From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] proc: use typeof_member() macro
Date: Wed, 29 May 2019 22:11:10 +0300 [thread overview]
Message-ID: <20190529191110.GB5703@avx2> (raw)
In-Reply-To: <20190529190720.GA5703@avx2>
Don't repeat function signatures twice.
This is a kind-of-precursor for "struct proc_ops".
Note:
typeof(pde->proc_fops->...) ...;
can't be used because ->proc_fops is "const struct file_operations *".
"const" prevents assignment down the code and it can't be deleted
in the type system.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
Note 2: 100% false positives with checkpatch.pl :^)
fs/proc/inode.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -200,7 +200,8 @@ static loff_t proc_reg_llseek(struct file *file, loff_t offset, int whence)
struct proc_dir_entry *pde = PDE(file_inode(file));
loff_t rv = -EINVAL;
if (use_pde(pde)) {
- loff_t (*llseek)(struct file *, loff_t, int);
+ typeof_member(struct file_operations, llseek) llseek;
+
llseek = pde->proc_fops->llseek;
if (!llseek)
llseek = default_llseek;
@@ -212,10 +213,11 @@ static loff_t proc_reg_llseek(struct file *file, loff_t offset, int whence)
static ssize_t proc_reg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
- ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
struct proc_dir_entry *pde = PDE(file_inode(file));
ssize_t rv = -EIO;
if (use_pde(pde)) {
+ typeof_member(struct file_operations, read) read;
+
read = pde->proc_fops->read;
if (read)
rv = read(file, buf, count, ppos);
@@ -226,10 +228,11 @@ static ssize_t proc_reg_read(struct file *file, char __user *buf, size_t count,
static ssize_t proc_reg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
struct proc_dir_entry *pde = PDE(file_inode(file));
ssize_t rv = -EIO;
if (use_pde(pde)) {
+ typeof_member(struct file_operations, write) write;
+
write = pde->proc_fops->write;
if (write)
rv = write(file, buf, count, ppos);
@@ -242,8 +245,9 @@ static __poll_t proc_reg_poll(struct file *file, struct poll_table_struct *pts)
{
struct proc_dir_entry *pde = PDE(file_inode(file));
__poll_t rv = DEFAULT_POLLMASK;
- __poll_t (*poll)(struct file *, struct poll_table_struct *);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, poll) poll;
+
poll = pde->proc_fops->poll;
if (poll)
rv = poll(file, pts);
@@ -256,8 +260,9 @@ static long proc_reg_unlocked_ioctl(struct file *file, unsigned int cmd, unsigne
{
struct proc_dir_entry *pde = PDE(file_inode(file));
long rv = -ENOTTY;
- long (*ioctl)(struct file *, unsigned int, unsigned long);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, unlocked_ioctl) ioctl;
+
ioctl = pde->proc_fops->unlocked_ioctl;
if (ioctl)
rv = ioctl(file, cmd, arg);
@@ -271,8 +276,9 @@ static long proc_reg_compat_ioctl(struct file *file, unsigned int cmd, unsigned
{
struct proc_dir_entry *pde = PDE(file_inode(file));
long rv = -ENOTTY;
- long (*compat_ioctl)(struct file *, unsigned int, unsigned long);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, compat_ioctl) compat_ioctl;
+
compat_ioctl = pde->proc_fops->compat_ioctl;
if (compat_ioctl)
rv = compat_ioctl(file, cmd, arg);
@@ -286,8 +292,9 @@ static int proc_reg_mmap(struct file *file, struct vm_area_struct *vma)
{
struct proc_dir_entry *pde = PDE(file_inode(file));
int rv = -EIO;
- int (*mmap)(struct file *, struct vm_area_struct *);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, mmap) mmap;
+
mmap = pde->proc_fops->mmap;
if (mmap)
rv = mmap(file, vma);
@@ -305,7 +312,7 @@ proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr,
unsigned long rv = -EIO;
if (use_pde(pde)) {
- typeof(proc_reg_get_unmapped_area) *get_area;
+ typeof_member(struct file_operations, get_unmapped_area) get_area;
get_area = pde->proc_fops->get_unmapped_area;
#ifdef CONFIG_MMU
@@ -326,8 +333,8 @@ static int proc_reg_open(struct inode *inode, struct file *file)
{
struct proc_dir_entry *pde = PDE(inode);
int rv = 0;
- int (*open)(struct inode *, struct file *);
- int (*release)(struct inode *, struct file *);
+ typeof_member(struct file_operations, open) open;
+ typeof_member(struct file_operations, release) release;
struct pde_opener *pdeo;
/*
next prev parent reply other threads:[~2019-05-29 19:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 19:07 [PATCH 1/2] add typeof_member() macro Alexey Dobriyan
2019-05-29 19:11 ` Alexey Dobriyan [this message]
2019-05-29 22:33 ` [PATCH 2/2] proc: use " Andrew Morton
2019-05-30 11:37 ` [PATCH 1/2] add " David Laight
2019-05-30 11:53 ` Joe Perches
2019-05-30 19:57 ` Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190529191110.GB5703@avx2 \
--to=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.