All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Anson.Huang@nxp.com
Cc: mark.rutland@arm.com, aisheng.dong@nxp.com, ping.bai@nxp.com,
	devicetree@vger.kernel.org, viresh.kumar@linaro.org,
	s.hauer@pengutronix.de, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, Linux-imx@nxp.com, kernel@pengutronix.de,
	leonard.crestez@nxp.com, festevam@gmail.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: imx8mm: Move gic node into soc node
Date: Thu, 6 Jun 2019 10:18:16 +0800	[thread overview]
Message-ID: <20190606021803.GW29853@dragon> (raw)
In-Reply-To: <20190603015020.41410-1-Anson.Huang@nxp.com>

On Mon, Jun 03, 2019 at 09:50:20AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> GIC is inside of SoC from architecture perspective, it should
> be located inside of soc node in DT.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

It doesn't apply to my imx/dt64 branch.  Please generate it against that
branch for my for-next.

Shawn

> ---
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index dc99f45..429312e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -169,15 +169,6 @@
>  		clock-output-names = "clk_ext4";
>  	};
>  
> -	gic: interrupt-controller@38800000 {
> -		compatible = "arm,gic-v3";
> -		reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
> -		      <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
> -		#interrupt-cells = <3>;
> -		interrupt-controller;
> -		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> -	};
> -
>  	psci {
>  		compatible = "arm,psci-1.0";
>  		method = "smc";
> @@ -739,6 +730,15 @@
>  			dma-names = "rx-tx";
>  			status = "disabled";
>  		};
> +
> +		gic: interrupt-controller@38800000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x38800000 0x10000>, /* GIC Dist */
> +			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  
>  	usbphynop1: usbphynop1 {
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Anson.Huang@nxp.com
Cc: mark.rutland@arm.com, aisheng.dong@nxp.com, ping.bai@nxp.com,
	devicetree@vger.kernel.org, viresh.kumar@linaro.org,
	s.hauer@pengutronix.de, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, Linux-imx@nxp.com, kernel@pengutronix.de,
	leonard.crestez@nxp.com, festevam@gmail.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: imx8mm: Move gic node into soc node
Date: Thu, 6 Jun 2019 10:18:16 +0800	[thread overview]
Message-ID: <20190606021803.GW29853@dragon> (raw)
In-Reply-To: <20190603015020.41410-1-Anson.Huang@nxp.com>

On Mon, Jun 03, 2019 at 09:50:20AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> GIC is inside of SoC from architecture perspective, it should
> be located inside of soc node in DT.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

It doesn't apply to my imx/dt64 branch.  Please generate it against that
branch for my for-next.

Shawn

> ---
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index dc99f45..429312e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -169,15 +169,6 @@
>  		clock-output-names = "clk_ext4";
>  	};
>  
> -	gic: interrupt-controller@38800000 {
> -		compatible = "arm,gic-v3";
> -		reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
> -		      <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
> -		#interrupt-cells = <3>;
> -		interrupt-controller;
> -		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> -	};
> -
>  	psci {
>  		compatible = "arm,psci-1.0";
>  		method = "smc";
> @@ -739,6 +730,15 @@
>  			dma-names = "rx-tx";
>  			status = "disabled";
>  		};
> +
> +		gic: interrupt-controller@38800000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x38800000 0x10000>, /* GIC Dist */
> +			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  
>  	usbphynop1: usbphynop1 {
> -- 
> 2.7.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Anson.Huang@nxp.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	leonard.crestez@nxp.com, aisheng.dong@nxp.com,
	viresh.kumar@linaro.org, ping.bai@nxp.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Linux-imx@nxp.com
Subject: Re: [PATCH] arm64: dts: imx8mm: Move gic node into soc node
Date: Thu, 6 Jun 2019 10:18:16 +0800	[thread overview]
Message-ID: <20190606021803.GW29853@dragon> (raw)
In-Reply-To: <20190603015020.41410-1-Anson.Huang@nxp.com>

On Mon, Jun 03, 2019 at 09:50:20AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> GIC is inside of SoC from architecture perspective, it should
> be located inside of soc node in DT.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

It doesn't apply to my imx/dt64 branch.  Please generate it against that
branch for my for-next.

Shawn

> ---
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index dc99f45..429312e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -169,15 +169,6 @@
>  		clock-output-names = "clk_ext4";
>  	};
>  
> -	gic: interrupt-controller@38800000 {
> -		compatible = "arm,gic-v3";
> -		reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
> -		      <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
> -		#interrupt-cells = <3>;
> -		interrupt-controller;
> -		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> -	};
> -
>  	psci {
>  		compatible = "arm,psci-1.0";
>  		method = "smc";
> @@ -739,6 +730,15 @@
>  			dma-names = "rx-tx";
>  			status = "disabled";
>  		};
> +
> +		gic: interrupt-controller@38800000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x38800000 0x10000>, /* GIC Dist */
> +			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  
>  	usbphynop1: usbphynop1 {
> -- 
> 2.7.4
> 

  reply	other threads:[~2019-06-06  2:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03  1:50 [PATCH] arm64: dts: imx8mm: Move gic node into soc node Anson.Huang
2019-06-03  1:50 ` Anson.Huang
2019-06-06  2:18 ` Shawn Guo [this message]
2019-06-06  2:18   ` Shawn Guo
2019-06-06  2:18   ` Shawn Guo
2019-06-06  2:38   ` Anson Huang
2019-06-06  2:38     ` Anson Huang
2019-06-06  2:38     ` Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190606021803.GW29853@dragon \
    --to=shawnguo@kernel.org \
    --cc=Anson.Huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.