From: Vladimir Oltean <olteanv@gmail.com>
To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch,
davem@davemloft.net, richardcochran@gmail.com,
john.stultz@linaro.org, tglx@linutronix.de, sboyd@kernel.org
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH v3 net-next 09/17] net: dsa: sja1105: Add logic for TX timestamping
Date: Tue, 4 Jun 2019 20:07:48 +0300 [thread overview]
Message-ID: <20190604170756.14338-10-olteanv@gmail.com> (raw)
In-Reply-To: <20190604170756.14338-1-olteanv@gmail.com>
On TX, timestamping is performed synchronously from the
port_deferred_xmit worker thread.
In management routes, the switch is requested to take egress timestamps
(again partial), which are reconstructed and appended to a clone of the
skb that was just sent. The cloning is done by DSA and we retrieve the
pointer from the structure that DSA keeps in skb->cb.
Then these clones are enqueued to the socket's error queue for
application-level processing.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
Changes in v3:
Split from previous 09/10 patch (no functional changes).
Changes in v2:
None.
drivers/net/dsa/sja1105/sja1105.h | 10 +++
drivers/net/dsa/sja1105/sja1105_main.c | 55 ++++++++++++-
drivers/net/dsa/sja1105/sja1105_ptp.c | 104 +++++++++++++++++++++++++
drivers/net/dsa/sja1105/sja1105_ptp.h | 17 ++++
drivers/net/dsa/sja1105/sja1105_spi.c | 14 ++++
include/linux/dsa/sja1105.h | 1 +
6 files changed, 199 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 3c6296203c21..5a4f83a3417b 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -33,6 +33,7 @@ struct sja1105_regs {
u64 ptpclk;
u64 ptpclkrate;
u64 ptptsclk;
+ u64 ptpegr_ts[SJA1105_NUM_PORTS];
u64 pad_mii_tx[SJA1105_NUM_PORTS];
u64 cgu_idiv[SJA1105_NUM_PORTS];
u64 rgmii_pad_mii_tx[SJA1105_NUM_PORTS];
@@ -56,6 +57,15 @@ struct sja1105_info {
* switch core and device_id)
*/
u64 part_no;
+ /* E/T and P/Q/R/S have partial timestamps of different sizes.
+ * They must be reconstructed on both families anyway to get the full
+ * 64-bit values back.
+ */
+ int ptp_ts_bits;
+ /* Also SPI commands are of different sizes to retrieve
+ * the egress timestamps.
+ */
+ int ptpegr_ts_bytes;
const struct sja1105_dynamic_table_ops *dyn_ops;
const struct sja1105_table_ops *static_ops;
const struct sja1105_regs *regs;
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 5ed2adbf3505..45c65e77b61d 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1565,7 +1565,7 @@ static int sja1105_setup(struct dsa_switch *ds)
}
static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot,
- struct sk_buff *skb)
+ struct sk_buff *skb, bool takets)
{
struct sja1105_mgmt_entry mgmt_route = {0};
struct sja1105_private *priv = ds->priv;
@@ -1578,6 +1578,8 @@ static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot,
mgmt_route.macaddr = ether_addr_to_u64(hdr->h_dest);
mgmt_route.destports = BIT(port);
mgmt_route.enfport = 1;
+ mgmt_route.tsreg = 0;
+ mgmt_route.takets = takets;
rc = sja1105_dynamic_config_write(priv, BLK_IDX_MGMT_ROUTE,
slot, &mgmt_route, true);
@@ -1629,7 +1631,11 @@ static netdev_tx_t sja1105_port_deferred_xmit(struct dsa_switch *ds, int port,
{
struct sja1105_private *priv = ds->priv;
struct sja1105_port *sp = &priv->ports[port];
+ struct skb_shared_hwtstamps shwt = {0};
int slot = sp->mgmt_slot;
+ struct sk_buff *clone;
+ u64 now, ts;
+ int rc;
/* The tragic fact about the switch having 4x2 slots for installing
* management routes is that all of them except one are actually
@@ -1647,8 +1653,36 @@ static netdev_tx_t sja1105_port_deferred_xmit(struct dsa_switch *ds, int port,
*/
mutex_lock(&priv->mgmt_lock);
- sja1105_mgmt_xmit(ds, port, slot, skb);
+ /* The clone, if there, was made by dsa_skb_tx_timestamp */
+ clone = DSA_SKB_CB(skb)->clone;
