From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org, Igor Mammedov <imammedo@redhat.com>
Cc: "Yoshinori Sato" <ysato@users.sourceforge.jp>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [Qemu-devel] [PATCH v19 13/21] hw/char: RX62N serial communication interface (SCI)
Date: Tue, 11 Jun 2019 13:37:23 +0200 [thread overview]
Message-ID: <20190611113731.16940-14-philmd@redhat.com> (raw)
In-Reply-To: <20190611113731.16940-1-philmd@redhat.com>
From: Yoshinori Sato <ysato@users.sourceforge.jp>
This module supported only non FIFO type.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-8-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
hw/char/Kconfig | 3 +
hw/char/Makefile.objs | 1 +
hw/char/renesas_sci.c | 340 ++++++++++++++++++++++++++++++++++
include/hw/char/renesas_sci.h | 45 +++++
4 files changed, 389 insertions(+)
create mode 100644 hw/char/renesas_sci.c
create mode 100644 include/hw/char/renesas_sci.h
diff --git a/hw/char/Kconfig b/hw/char/Kconfig
index 40e7a8b8bb..874627520c 100644
--- a/hw/char/Kconfig
+++ b/hw/char/Kconfig
@@ -46,3 +46,6 @@ config SCLPCONSOLE
config TERMINAL3270
bool
+
+config RENESAS_SCI
+ bool
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 02d8a66925..4472d563b5 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -21,6 +21,7 @@ obj-$(CONFIG_PSERIES) += spapr_vty.o
obj-$(CONFIG_DIGIC) += digic-uart.o
obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o
obj-$(CONFIG_RASPI) += bcm2835_aux.o
+obj-$(CONFIG_RENESAS_SCI) += renesas_sci.o
common-obj-$(CONFIG_CMSDK_APB_UART) += cmsdk-apb-uart.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
diff --git a/hw/char/renesas_sci.c b/hw/char/renesas_sci.c
new file mode 100644
index 0000000000..6298cbf43a
--- /dev/null
+++ b/hw/char/renesas_sci.c
@@ -0,0 +1,340 @@
+/*
+ * Renesas Serial Communication Interface
+ *
+ * Datasheet: RX62N Group, RX621 Group User's Manual: Hardware
+ * (Rev.1.40 R01UH0033EJ0140)
+ *
+ * Copyright (c) 2019 Yoshinori Sato
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "hw/sysbus.h"
+#include "hw/registerfields.h"
+#include "hw/char/renesas_sci.h"
+#include "qemu/error-report.h"
+
+/* SCI register map */
+REG8(SMR, 0)
+ FIELD(SMR, CKS, 0, 2)
+ FIELD(SMR, MP, 2, 1)
+ FIELD(SMR, STOP, 3, 1)
+ FIELD(SMR, PM, 4, 1)
+ FIELD(SMR, PE, 5, 1)
+ FIELD(SMR, CHR, 6, 1)
+ FIELD(SMR, CM, 7, 1)
+REG8(BRR, 1)
+REG8(SCR, 2)
+ FIELD(SCR, CKE, 0, 2)
+ FIELD(SCR, TEIE, 2, 1)
+ FIELD(SCR, MPIE, 3, 1)
+ FIELD(SCR, RE, 4, 1)
+ FIELD(SCR, TE, 5, 1)
+ FIELD(SCR, RIE, 6, 1)
+ FIELD(SCR, TIE, 7, 1)
+REG8(TDR, 3)
+REG8(SSR, 4)
+ FIELD(SSR, MPBT, 0, 1)
+ FIELD(SSR, MPB, 1, 1)
+ FIELD(SSR, TEND, 2, 1)
+ FIELD(SSR, ERR, 3, 3)
+ FIELD(SSR, PER, 3, 1)
+ FIELD(SSR, FER, 4, 1)
+ FIELD(SSR, ORER, 5, 1)
+ FIELD(SSR, RDRF, 6, 1)
+ FIELD(SSR, TDRE, 7, 1)
+REG8(RDR, 5)
+REG8(SCMR, 6)
+ FIELD(SCMR, SMIF, 0, 1)
+ FIELD(SCMR, SINV, 2, 1)
+ FIELD(SCMR, SDIR, 3, 1)
+ FIELD(SCMR, BCP2, 7, 1)
+REG8(SEMR, 7)
+ FIELD(SEMR, ACS0, 0, 1)
+ FIELD(SEMR, ABCS, 4, 1)
+
+static int can_receive(void *opaque)
+{
+ RSCIState *sci = RSCI(opaque);
+ if (sci->rx_next > qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)) {
+ return 0;
+ } else {
+ return FIELD_EX8(sci->scr, SCR, RE);
+ }
+}
+
+static void receive(void *opaque, const uint8_t *buf, int size)
+{
+ RSCIState *sci = RSCI(opaque);
+ sci->rx_next = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + sci->trtime;
+ if (FIELD_EX8(sci->ssr, SSR, RDRF) || size > 1) {
