All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Ran Wang <ran.wang_1@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Leo Li <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] arm64: dts: ls1028a: Fix CPU idle fail.
Date: Fri, 17 May 2019 09:32:53 +0800	[thread overview]
Message-ID: <20190517013252.GV15856@dragon> (raw)
In-Reply-To: <20190507074454.41589-1-ran.wang_1@nxp.com>

On Tue, May 07, 2019 at 07:43:37AM +0000, Ran Wang wrote:
> PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to
> indicate CPU State Type: 0 for standby, 1 for power down. In this
> case, we want to select standby for CPU idle feature. But current
> setting wrongly select power down and cause CPU SUSPEND fail every
> time. Need this fix.
> 
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Do we need a Fixes tag for this?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   18 +++++++++---------
>  1 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index b045812..bf7f845 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -28,7 +28,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
>  
>  		cpu1: cpu@1 {
> @@ -38,7 +38,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
>  
>  		l2: l2-cache {
> @@ -53,13 +53,13 @@
>  		 */
>  		entry-method = "arm,psci";
>  
> -		CPU_PH20: cpu-ph20 {
> -			compatible = "arm,idle-state";
> -			idle-state-name = "PH20";
> -			arm,psci-suspend-param = <0x00010000>;
> -			entry-latency-us = <1000>;
> -			exit-latency-us = <1000>;
> -			min-residency-us = <3000>;
> +		CPU_PW20: cpu-pw20 {
> +			  compatible = "arm,idle-state";
> +			  idle-state-name = "PW20";
> +			  arm,psci-suspend-param = <0x0>;
> +			  entry-latency-us = <2000>;
> +			  exit-latency-us = <2000>;
> +			  min-residency-us = <6000>;
>  		};
>  	};
>  
> -- 
> 1.7.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Ran Wang <ran.wang_1@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Leo Li <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] arm64: dts: ls1028a: Fix CPU idle fail.
Date: Fri, 17 May 2019 09:32:53 +0800	[thread overview]
Message-ID: <20190517013252.GV15856@dragon> (raw)
In-Reply-To: <20190507074454.41589-1-ran.wang_1@nxp.com>

On Tue, May 07, 2019 at 07:43:37AM +0000, Ran Wang wrote:
> PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to
> indicate CPU State Type: 0 for standby, 1 for power down. In this
> case, we want to select standby for CPU idle feature. But current
> setting wrongly select power down and cause CPU SUSPEND fail every
> time. Need this fix.
> 
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Do we need a Fixes tag for this?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   18 +++++++++---------
>  1 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index b045812..bf7f845 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -28,7 +28,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
>  
>  		cpu1: cpu@1 {
> @@ -38,7 +38,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
>  
>  		l2: l2-cache {
> @@ -53,13 +53,13 @@
>  		 */
>  		entry-method = "arm,psci";
>  
> -		CPU_PH20: cpu-ph20 {
> -			compatible = "arm,idle-state";
> -			idle-state-name = "PH20";
> -			arm,psci-suspend-param = <0x00010000>;
> -			entry-latency-us = <1000>;
> -			exit-latency-us = <1000>;
> -			min-residency-us = <3000>;
> +		CPU_PW20: cpu-pw20 {
> +			  compatible = "arm,idle-state";
> +			  idle-state-name = "PW20";
> +			  arm,psci-suspend-param = <0x0>;
> +			  entry-latency-us = <2000>;
> +			  exit-latency-us = <2000>;
> +			  min-residency-us = <6000>;
>  		};
>  	};
>  
> -- 
> 1.7.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Ran Wang <ran.wang_1@nxp.com>
Cc: Leo Li <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: ls1028a: Fix CPU idle fail.
Date: Fri, 17 May 2019 09:32:53 +0800	[thread overview]
Message-ID: <20190517013252.GV15856@dragon> (raw)
In-Reply-To: <20190507074454.41589-1-ran.wang_1@nxp.com>

On Tue, May 07, 2019 at 07:43:37AM +0000, Ran Wang wrote:
> PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to
> indicate CPU State Type: 0 for standby, 1 for power down. In this
> case, we want to select standby for CPU idle feature. But current
> setting wrongly select power down and cause CPU SUSPEND fail every
> time. Need this fix.
> 
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Do we need a Fixes tag for this?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   18 +++++++++---------
>  1 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index b045812..bf7f845 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -28,7 +28,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
>  
>  		cpu1: cpu@1 {
> @@ -38,7 +38,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
>  
>  		l2: l2-cache {
> @@ -53,13 +53,13 @@
>  		 */
>  		entry-method = "arm,psci";
>  
> -		CPU_PH20: cpu-ph20 {
> -			compatible = "arm,idle-state";
> -			idle-state-name = "PH20";
> -			arm,psci-suspend-param = <0x00010000>;
> -			entry-latency-us = <1000>;
> -			exit-latency-us = <1000>;
> -			min-residency-us = <3000>;
> +		CPU_PW20: cpu-pw20 {
> +			  compatible = "arm,idle-state";
> +			  idle-state-name = "PW20";
> +			  arm,psci-suspend-param = <0x0>;
> +			  entry-latency-us = <2000>;
> +			  exit-latency-us = <2000>;
> +			  min-residency-us = <6000>;
>  		};
>  	};
>  
> -- 
> 1.7.1
> 

  reply	other threads:[~2019-05-17  1:33 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-07  7:43 [PATCH] arm64: dts: ls1028a: Fix CPU idle fail Ran Wang
2019-05-07  7:43 ` Ran Wang
2019-05-17  1:32 ` Shawn Guo [this message]
2019-05-17  1:32   ` Shawn Guo
2019-05-17  1:32   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190517013252.GV15856@dragon \
    --to=shawnguo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ran.wang_1@nxp.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.