+
+ sja1105_mgmt_xmit(ds, port, slot, skb, !!clone);
+
+ if (!clone)
+ goto out;
+
+ skb_shinfo(clone)->tx_flags |= SKBTX_IN_PROGRESS;
+
+ mutex_lock(&priv->ptp_lock);
+
+ now = priv->tstamp_cc.read(&priv->tstamp_cc);
+
+ rc = sja1105_ptpegr_ts_poll(priv, slot, &ts);
+ if (rc < 0) {
+ dev_err(ds->dev, "xmit: timed out polling for tstamp\n");
+ kfree_skb(clone);
+ goto out_unlock_ptp;
+ }
+
+ ts = sja1105_tstamp_reconstruct(priv, now, ts);
+ ts = timecounter_cyc2time(&priv->tstamp_tc, ts);
+ shwt.hwtstamp = ns_to_ktime(ts);
+ skb_complete_tx_timestamp(clone, &shwt);
+
+out_unlock_ptp:
+ mutex_unlock(&priv->ptp_lock);
+out:
mutex_unlock(&priv->mgmt_lock);
return NETDEV_TX_OK;
}
@@ -1677,6 +1711,22 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
return sja1105_static_config_reload(priv);
}
+/* Called from dsa_skb_tx_timestamp. This callback is just to make DSA clone
+ * the skb and have it available in DSA_SKB_CB in the .port_deferred_xmit
+ * callback, where we will timestamp it synchronously.
+ */
+bool sja1105_port_txtstamp(struct dsa_switch *ds, int port,
+ struct sk_buff *skb, unsigned int type)
+{
+ struct sja1105_private *priv = ds->priv;
+ struct sja1105_port *sp = &priv->ports[port];
+
+ if (!sp->hwts_tx_en)
+ return false;
+
+ return true;
+}
+
static const struct dsa_switch_ops sja1105_switch_ops = {
.get_tag_protocol = sja1105_get_tag_protocol,
.setup = sja1105_setup,
@@ -1701,6 +1751,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
.port_mdb_add = sja1105_mdb_add,
.port_mdb_del = sja1105_mdb_del,
.port_deferred_xmit = sja1105_port_deferred_xmit,
+ .port_txtstamp = sja1105_port_txtstamp,
};
static int sja1105_check_device_id(struct sja1105_private *priv)
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c
index 5ffc985ad89a..1fce413a3fb4 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.c
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.c
@@ -110,6 +110,110 @@ int sja1105pqrs_ptp_cmd(const void *ctx, const void *data)
buf, SJA1105_SIZE_PTP_CMD);
}
+/* The switch returns partial timestamps (24 bits for SJA1105 E/T, which wrap
+ * around in 0.135 seconds, and 32 bits for P/Q/R/S, wrapping around in 34.35
+ * seconds).
+ *
+ * This receives the RX or TX MAC timestamps, provided by hardware as
+ * the lower bits of the cycle counter, sampled at the time the timestamp was
+ * collected.
+ *
+ * To reconstruct into a full 64-bit-wide timestamp, the cycle counter is
+ * read and the high-order bits are filled in.
+ *
+ * Must be called within one wraparound period of the partial timestamp since
+ * it was generated by the MAC.
+ */
+u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, u64 now,
+ u64 ts_partial)
+{
+ u64 partial_tstamp_mask = CYCLECOUNTER_MASK(priv->info->ptp_ts_bits);
+ u64 ts_reconstructed;
+
+ ts_reconstructed = (now & ~partial_tstamp_mask) | ts_partial;
+
+ /* Check lower bits of current cycle counter against the timestamp.
+ * If the current cycle counter is lower than the partial timestamp,
+ * then wraparound surely occurred and must be accounted for.
+ */
+ if ((now & partial_tstamp_mask) <= ts_partial)
+ ts_reconstructed -= (partial_tstamp_mask + 1);
+
+ return ts_reconstructed;
+}
+
+/* Reads the SPI interface for an egress timestamp generated by the switch
+ * for frames sent using management routes.
+ *
+ * SJA1105 E/T layout of the 4-byte SPI payload:
+ *
+ * 31 23 15 7 0
+ * | | | | |
+ * +-----+-----+-----+ ^
+ * ^ |
+ * | |
+ * 24-bit timestamp Update bit
+ *
+ *
+ * SJA1105 P/Q/R/S layout of the 8-byte SPI payload:
+ *
+ * 31 23 15 7 0 63 55 47 39 32
+ * | | | | | | | | | |
+ * ^ +-----+-----+-----+-----+
+ * | ^
+ * | |
+ * Update bit 32-bit timestamp
+ *
+ * Notice that the update bit is in the same place.
