From: Shawn Guo <shawnguo@kernel.org>
To: Yuantian Tang <andy.tang@nxp.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, leoyang.li@nxp.com,
robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] arm64: dts: ls1028a: Add temperature sensor node
Date: Wed, 5 Jun 2019 14:37:42 +0800 [thread overview]
Message-ID: <20190605063741.GH29853@dragon> (raw)
In-Reply-To: <20190528022633.40124-1-andy.tang@nxp.com>
On Tue, May 28, 2019 at 10:26:33AM +0800, Yuantian Tang wrote:
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> v2:
> - change the node name and add vcc-supply
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
> 2 files changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 6571d0483c7a..f12e4f510d6e 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -47,6 +47,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -147,6 +156,12 @@
> compatible = "atmel,24c512";
> reg = <0x57>;
> };
> +
> + temperature-sensor@4c {
Keep these i2c devices sort in unit-address order.
Shawn
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> };
>
> i2c@5 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 235ca3a83dc3..e64c28983ec9 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -43,6 +43,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -132,6 +141,12 @@
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> };
> +
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> };
> };
> };
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Yuantian Tang <andy.tang@nxp.com>
Cc: leoyang.li@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: ls1028a: Add temperature sensor node
Date: Wed, 5 Jun 2019 14:37:42 +0800 [thread overview]
Message-ID: <20190605063741.GH29853@dragon> (raw)
In-Reply-To: <20190528022633.40124-1-andy.tang@nxp.com>
On Tue, May 28, 2019 at 10:26:33AM +0800, Yuantian Tang wrote:
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> v2:
> - change the node name and add vcc-supply
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
> 2 files changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 6571d0483c7a..f12e4f510d6e 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -47,6 +47,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -147,6 +156,12 @@
> compatible = "atmel,24c512";
> reg = <0x57>;
> };
> +
> + temperature-sensor@4c {
Keep these i2c devices sort in unit-address order.
Shawn
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> };
>
> i2c@5 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 235ca3a83dc3..e64c28983ec9 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -43,6 +43,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -132,6 +141,12 @@
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> };
> +
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> };
> };
> };
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-06-05 6:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 2:26 [PATCH v2] arm64: dts: ls1028a: Add temperature sensor node Yuantian Tang
2019-05-28 2:26 ` Yuantian Tang
2019-06-05 6:37 ` Shawn Guo [this message]
2019-06-05 6:37 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190605063741.GH29853@dragon \
--to=shawnguo@kernel.org \
--cc=andy.tang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.