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, ORER, 1);
+ if (FIELD_EX8(sci->scr, SCR, RIE)) {
+ qemu_set_irq(sci->irq[ERI], 1);
+ }
+ } else {
+ sci->rdr = buf[0];
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, RDRF, 1);
+ if (FIELD_EX8(sci->scr, SCR, RIE)) {
+ qemu_irq_pulse(sci->irq[RXI]);
+ }
+ }
+}
+
+static void send_byte(RSCIState *sci)
+{
+ if (qemu_chr_fe_backend_connected(&sci->chr)) {
+ qemu_chr_fe_write_all(&sci->chr, &sci->tdr, 1);
+ }
+ timer_mod(sci->timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + sci->trtime);
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, TEND, 0);
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, TDRE, 1);
+ qemu_set_irq(sci->irq[TEI], 0);
+ if (FIELD_EX8(sci->scr, SCR, TIE)) {
+ qemu_irq_pulse(sci->irq[TXI]);
+ }
+}
+
+static void txend(void *opaque)
+{
+ RSCIState *sci = RSCI(opaque);
+ if (!FIELD_EX8(sci->ssr, SSR, TDRE)) {
+ send_byte(sci);
+ } else {
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, TEND, 1);
+ if (FIELD_EX8(sci->scr, SCR, TEIE)) {
+ qemu_set_irq(sci->irq[TEI], 1);
+ }
+ }
+}
+
+static void update_trtime(RSCIState *sci)
+{
+ /* char per bits */
+ sci->trtime = 8 - FIELD_EX8(sci->smr, SMR, CHR);
+ sci->trtime += FIELD_EX8(sci->smr, SMR, PE);
+ sci->trtime += FIELD_EX8(sci->smr, SMR, STOP) + 1;
+ /* x bit transmit time (32 * divrate * brr) / base freq */
+ sci->trtime *= 32 * sci->brr;
+ sci->trtime *= 1 << (2 * FIELD_EX8(sci->smr, SMR, CKS));
+ sci->trtime *= NANOSECONDS_PER_SECOND;
+ sci->trtime /= sci->input_freq;
+}
+
+#define IS_TR_ENABLED(scr) \
+ (FIELD_EX8(scr, SCR, TE) || FIELD_EX8(scr, SCR, RE))
+
+static void sci_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+ hwaddr offset = addr & 0x07;
+ RSCIState *sci = RSCI(opaque);
+
+ switch (offset) {
+ case A_SMR:
+ if (!IS_TR_ENABLED(sci->scr)) {
+ sci->smr = val;
+ update_trtime(sci);
+ }
+ break;
+ case A_BRR:
+ if (!IS_TR_ENABLED(sci->scr)) {
+ sci->brr = val;
+ update_trtime(sci);
+ }
+ break;
+ case A_SCR:
+ sci->scr = val;
+ if (FIELD_EX8(sci->scr, SCR, TE)) {
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, TDRE, 1);
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, TEND, 1);
+ if (FIELD_EX8(sci->scr, SCR, TIE)) {
+ qemu_irq_pulse(sci->irq[TXI]);
+ }
+ }
+ if (!FIELD_EX8(sci->scr, SCR, TEIE)) {
+ qemu_set_irq(sci->irq[TEI], 0);
+ }
+ if (!FIELD_EX8(sci->scr, SCR, RIE)) {
+ qemu_set_irq(sci->irq[ERI], 0);
+ }
+ break;
+ case A_TDR:
+ sci->tdr = val;
+ if (FIELD_EX8(sci->ssr, SSR, TEND)) {
+ send_byte(sci);
+ } else {
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, TDRE, 0);
+ }
+ break;
+ case A_SSR:
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, MPBT,
+ FIELD_EX8(val, SSR, MPBT));
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, ERR,
+ FIELD_EX8(val, SSR, ERR) & 0x07);
+ if (FIELD_EX8(sci->read_ssr, SSR, ERR) &&
+ FIELD_EX8(sci->ssr, SSR, ERR) == 0) {
+ qemu_set_irq(sci->irq[ERI], 0);
+ }
+ break;
+ case A_RDR:
+ qemu_log_mask(LOG_GUEST_ERROR, "reneas_sci: RDR is read only.\n");
+ break;
+ case A_SCMR:
+ sci->scmr = val; break;
+ case A_SEMR: /* SEMR */
+ sci->semr = val; break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "renesas_sci: Register 0x%" HWADDR_PRIX
+ " not implemented\n", offset);
+ }
+}
+
+static uint64_t sci_read(void *opaque, hwaddr addr, unsigned size)
+{
+ hwaddr offset = addr & 0x07;
+ RSCIState *sci = RSCI(opaque);
+
+ switch (offset) {
+ case A_SMR:
