From: Jeff Kletsky <lede@allycomm.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
Date: Tue, 14 May 2019 14:53:15 -0700 [thread overview]
Message-ID: <20190514215315.19228-4-lede@allycomm.com> (raw)
In-Reply-To: <20190514215315.19228-1-lede@allycomm.com>
From: Jeff Kletsky <git-commits@allycomm.com>
The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.
This support is contingent on previous commits to:
* Add support for two-byte device IDs
* Add #define-s for page-read ops with three-byte addresses
http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
---
drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
1 file changed, 64 insertions(+), 15 deletions(-)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index 0b49d8264bef..d6497ac4c5d8 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
#include <linux/mtd/spinand.h>
#define SPINAND_MFR_GIGADEVICE 0xC8
+
#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
#define GD5FXGQ4UEXXG_REG_STATUS2 0xf0
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
static SPINAND_OP_VARIANTS(write_cache_variants,
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+ .ecc = gd5fxgq4xa_ooblayout_ecc,
+ .free = gd5fxgq4xa_ooblayout_free,
+};
+
static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
return 0;
}
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+ .ecc = gd5fxgq4_variant2_ooblayout_ecc,
+ .free = gd5fxgq4_variant2_ooblayout_free,
+};
+
static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
- .ecc = gd5fxgq4xa_ooblayout_ecc,
- .free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+ case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+ return 0;
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
- .ecc = gd5fxgq4uexxg_ooblayout_ecc,
- .free = gd5fxgq4uexxg_ooblayout_free,
-};
+ case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+ return 3;
+
+ case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+
+ default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+ return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+ }
+
+ return -EINVAL;
+}
static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+ SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+ gd5fxgq4ufxxg_ecc_get_status)),
};
static int gigadevice_spinand_detect(struct spinand_device *spinand)
{
u8 *id = spinand->id.data;
+ u16 did;
int ret;
/*
- * For GD NANDs, There is an address byte needed to shift in before IDs
- * are read out, so the first byte in raw_id is dummy.
+ * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+ * Later (F) devices return [MID][DID1][DID2]
*/
- if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+ if (id[0] == SPINAND_MFR_GIGADEVICE)
+ did = (id[1] << 8) + id[2];
+ else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+ did = id[2];
+ else
return 0;
ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
ARRAY_SIZE(gigadevice_spinand_table),
- id[2]);
+ did);
if (ret)
return ret;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Jeff Kletsky <lede@allycomm.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
Date: Tue, 14 May 2019 14:53:15 -0700 [thread overview]
Message-ID: <20190514215315.19228-4-lede@allycomm.com> (raw)
In-Reply-To: <20190514215315.19228-1-lede@allycomm.com>
From: Jeff Kletsky <git-commits@allycomm.com>
The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.
This support is contingent on previous commits to:
* Add support for two-byte device IDs
* Add #define-s for page-read ops with three-byte addresses
http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
---
drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
1 file changed, 64 insertions(+), 15 deletions(-)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index 0b49d8264bef..d6497ac4c5d8 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
#include <linux/mtd/spinand.h>
#define SPINAND_MFR_GIGADEVICE 0xC8
+
#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
#define GD5FXGQ4UEXXG_REG_STATUS2 0xf0
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
static SPINAND_OP_VARIANTS(write_cache_variants,
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+ .ecc = gd5fxgq4xa_ooblayout_ecc,
+ .free = gd5fxgq4xa_ooblayout_free,
+};
+
static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
return 0;
}
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+ .ecc = gd5fxgq4_variant2_ooblayout_ecc,
+ .free = gd5fxgq4_variant2_ooblayout_free,
+};
+
static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
- .ecc = gd5fxgq4xa_ooblayout_ecc,
- .free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+ case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+ return 0;
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
- .ecc = gd5fxgq4uexxg_ooblayout_ecc,
- .free = gd5fxgq4uexxg_ooblayout_free,
-};
+ case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+ return 3;
+
+ case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+
+ default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+ return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+ }
+
+ return -EINVAL;
+}
static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+ SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+ gd5fxgq4ufxxg_ecc_get_status)),
};
static int gigadevice_spinand_detect(struct spinand_device *spinand)
{
u8 *id = spinand->id.data;
+ u16 did;
int ret;
/*
- * For GD NANDs, There is an address byte needed to shift in before IDs
- * are read out, so the first byte in raw_id is dummy.
+ * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+ * Later (F) devices return [MID][DID1][DID2]
*/
- if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+ if (id[0] == SPINAND_MFR_GIGADEVICE)
+ did = (id[1] << 8) + id[2];
+ else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+ did = id[2];
+ else
return 0;
ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
ARRAY_SIZE(gigadevice_spinand_table),
- id[2]);
+ did);
if (ret)
return ret;
--
2.20.1
next prev parent reply other threads:[~2019-05-14 21:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190514215315.19228-1-lede@allycomm.com>
2019-05-14 21:53 ` [PATCH v2 1/3] mtd: spinand: Add #define-s for page-read ops with three-byte addresses Jeff Kletsky
2019-05-14 21:53 ` Jeff Kletsky
2019-05-15 6:17 ` Marek Vasut
2019-05-15 6:17 ` Marek Vasut
2019-05-15 6:49 ` Schrempf Frieder
2019-05-15 6:49 ` Schrempf Frieder
2019-05-19 20:27 ` Jeff Kletsky
2019-05-19 20:27 ` Jeff Kletsky
2019-05-20 12:16 ` Miquel Raynal
2019-05-20 12:16 ` Miquel Raynal
2019-05-15 6:51 ` Schrempf Frieder
2019-05-15 6:51 ` Schrempf Frieder
2019-05-14 21:53 ` [PATCH v2 2/3] mtd: spinand: Add support for two-byte device IDs Jeff Kletsky
2019-05-14 21:53 ` Jeff Kletsky
2019-05-15 6:52 ` Schrempf Frieder
2019-05-15 6:52 ` Schrempf Frieder
2019-05-14 21:53 ` Jeff Kletsky [this message]
2019-05-14 21:53 ` [PATCH v2 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2019-05-15 6:53 ` Schrempf Frieder
2019-05-15 6:53 ` Schrempf Frieder
2019-05-20 19:53 ` Jeff Kletsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190514215315.19228-4-lede@allycomm.com \
--to=lede@allycomm.com \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.