was
> added because clearing interrupt status bit is required to avoid
> unexpected behavior.
> 
> Turns out the unmask callback also needs the fix, which can solve weird
> IRQ triggering issues on I2C touchpad ELAN1200.

> -static void intel_gpio_irq_enable(struct irq_data *d)
> -{
> -	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> -	struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
> -	const struct intel_community *community;
> -	const struct intel_padgroup *padgrp;
> -	int pin;
> -
> -	pin = intel_gpio_to_pin(pctrl, irqd_to_hwirq(d), &community, &padgrp);
> -	if (pin >= 0) {
> -		unsigned int gpp, gpp_offset, is_offset;
> -		unsigned long flags;
> -		u32 value;
> -
> -		gpp = padgrp->reg_num;
> -		gpp_offset = padgroup_offset(padgrp, pin);
> -		is_offset = community->is_offset + gpp * 4;
> -
> -		raw_spin_lock_irqsave(&pctrl->lock, flags);
> -		/* Clear interrupt status first to avoid unexpected interrupt */
> -		writel(BIT(gpp_offset), community->regs + is_offset);
> -
> -		value = readl(community->regs + community->ie_offset + gpp * 4);
> -		value |= BIT(gpp_offset);
> -		writel(value, community->regs + community->ie_offset + gpp * 4);
> -		raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> -	}
> -}
> -
>  static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
>  {
>  	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> @@ -963,6 +934,11 @@ static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
>  		reg = community->regs + community->ie_offset + gpp * 4;
>  
>  		raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> +		/* Clear interrupt status first to avoid unexpected interrupt */

> +		if (!mask)

Can we do this unconditionally?

> +			writel(BIT(gpp_offset), community->regs + community->is_offset + gpp * 4);

I would rather prefer to follow the below pattern, like

reg = ...;
writel(..., reg);

or, to decrease calculus under spin lock, something like

reg = ->regs + gpp * 4;

writel(..., reg + is_offset);

readl(reg + ie_offset);

etc.

> +
>  		value = readl(reg);
>  		if (mask)
>  			value &= ~BIT(gpp_offset);
> @@ -1106,7 +1082,6 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
>  
>  static struct irq_chip intel_gpio_irqchip = {
>  	.name = "intel-gpio",

> -	.irq_enable = intel_gpio_irq_enable,

Is it possible scenario when IRQ enable is called, but not masking callbacks?
For _AEI or GPE?

>  	.irq_ack = intel_gpio_irq_ack,
>  	.irq_mask = intel_gpio_irq_mask,
>  	.irq_unmask = intel_gpio_irq_unmask,

-- 
With Best Regards,
Andy Shevchenko

  parent reply	other threads:[~2019-04-26 21:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-22  4:45 [PATCH] pinctrl: intel: Clear interrupt status in unmask callback Kai-Heng Feng
     [not found] ` <Ld5HCy5--3-1@tutanota.com>
2019-04-23  4:57   ` Kai-Heng Feng
     [not found]     ` <Ld8QGex--3-1@tutanota.com>
2019-04-23  9:08       ` Mika Westerberg
     [not found]         ` <Ld8ZLG1--3-1@tutanota.com>
2019-04-23  9:47           ` Kai-Heng Feng
     [not found]             ` <Ld9SLAo--3-1@tutanota.com>
2019-04-25  5:16               ` Kai Heng Feng
2019-04-25  9:11 ` Mika Westerberg
2019-04-26 21:47 ` Andy Shevchenko [this message]
2019-04-29  9:16   ` Kai-Heng Feng
2019-04-29 13:13     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190426214758.GC9224@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=hotwater438@tutanota.com \
    --cc=kai.heng.feng@canonical.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.