From: Vladimir Oltean <olteanv@gmail.com>
To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch,
davem@davemloft.net, richardcochran@gmail.com,
john.stultz@linaro.org, tglx@linutronix.de, sboyd@kernel.org
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH v3 net-next 16/17] net: dsa: sja1105: Add a state machine for RX timestamping
Date: Tue, 4 Jun 2019 20:07:55 +0300 [thread overview]
Message-ID: <20190604170756.14338-17-olteanv@gmail.com> (raw)
In-Reply-To: <20190604170756.14338-1-olteanv@gmail.com>
Meta frame reception relies on the hardware keeping its promise that it
will send no other traffic towards the CPU port between a link-local
frame and a meta frame. Otherwise there is no other way to associate
the meta frame with the link-local frame it's holding a timestamp of.
The receive function is made stateful, and buffers a timestampable frame
until its meta frame arrives, then merges the two, drops the meta and
releases the link-local frame up the stack.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
Changes in v3:
Split from previous 09/10 patch (no functional changes).
Changes in v2:
None.
drivers/net/dsa/sja1105/sja1105_main.c | 65 +++++++++++++
include/linux/dsa/sja1105.h | 7 ++
net/dsa/tag_sja1105.c | 121 ++++++++++++++++++++++++-
3 files changed, 192 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index fceca0e5984f..46a851f54b83 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1600,6 +1600,14 @@ static int sja1105_setup(struct dsa_switch *ds)
return sja1105_setup_8021q_tagging(ds, true);
}
+static void sja1105_teardown(struct dsa_switch *ds)
+{
+ struct sja1105_private *priv = ds->priv;
+
+ cancel_work_sync(&priv->tagger_data.rxtstamp_work);
+ skb_queue_purge(&priv->tagger_data.skb_rxtstamp_queue);
+}
+
static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot,
struct sk_buff *skb, bool takets)
{
@@ -1747,6 +1755,60 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
return sja1105_static_config_reload(priv);
}
+#define to_tagger(d) \
+ container_of((d), struct sja1105_tagger_data, rxtstamp_work)
+#define to_sja1105(d) \
+ container_of((d), struct sja1105_private, tagger_data)
+
+static void sja1105_rxtstamp_work(struct work_struct *work)
+{
+ struct sja1105_tagger_data *data = to_tagger(work);
+ struct sja1105_private *priv = to_sja1105(data);
+ struct sk_buff *skb;
+ u64 now;
+
+ mutex_lock(&priv->ptp_lock);
+
+ now = priv->tstamp_cc.read(&priv->tstamp_cc);
+
+ while ((skb = skb_dequeue(&data->skb_rxtstamp_queue)) != NULL) {
+ struct skb_shared_hwtstamps *shwt = skb_hwtstamps(skb);
+ u64 ts;
+
+ *shwt = (struct skb_shared_hwtstamps) {0};
+
+ ts = SJA1105_SKB_CB(skb)->meta_tstamp;
+ ts = sja1105_tstamp_reconstruct(priv, now, ts);
+ ts = timecounter_cyc2time(&priv->tstamp_tc, ts);
+
+ shwt->hwtstamp = ns_to_ktime(ts);
+ netif_rx_ni(skb);
+ }
+
+ mutex_unlock(&priv->ptp_lock);
+}
+
+/* Called from dsa_skb_defer_rx_timestamp */
+bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port,
+ struct sk_buff *skb, unsigned int type)
+{
+ struct sja1105_private *priv = ds->priv;
+ struct sja1105_tagger_data *data = &priv->tagger_data;
+
+ if (!data->hwts_rx_en)
+ return false;
+
+ if (!sja1105_is_link_local(skb))
+ return false;
+
+ /* We need to read the full PTP clock to reconstruct the Rx
+ * timestamp. For that we need a sleepable context.
+ */
+ skb_queue_tail(&data->skb_rxtstamp_queue, skb);
+ schedule_work(&data->rxtstamp_work);
+ return true;
+}
+
/* Called from dsa_skb_tx_timestamp. This callback is just to make DSA clone
* the skb and have it available in DSA_SKB_CB in the .port_deferred_xmit
* callback, where we will timestamp it synchronously.
