From: Lee Jones <lee.jones@linaro.org>
To: Claudiu.Beznea@microchip.com
Cc: linux-pwm@vger.kernel.org, alexandre.belloni@bootlin.com,
bbrezillon@kernel.org, airlied@linux.ie,
Nicolas.Ferre@microchip.com, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, Ludovic.Desroches@microchip.com,
thierry.reding@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [RESEND][PATCH v3 0/6] add LCD support for SAM9X60
Date: Wed, 5 Jun 2019 07:49:48 +0100 [thread overview]
Message-ID: <20190605064948.GI4797@dell> (raw)
In-Reply-To: <1556195748-11106-1-git-send-email-claudiu.beznea@microchip.com>
On Thu, 25 Apr 2019, Claudiu.Beznea@microchip.com wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Hi,
>
> These patches adds support for SAM9X60's LCD controller.
>
> First patches add option to specify if controller clock source is fixed.
> Second patch avoid a variable initialization in atmel_hlcdc_crtc_mode_set_nofb().
> The 3rd add compatibles in pwm-atmel-hlcdc driver.
> The 4th patch enables sys_clk in probe since SAM9X60 needs this.
> Specific support was added also in suspend/resume hooks.
> The 5th patch adds SAM9X60's LCD configuration and enabled it.
>
> I took the changes of this series and introduced also a fix
> (this is the 6th patch in this series) - if you want to send it separately
> I would gladly do it.
>
> I resend this to also include Lee Jones for pwm-atmel-hlcdc changes.
>
> Thank you,
> Claudiu Beznea
>
> Changes in v3:
> - keep compatible string on patch 3/6 on a single line (I keep here a tab
> in front of ".compatible" to be aligned with the rest of the code in
> atmel_hlcdc_dt_ids[])
> - patches 4/7 and 3/7 from v2 were applied so remove them from this version
> - add a fix for atmel_hlcdc (patch 6/6)
>
> Changes in v2:
> - use "|" operator in patch 1/7 to set ATMEL_HLCDC_CLKSEL on cfg
> - collect Acked-by, Reviewed-by tags
>
> Claudiu Beznea (4):
> drm: atmel-hlcdc: add config option for clock selection
> drm: atmel-hlcdc: avoid initializing cfg with zero
> pwm: atmel-hlcdc: add compatible for SAM9X60 HLCDC's PWM
> drm/atmel-hclcdc: revert shift by 8
>
> Sandeep Sheriker Mallikarjun (2):
> drm: atmel-hlcdc: enable sys_clk during initalization.
> drm: atmel-hlcdc: add sam9x60 LCD controller
>
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 18 ++--
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 120 +++++++++++++++++++++++-
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 2 +
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
> drivers/pwm/pwm-atmel-hlcdc.c | 1 +
> 5 files changed, 132 insertions(+), 11 deletions(-)
Why is this being sent to me?
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Claudiu.Beznea@microchip.com
Cc: linux-pwm@vger.kernel.org, alexandre.belloni@bootlin.com,
bbrezillon@kernel.org, airlied@linux.ie,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Ludovic.Desroches@microchip.com, thierry.reding@gmail.com,
daniel@ffwll.ch, linux-arm-kernel@lists.infradead.org
Subject: Re: [RESEND][PATCH v3 0/6] add LCD support for SAM9X60
Date: Wed, 5 Jun 2019 07:49:48 +0100 [thread overview]
Message-ID: <20190605064948.GI4797@dell> (raw)
In-Reply-To: <1556195748-11106-1-git-send-email-claudiu.beznea@microchip.com>
On Thu, 25 Apr 2019, Claudiu.Beznea@microchip.com wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Hi,
>
> These patches adds support for SAM9X60's LCD controller.
>
> First patches add option to specify if controller clock source is fixed.
> Second patch avoid a variable initialization in atmel_hlcdc_crtc_mode_set_nofb().
> The 3rd add compatibles in pwm-atmel-hlcdc driver.
> The 4th patch enables sys_clk in probe since SAM9X60 needs this.
> Specific support was added also in suspend/resume hooks.
> The 5th patch adds SAM9X60's LCD configuration and enabled it.
>
> I took the changes of this series and introduced also a fix
> (this is the 6th patch in this series) - if you want to send it separately
> I would gladly do it.
>
> I resend this to also include Lee Jones for pwm-atmel-hlcdc changes.
>
> Thank you,
> Claudiu Beznea
>
> Changes in v3:
> - keep compatible string on patch 3/6 on a single line (I keep here a tab
> in front of ".compatible" to be aligned with the rest of the code in
> atmel_hlcdc_dt_ids[])
> - patches 4/7 and 3/7 from v2 were applied so remove them from this version
> - add a fix for atmel_hlcdc (patch 6/6)
>
> Changes in v2:
> - use "|" operator in patch 1/7 to set ATMEL_HLCDC_CLKSEL on cfg
> - collect Acked-by, Reviewed-by tags
>
> Claudiu Beznea (4):
> drm: atmel-hlcdc: add config option for clock selection
> drm: atmel-hlcdc: avoid initializing cfg with zero
> pwm: atmel-hlcdc: add compatible for SAM9X60 HLCDC's PWM
> drm/atmel-hclcdc: revert shift by 8
>
> Sandeep Sheriker Mallikarjun (2):
> drm: atmel-hlcdc: enable sys_clk during initalization.