+ * To have common code for E/T and P/Q/R/S for reading the timestamp,
+ * we need to juggle with the offset and the bit indices.
+ */
+int sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts)
+{
+ const struct sja1105_regs *regs = priv->info->regs;
+ int tstamp_bit_start, tstamp_bit_end;
+ int timeout = 10;
+ u8 packed_buf[8];
+ u64 update;
+ int rc;
+
+ do {
+ rc = sja1105_spi_send_packed_buf(priv, SPI_READ,
+ regs->ptpegr_ts[port],
+ packed_buf,
+ priv->info->ptpegr_ts_bytes);
+ if (rc < 0)
+ return rc;
+
+ sja1105_unpack(packed_buf, &update, 0, 0,
+ priv->info->ptpegr_ts_bytes);
+ if (update)
+ break;
+
+ usleep_range(10, 50);
+ } while (--timeout);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ /* Point the end bit to the second 32-bit word on P/Q/R/S,
+ * no-op on E/T.
+ */
+ tstamp_bit_end = (priv->info->ptpegr_ts_bytes - 4) * 8;
+ /* Shift the 24-bit timestamp on E/T to be collected from 31:8.
+ * No-op on P/Q/R/S.
+ */
+ tstamp_bit_end += 32 - priv->info->ptp_ts_bits;
+ tstamp_bit_start = tstamp_bit_end + priv->info->ptp_ts_bits - 1;
+
+ *ts = 0;
+
+ sja1105_unpack(packed_buf, ts, tstamp_bit_start, tstamp_bit_end,
+ priv->info->ptpegr_ts_bytes);
+
+ return 0;
+}
+
int sja1105_ptp_reset(struct sja1105_private *priv)
{
struct dsa_switch *ds = priv->ds;
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h
index 137ffbb0a233..af456b0a4d27 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.h
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.h
@@ -10,6 +10,8 @@ int sja1105_ptp_clock_register(struct sja1105_private *priv);
void sja1105_ptp_clock_unregister(struct sja1105_private *priv);
+int sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts);
+
int sja1105et_ptp_cmd(const void *ctx, const void *data);
int sja1105pqrs_ptp_cmd(const void *ctx, const void *data);
@@ -17,6 +19,9 @@ int sja1105pqrs_ptp_cmd(const void *ctx, const void *data);
int sja1105_get_ts_info(struct dsa_switch *ds, int port,
struct ethtool_ts_info *ts);
+u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, u64 now,
+ u64 ts_partial);
+
int sja1105_ptp_reset(struct sja1105_private *priv);
#else
@@ -31,6 +36,18 @@ static inline void sja1105_ptp_clock_unregister(struct sja1105_private *priv)
return;
}
+static inline int
+sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts)
+{
+ return 0;
+}
+
+static inline u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv,
+ u64 now, u64 ts_partial)
+{
+ return 0;
+}
+
static inline int sja1105_ptp_reset(struct sja1105_private *priv)
{
return 0;
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index d226996881b8..a71b16c5ae5d 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -512,6 +512,7 @@ static struct sja1105_regs sja1105et_regs = {
.rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032},
.rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
.rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
+ .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8},
.ptp_control = 0x17,
.ptpclk = 0x18, /* Spans 0x18 to 0x19 */
.ptpclkrate = 0x1A,
@@ -542,6 +543,7 @@ static struct sja1105_regs sja1105pqrs_regs = {
.rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D},
.rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
.qlevel = {0x604, 0x614, 0x624, 0x634, 0x644},
+ .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0},
.ptp_control = 0x18,
.ptpclk = 0x19,
.ptpclkrate = 0x1B,
@@ -553,6 +555,8 @@ struct sja1105_info sja1105e_info = {
.part_no = SJA1105ET_PART_NO,
.static_ops = sja1105e_table_ops,
.dyn_ops = sja1105et_dyn_ops,
+ .ptp_ts_bits = 24,
+ .ptpegr_ts_bytes = 4,
.reset_cmd = sja1105et_reset_cmd,
.fdb_add_cmd = sja1105et_fdb_add,
.fdb_del_cmd = sja1105et_fdb_del,
@@ -565,6 +569,8 @@ struct sja1105_info sja1105t_info = {
.part_no = SJA1105ET_PART_NO,
.static_ops = sja1105t_table_ops,
.dyn_ops = sja1105et_dyn_ops,
+ .ptp_ts_bits = 24,
+ .ptpegr_ts_bytes = 4,
.reset_cmd = sja1105et_reset_cmd,
.fdb_add_cmd = sja1105et_fdb_add,
.fdb_del_cmd = sja1105et_fdb_del,
@@ -577,6 +583,8 @@ struct sja1105_info sja1105p_info = {
.part_no = SJA1105P_PART_NO,
.static_ops = sja1105p_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