@@ -1766,6 +1828,7 @@ bool sja1105_port_txtstamp(struct dsa_switch *ds, int port,
static const struct dsa_switch_ops sja1105_switch_ops = {
.get_tag_protocol = sja1105_get_tag_protocol,
.setup = sja1105_setup,
+ .teardown = sja1105_teardown,
.set_ageing_time = sja1105_set_ageing_time,
.phylink_validate = sja1105_phylink_validate,
.phylink_mac_config = sja1105_mac_config,
@@ -1787,6 +1850,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
.port_mdb_add = sja1105_mdb_add,
.port_mdb_del = sja1105_mdb_del,
.port_deferred_xmit = sja1105_port_deferred_xmit,
+ .port_rxtstamp = sja1105_port_rxtstamp,
.port_txtstamp = sja1105_port_txtstamp,
};
@@ -1885,6 +1949,7 @@ static int sja1105_probe(struct spi_device *spi)
tagger_data = &priv->tagger_data;
skb_queue_head_init(&tagger_data->skb_rxtstamp_queue);
+ INIT_WORK(&tagger_data->rxtstamp_work, sja1105_rxtstamp_work);
/* Connections between dsa_port and sja1105_port */
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h
index b83f6e428e5d..794ee76aae56 100644
--- a/include/linux/dsa/sja1105.h
+++ b/include/linux/dsa/sja1105.h
@@ -45,6 +45,13 @@ struct sja1105_tagger_data {
bool hwts_rx_en;
};
+struct sja1105_skb_cb {
+ u32 meta_tstamp;
+};
+
+#define SJA1105_SKB_CB(skb) \
+ ((struct sja1105_skb_cb *)DSA_SKB_CB_PRIV(skb))
+
struct sja1105_port {
struct sja1105_tagger_data *data;
struct dsa_port *dp;
diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c
index 6ec9a32dda62..aac48b42f210 100644
--- a/net/dsa/tag_sja1105.c
+++ b/net/dsa/tag_sja1105.c
@@ -94,6 +94,124 @@ static struct sk_buff *sja1105_xmit(struct sk_buff *skb,
((pcp << VLAN_PRIO_SHIFT) | tx_vid));
}
+static void sja1105_transfer_meta(struct sk_buff *skb,
+ const struct sja1105_meta *meta)
+{
+ struct ethhdr *hdr = eth_hdr(skb);
+
+ hdr->h_dest[3] = meta->dmac_byte_3;
+ hdr->h_dest[4] = meta->dmac_byte_4;
+ SJA1105_SKB_CB(skb)->meta_tstamp = meta->tstamp;
+}
+
+/* This is a simple state machine which follows the hardware mechanism of
+ * generating RX timestamps:
+ *
+ * After each timestampable skb (all traffic for which send_meta1 and
+ * send_meta0 is true, aka all MAC-filtered link-local traffic) a meta frame
+ * containing a partial timestamp is immediately generated by the switch and
+ * sent as a follow-up to the link-local frame on the CPU port.
+ *
+ * The meta frames have no unique identifier (such as sequence number) by which
+ * one may pair them to the correct timestampable frame.
+ * Instead, the switch has internal logic that ensures no frames are sent on
+ * the CPU port between a link-local timestampable frame and its corresponding
+ * meta follow-up. It also ensures strict ordering between ports (lower ports
+ * have higher priority towards the CPU port). For this reason, a per-port
+ * data structure is not needed/desirable.
+ *
+ * This function pairs the link-local frame with its partial timestamp from the
+ * meta follow-up frame. The full timestamp will be reconstructed later in a
+ * work queue.
+ */
+static struct sk_buff
+*sja1105_rcv_meta_state_machine(struct sk_buff *skb,
+ struct sja1105_meta *meta,
+ bool is_link_local,
+ bool is_meta)
+{
+ struct sja1105_port *sp;
+ struct dsa_port *dp;
+
+ dp = dsa_slave_to_port(skb->dev);
+ sp = dp->priv;
+
+ /* Step 1: A timestampable frame was received.
+ * Buffer it until we get its meta frame.
+ */
+ if (is_link_local && sp->data->hwts_rx_en) {
+ spin_lock(&sp->data->meta_lock);
+ /* Was this a link-local frame instead of the meta
+ * that we were expecting?
+ */
+ if (sp->data->stampable_skb) {
+ dev_err_ratelimited(dp->ds->dev,
+ "Expected meta frame, is %12llx "
+ "in the DSA master multicast filter?\n",
+ SJA1105_META_DMAC);
+ }
+
+ /* Hold a reference to avoid dsa_switch_rcv
+ * from freeing the skb.
+ */
+ sp->data->stampable_skb = skb_get(skb);
+ spin_unlock(&sp->data->meta_lock);
+
+ /* Tell DSA we got nothing */
+ return NULL;
+
+ /* Step 2: The meta frame arrived.
+ * Time to take the stampable skb out of the closet, annotate it
+ * with the partial timestamp, and pretend that we received it
+ * just now (basically masquerade the buffered frame as the meta
+ * frame, which serves no further purpose).
