[PATCH v4 4/9] ASoC: sun4i-i2s: Reduce quirks for sun8i-h3

[codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org]

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

We have a number of flags used to identify the functionality
of the IP block found on the sun8i-h3 and later devices. As it
is only neccessary to identify this new block then replace
these flags with just one.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index e2961d8f6e8c..329883750d6f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -119,10 +119,7 @@
  *
  * @has_reset: SoC needs reset deasserted.
  * @has_slave_select_bit: SoC has a bit to enable slave mode.
- * @has_fmt_set_lrck_period: SoC requires lrclk period to be set.
- * @has_chcfg: tx and rx slot number need to be set.
- * @has_chsel_tx_chen: SoC requires that the tx channels are enabled.
- * @has_chsel_offset: SoC uses offset for selecting dai operational mode.
+ * @is_h3_i2s_based: This block is similiar to what is found on the h3.
  * @reg_offset_txdata: offset of the tx fifo.
  * @sun4i_i2s_regmap: regmap config to use.
  * @mclk_offset: Value by which mclkdiv needs to be adjusted.
@@ -143,10 +140,7 @@
 struct sun4i_i2s_quirks {
 	bool				has_reset;
 	bool				has_slave_select_bit;
-	bool				has_fmt_set_lrck_period;
-	bool				has_chcfg;
-	bool				has_chsel_tx_chen;
-	bool				has_chsel_offset;
+	bool				is_h3_i2s_based;
 	unsigned int			reg_offset_txdata;	/* TX FIFO */
 	const struct regmap_config	*sun4i_i2s_regmap;
 	unsigned int			mclk_offset;
@@ -340,7 +334,7 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 	regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
 
 	/* Set sync period */
-	if (i2s->variant->has_fmt_set_lrck_period)
+	if (i2s->variant->is_h3_i2s_based)
 		regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
 				   SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
 				   SUN8I_I2S_FMT0_LRCK_PERIOD(32));
@@ -366,7 +360,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	if (i2s->variant->has_chcfg) {
+	if (i2s->variant->is_h3_i2s_based) {
 		regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
 				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
 				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
@@ -386,7 +380,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	regmap_field_write(i2s->field_rxchansel,
 			   SUN4I_I2S_CHAN_SEL(params_channels(params)));
 
-	if (i2s->variant->has_chsel_tx_chen)
+	if (i2s->variant->is_h3_i2s_based)
 		regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
 				   SUN8I_I2S_TX_CHAN_EN_MASK,
 				   SUN8I_I2S_TX_CHAN_EN(channels));
@@ -449,7 +443,7 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
-	if (i2s->variant->has_chsel_offset) {
+	if (i2s->variant->is_h3_i2s_based) {
 		/*
 		 * offset being set indicates that we're connected to an i2s
 		 * device, however offset is only used on the sun8i block and
@@ -942,10 +936,7 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
 	.mclk_offset		= 1,
 	.bclk_offset		= 2,
 	.fmt_offset		= 3,
-	.has_fmt_set_lrck_period = true,
-	.has_chcfg		= true,
-	.has_chsel_tx_chen	= true,
-	.has_chsel_offset	= true,
+	.is_h3_i2s_based     = true,
 	.field_clkdiv_mclk_en	= REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 8, 8),
 	.field_fmt_wss		= REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 2),
 	.field_fmt_sr		= REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 6),
-- 
2.21.0