+ .ptp_ts_bits = 32,
+ .ptpegr_ts_bytes = 8,
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
@@ -589,6 +597,8 @@ struct sja1105_info sja1105q_info = {
.part_no = SJA1105Q_PART_NO,
.static_ops = sja1105q_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
+ .ptp_ts_bits = 32,
+ .ptpegr_ts_bytes = 8,
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
@@ -601,6 +611,8 @@ struct sja1105_info sja1105r_info = {
.part_no = SJA1105R_PART_NO,
.static_ops = sja1105r_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
+ .ptp_ts_bits = 32,
+ .ptpegr_ts_bytes = 8,
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
@@ -614,6 +626,8 @@ struct sja1105_info sja1105s_info = {
.static_ops = sja1105s_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.regs = &sja1105pqrs_regs,
+ .ptp_ts_bits = 32,
+ .ptpegr_ts_bytes = 8,
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h
index f3237afed35a..f5d5f7823da6 100644
--- a/include/linux/dsa/sja1105.h
+++ b/include/linux/dsa/sja1105.h
@@ -22,6 +22,7 @@
struct sja1105_port {
struct dsa_port *dp;
+ bool hwts_tx_en;
int mgmt_slot;
};
--
2.17.1
next prev parent reply other threads:[~2019-06-04 17:09 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 17:07 [PATCH v3 net-next 00/17] PTP support for the SJA1105 DSA driver Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 01/17] net: dsa: Keep a pointer to the skb clone for TX timestamping Vladimir Oltean
2019-06-04 20:31 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 02/17] net: dsa: Add teardown callback for drivers Vladimir Oltean
2019-06-04 18:15 ` Andrew Lunn
2019-06-04 20:32 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 03/17] net: dsa: tag_8021q: Create helper function for removing VLAN header Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 04/17] net: dsa: sja1105: Move sja1105_change_tpid into sja1105_vlan_filtering Vladimir Oltean
2019-06-04 20:58 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 05/17] net: dsa: sja1105: Reverse TPID and TPID2 Vladimir Oltean
2019-06-04 20:33 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 06/17] net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode Vladimir Oltean
2019-06-04 20:35 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 07/17] net: dsa: sja1105: Add support for the PTP clock Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 08/17] net: dsa: sja1105: Move sja1105_is_link_local to include/linux Vladimir Oltean
2019-06-04 20:35 ` Florian Fainelli
2019-06-04 17:07 ` Vladimir Oltean [this message]
2019-06-04 17:07 ` [PATCH v3 net-next 10/17] net: dsa: sja1105: Build a minimal understanding of meta frames Vladimir Oltean
2019-06-04 21:00 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 11/17] net: dsa: sja1105: Add support for the AVB Parameters Table Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 12/17] net: dsa: sja1105: Make sja1105_is_link_local not match meta frames Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 13/17] net: dsa: sja1105: Receive and decode " Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 14/17] net: dsa: sja1105: Add a global sja1105_tagger_data structure Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 15/17] net: dsa: sja1105: Increase priority of CPU-trapped frames Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 16/17] net: dsa: sja1105: Add a state machine for RX timestamping Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 17/17] net: dsa: sja1105: Expose PTP timestamping ioctls to userspace Vladimir Oltean
2019-06-05 3:22 ` [PATCH v3 net-next 00/17] PTP support for the SJA1105 DSA driver David Miller
2019-06-05 9:13 ` Vladimir Oltean
2019-06-05 11:33 ` Vladimir Oltean
2019-06-05 17:45 ` Richard Cochran
2019-06-05 17:50 ` Vladimir Oltean
2019-06-05 17:52 ` Vladimir Oltean
2019-06-05 18:08 ` Vladimir Oltean
2019-06-06 3:11 ` Richard Cochran
2019-06-06 13:40 ` Vladimir Oltean
2019-06-07 3:32 ` Richard Cochran
2019-06-07 9:43 ` Vladimir Oltean
2019-06-05 18:44 ` David Miller
2019-06-07 19:15 ` David Miller
2019-06-07 19:38 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604170756.14338-10-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.