+ */
+ } else if (is_meta) {
+ struct sk_buff *stampable_skb;
+
+ spin_lock(&sp->data->meta_lock);
+
+ stampable_skb = sp->data->stampable_skb;
+ sp->data->stampable_skb = NULL;
+
+ /* Was this a meta frame instead of the link-local
+ * that we were expecting?
+ */
+ if (!stampable_skb) {
+ dev_err_ratelimited(dp->ds->dev,
+ "Unexpected meta frame\n");
+ spin_unlock(&sp->data->meta_lock);
+ return NULL;
+ }
+
+ if (stampable_skb->dev != skb->dev) {
+ dev_err_ratelimited(dp->ds->dev,
+ "Meta frame on wrong port\n");
+ spin_unlock(&sp->data->meta_lock);
+ return NULL;
+ }
+
+ /* Free the meta frame and give DSA the buffered stampable_skb
+ * for further processing up the network stack.
+ */
+ kfree_skb(skb);
+
+ skb = skb_copy(stampable_skb, GFP_ATOMIC);
+ if (!skb) {
+ dev_err_ratelimited(dp->ds->dev,
+ "Failed to copy stampable skb\n");
+ return NULL;
+ }
+ sja1105_transfer_meta(skb, meta);
+ /* The cached copy will be freed now */
+ skb_unref(stampable_skb);
+
+ spin_unlock(&sp->data->meta_lock);
+ }
+
+ return skb;
+}
+
static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
struct net_device *netdev,
struct packet_type *pt)
@@ -151,7 +269,8 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
if (is_tagged)
skb = dsa_8021q_remove_header(skb);
- return skb;
+ return sja1105_rcv_meta_state_machine(skb, &meta, is_link_local,
+ is_meta);
}
static struct dsa_device_ops sja1105_netdev_ops = {
--
2.17.1
next prev parent reply other threads:[~2019-06-04 17:08 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 17:07 [PATCH v3 net-next 00/17] PTP support for the SJA1105 DSA driver Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 01/17] net: dsa: Keep a pointer to the skb clone for TX timestamping Vladimir Oltean
2019-06-04 20:31 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 02/17] net: dsa: Add teardown callback for drivers Vladimir Oltean
2019-06-04 18:15 ` Andrew Lunn
2019-06-04 20:32 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 03/17] net: dsa: tag_8021q: Create helper function for removing VLAN header Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 04/17] net: dsa: sja1105: Move sja1105_change_tpid into sja1105_vlan_filtering Vladimir Oltean
2019-06-04 20:58 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 05/17] net: dsa: sja1105: Reverse TPID and TPID2 Vladimir Oltean
2019-06-04 20:33 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 06/17] net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode Vladimir Oltean
2019-06-04 20:35 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 07/17] net: dsa: sja1105: Add support for the PTP clock Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 08/17] net: dsa: sja1105: Move sja1105_is_link_local to include/linux Vladimir Oltean
2019-06-04 20:35 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 09/17] net: dsa: sja1105: Add logic for TX timestamping Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 10/17] net: dsa: sja1105: Build a minimal understanding of meta frames Vladimir Oltean
2019-06-04 21:00 ` Florian Fainelli
2019-06-04 17:07 ` [PATCH v3 net-next 11/17] net: dsa: sja1105: Add support for the AVB Parameters Table Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 12/17] net: dsa: sja1105: Make sja1105_is_link_local not match meta frames Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 13/17] net: dsa: sja1105: Receive and decode " Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 14/17] net: dsa: sja1105: Add a global sja1105_tagger_data structure Vladimir Oltean
2019-06-04 17:07 ` [PATCH v3 net-next 15/17] net: dsa: sja1105: Increase priority of CPU-trapped frames Vladimir Oltean
2019-06-04 17:07 ` Vladimir Oltean [this message]
2019-06-04 17:07 ` [PATCH v3 net-next 17/17] net: dsa: sja1105: Expose PTP timestamping ioctls to userspace Vladimir Oltean
2019-06-05 3:22 ` [PATCH v3 net-next 00/17] PTP support for the SJA1105 DSA driver David Miller
2019-06-05 9:13 ` Vladimir Oltean
2019-06-05 11:33 ` Vladimir Oltean
2019-06-05 17:45 ` Richard Cochran
2019-06-05 17:50 ` Vladimir Oltean
2019-06-05 17:52 ` Vladimir Oltean
2019-06-05 18:08 ` Vladimir Oltean
2019-06-06 3:11 ` Richard Cochran
2019-06-06 13:40 ` Vladimir Oltean
2019-06-07 3:32 ` Richard Cochran
2019-06-07 9:43 ` Vladimir Oltean
2019-06-05 18:44 ` David Miller
2019-06-07 19:15 ` David Miller
2019-06-07 19:38 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604170756.14338-17-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.