> drm: atmel-hlcdc: add sam9x60 LCD controller
>
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 18 ++--
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 120 +++++++++++++++++++++++-
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 2 +
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
> drivers/pwm/pwm-atmel-hlcdc.c | 1 +
> 5 files changed, 132 insertions(+), 11 deletions(-)
Why is this being sent to me?
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Claudiu.Beznea@microchip.com
Cc: bbrezillon@kernel.org, airlied@linux.ie, daniel@ffwll.ch,
Nicolas.Ferre@microchip.com, alexandre.belloni@bootlin.com,
Ludovic.Desroches@microchip.com, thierry.reding@gmail.com,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org
Subject: Re: [RESEND][PATCH v3 0/6] add LCD support for SAM9X60
Date: Wed, 5 Jun 2019 07:49:48 +0100 [thread overview]
Message-ID: <20190605064948.GI4797@dell> (raw)
In-Reply-To: <1556195748-11106-1-git-send-email-claudiu.beznea@microchip.com>
On Thu, 25 Apr 2019, Claudiu.Beznea@microchip.com wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Hi,
>
> These patches adds support for SAM9X60's LCD controller.
>
> First patches add option to specify if controller clock source is fixed.
> Second patch avoid a variable initialization in atmel_hlcdc_crtc_mode_set_nofb().
> The 3rd add compatibles in pwm-atmel-hlcdc driver.
> The 4th patch enables sys_clk in probe since SAM9X60 needs this.
> Specific support was added also in suspend/resume hooks.
> The 5th patch adds SAM9X60's LCD configuration and enabled it.
>
> I took the changes of this series and introduced also a fix
> (this is the 6th patch in this series) - if you want to send it separately
> I would gladly do it.
>
> I resend this to also include Lee Jones for pwm-atmel-hlcdc changes.
>
> Thank you,
> Claudiu Beznea
>
> Changes in v3:
> - keep compatible string on patch 3/6 on a single line (I keep here a tab
> in front of ".compatible" to be aligned with the rest of the code in
> atmel_hlcdc_dt_ids[])
> - patches 4/7 and 3/7 from v2 were applied so remove them from this version
> - add a fix for atmel_hlcdc (patch 6/6)
>
> Changes in v2:
> - use "|" operator in patch 1/7 to set ATMEL_HLCDC_CLKSEL on cfg
> - collect Acked-by, Reviewed-by tags
>
> Claudiu Beznea (4):
> drm: atmel-hlcdc: add config option for clock selection
> drm: atmel-hlcdc: avoid initializing cfg with zero
> pwm: atmel-hlcdc: add compatible for SAM9X60 HLCDC's PWM
> drm/atmel-hclcdc: revert shift by 8
>
> Sandeep Sheriker Mallikarjun (2):
> drm: atmel-hlcdc: enable sys_clk during initalization.
> drm: atmel-hlcdc: add sam9x60 LCD controller
>
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 18 ++--
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 120 +++++++++++++++++++++++-
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 2 +
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
> drivers/pwm/pwm-atmel-hlcdc.c | 1 +
> 5 files changed, 132 insertions(+), 11 deletions(-)
Why is this being sent to me?
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2019-06-05 6:49 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-25 12:36 [RESEND][PATCH v3 0/6] add LCD support for SAM9X60 Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` [RESEND][PATCH v3 1/6] drm: atmel-hlcdc: add config option for clock selection Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` [RESEND][PATCH v3 2/6] drm: atmel-hlcdc: avoid initializing cfg with zero Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` [RESEND][PATCH v3 3/6] pwm: atmel-hlcdc: add compatible for SAM9X60 HLCDC's PWM Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` [RESEND][PATCH v3 4/6] drm: atmel-hlcdc: enable sys_clk during initalization Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` [RESEND][PATCH v3 5/6] drm: atmel-hlcdc: add sam9x60 LCD controller Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` [RESEND][PATCH v3 6/6] drm/atmel-hclcdc: revert shift by 8 Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-04-25 12:36 ` Claudiu.Beznea
2019-05-02 7:43 ` Maxime Ripard
2019-05-02 7:43 ` Maxime Ripard
2019-05-07 18:27 ` [RESEND][PATCH v3 0/6] add LCD support for SAM9X60 Sam Ravnborg
2019-05-07 18:27 ` Sam Ravnborg
2019-05-07 18:27 ` Sam Ravnborg
2019-06-04 16:18 ` Claudiu.Beznea
2019-06-04 16:18 ` Claudiu.Beznea
2019-06-04 16:18 ` Claudiu.Beznea
2019-06-04 21:54 ` Sam Ravnborg
2019-06-04 21:54 ` Sam Ravnborg
2019-06-05 8:39 ` Claudiu.Beznea
2019-06-05 8:39 ` Claudiu.Beznea
2019-06-05 8:39 ` Claudiu.Beznea
2019-05-08 6:23 ` Lee Jones
2019-05-08 6:23 ` Lee Jones
2019-05-08 8:48 ` Claudiu.Beznea
2019-05-08 8:48 ` Claudiu.Beznea
2019-05-08 8:48 ` Claudiu.Beznea
2019-06-05 6:49 ` Lee Jones [this message]
2019-06-05 6:49 ` Lee Jones
2019-06-05 6:49 ` Lee Jones
2019-06-05 8:43 ` Claudiu.Beznea
2019-06-05 8:43 ` Claudiu.Beznea
2019-06-05 8:43 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190605064948.GI4797@dell \
--to=lee.jones@linaro.org \
--cc=Claudiu.Beznea@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=airlied@linux.ie \
--cc=alexandre.belloni@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.