[U-Boot] [PATCH v3 1/2] power: pmic: Kconfig: Add SPL_PMIC configs for palmas/lp873x/lp87565

[U-Boot] [PATCH v3 1/2] power: pmic: Kconfig: Add SPL_PMIC configs for palmas/lp873x/lp87565

[Keerthy]

Add SPL_PMIC configs for palmas/lp873x/lp87565. These were missing
and the Makefile already assumes them to be defined. Add the corresponding
SPL config options. This enables the pmics in SPL.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---

Changes in v3:

  * As per Tom's comments added the SPL_* configs instead of removing
    SPL in Makefile

 drivers/power/pmic/Kconfig | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index b0cd260354..064b383880 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -238,3 +238,24 @@ config PMIC_STPMIC1
 	The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
 	It is accessed via an I2C interface. The device is used with STM32MP1
 	SoCs. This driver implements register read/write operations.
+
+config SPL_PMIC_PALMAS
+	bool "Enable driver for Texas Instruments PALMAS PMIC"
+	depends on DM_PMIC
+	help
+	The PALMAS is a PMIC containing several LDOs, SMPS.
+	This driver binds the pmic children in SPL.
+
+config SPL_PMIC_LP873X
+	bool "Enable driver for Texas Instruments LP873X PMIC"
+	depends on DM_PMIC
+	help
+	The LP873X is a PMIC containing couple of LDOs and couple of SMPS.
+	This driver binds the pmic children in SPL.
+
+config SPL_PMIC_LP87565
+	bool "Enable driver for Texas Instruments LP87565 PMIC"
+	depends on DM_PMIC
+	help
+	The LP87565 is a PMIC containing a bunch of SMPS.
+	This driver binds the pmic children in SPL.
-- 
2.17.1

[U-Boot] [PATCH v3 2/2] power: regulator: Kconfig: Add SPL_DM_REGULATOR configs for palmas/lp873x/lp87565

[Keerthy]

Add SPL_DM_REGULATOR configs for palmas/lp873x/lp87565. These were missing
and the Makefile already assumes them to be defined. Add the corresponding
SPL config options. This enables the regulator support in SPL.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---

Changes in v3:

  * As per Tom's comments added the SPL_* configs instead of removing
    SPL in Makefile

 drivers/power/regulator/Kconfig | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 72dfc48981..4e6c440d13 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -258,3 +258,29 @@ config SPL_DM_REGULATOR_STPMIC1
 	depends on SPL_DM_REGULATOR && PMIC_STPMIC1
 	help
 	  Enable support for the regulator functions of the STPMIC1 PMIC in SPL.
+
+config SPL_DM_REGULATOR_PALMAS
+	bool "Enable driver for PALMAS PMIC regulators"
+       depends on SPL_PMIC_PALMAS
+	help
+	This enables implementation of driver-model regulator uclass
+	features for REGULATOR PALMAS and the family of PALMAS PMICs.
+	The driver implements get/set api for: value and enable in SPL.
+
+config SPL_DM_REGULATOR_LP87565
+	bool "Enable driver for LP87565 PMIC regulators"
+       depends on SPL_PMIC_LP87565
+	help
+	This enables implementation of driver-model regulator uclass
+	features for REGULATOR LP87565 and the family of LP87565 PMICs.
+	LP87565 series of PMICs have 4 single phase BUCKs that can also
+	be configured in multi phase modes. The driver implements
+	get/set api for value and enable in SPL.
+
+config SPL_DM_REGULATOR_LP873X
+	bool "Enable driver for LP873X PMIC regulators"
+	depends on SPL_PMIC_LP873X
+	help
+	This enables implementation of driver-model regulator uclass
+	features for REGULATOR LP873X and the family of LP873X PMICs.
+	The driver implements get/set api for: value and enable in SPL.
-- 
2.17.1

[U-Boot] [PATCH v3 2/2] power: regulator: Kconfig: Add SPL_DM_REGULATOR configs for palmas/lp873x/lp87565

[Tom Rini]

On Thu, Jun 06, 2019 at 04:06:56PM +0530, Keerthy wrote:

> Add SPL_DM_REGULATOR configs for palmas/lp873x/lp87565. These were missing
> and the Makefile already assumes them to be defined. Add the corresponding
> SPL config options. This enables the regulator support in SPL.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190714/558e86df/attachment.sig>

[U-Boot] [PATCH v3 1/2] power: pmic: Kconfig: Add SPL_PMIC configs for palmas/lp873x/lp87565

[Tom Rini]

On Thu, Jun 06, 2019 at 04:06:55PM +0530, Keerthy wrote:

> Add SPL_PMIC configs for palmas/lp873x/lp87565. These were missing
> and the Makefile already assumes them to be defined. Add the corresponding
> SPL config options. This enables the pmics in SPL.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190714/b922ff4f/attachment.sig>