+ return sci->smr;
+ case A_BRR:
+ return sci->brr;
+ case A_SCR:
+ return sci->scr;
+ case A_TDR:
+ return sci->tdr;
+ case A_SSR:
+ sci->read_ssr = sci->ssr;
+ return sci->ssr;
+ case A_RDR:
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, RDRF, 0);
+ return sci->rdr;
+ case A_SCMR:
+ return sci->scmr;
+ case A_SEMR:
+ return sci->semr;
+ default:
+ qemu_log_mask(LOG_UNIMP, "renesas_sci: Register 0x%" HWADDR_PRIX
+ " not implemented.\n", offset);
+ }
+ return UINT64_MAX;
+}
+
+static const MemoryRegionOps sci_ops = {
+ .write = sci_write,
+ .read = sci_read,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .max_access_size = 1,
+ },
+};
+
+static void rsci_reset(DeviceState *dev)
+{
+ RSCIState *sci = RSCI(dev);
+ sci->smr = sci->scr = 0x00;
+ sci->brr = 0xff;
+ sci->tdr = 0xff;
+ sci->rdr = 0x00;
+ sci->ssr = 0x84;
+ sci->scmr = 0x00;
+ sci->semr = 0x00;
+ sci->rx_next = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+}
+
+static void sci_event(void *opaque, int event)
+{
+ RSCIState *sci = RSCI(opaque);
+ if (event == CHR_EVENT_BREAK) {
+ sci->ssr = FIELD_DP8(sci->ssr, SSR, FER, 1);
+ if (FIELD_EX8(sci->scr, SCR, RIE)) {
+ qemu_set_irq(sci->irq[ERI], 1);
+ }
+ }
+}
+
+static void rsci_realize(DeviceState *dev, Error **errp)
+{
+ RSCIState *sci = RSCI(dev);
+
+ if (sci->input_freq == 0) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "renesas_sci: input-freq property must be set.");
+ return;
+ }
+ qemu_chr_fe_set_handlers(&sci->chr, can_receive, receive,
+ sci_event, NULL, sci, NULL, true);
+}
+
+static void rsci_init(Object *obj)
+{
+ SysBusDevice *d = SYS_BUS_DEVICE(obj);
+ RSCIState *sci = RSCI(obj);
+ int i;
+
+ memory_region_init_io(&sci->memory, OBJECT(sci), &sci_ops,
+ sci, "renesas-sci", 0x8);
+ sysbus_init_mmio(d, &sci->memory);
+
+ for (i = 0; i < SCI_NR_IRQ; i++) {
+ sysbus_init_irq(d, &sci->irq[i]);
+ }
+ sci->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, txend, sci);
+}
+
+static const VMStateDescription vmstate_rcmt = {
+ .name = "renesas-sci",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property rsci_properties[] = {
+ DEFINE_PROP_UINT64("input-freq", RSCIState, input_freq, 0),
+ DEFINE_PROP_CHR("chardev", RSCIState, chr),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void rsci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = rsci_realize;
+ dc->props = rsci_properties;
+ dc->vmsd = &vmstate_rcmt;
+ dc->reset = rsci_reset;
+}
+
+static const TypeInfo rsci_info = {
+ .name = TYPE_RENESAS_SCI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(RSCIState),
+ .instance_init = rsci_init,
+ .class_init = rsci_class_init,
+};
+
+static void rsci_register_types(void)
+{
+ type_register_static(&rsci_info);
+}
+
+type_init(rsci_register_types)
diff --git a/include/hw/char/renesas_sci.h b/include/hw/char/renesas_sci.h
new file mode 100644
index 0000000000..50d1336944
--- /dev/null
+++ b/include/hw/char/renesas_sci.h
@@ -0,0 +1,45 @@
+/*
+ * Renesas Serial Communication Interface
+ *
+ * Copyright (c) 2018 Yoshinori Sato
+ *
+ * This code is licensed under the GPL version 2 or later.
+ *
+ */
+
+#include "chardev/char-fe.h"
+#include "qemu/timer.h"
+#include "hw/sysbus.h"
+
+#define TYPE_RENESAS_SCI "renesas-sci"
+#define RSCI(obj) OBJECT_CHECK(RSCIState, (obj), TYPE_RENESAS_SCI)
+
+enum {
+ ERI = 0,
+ RXI = 1,
+ TXI = 2,
+ TEI = 3,
+ SCI_NR_IRQ = 4,
+};
+
+typedef struct {
+ SysBusDevice parent_obj;
+ MemoryRegion memory;
+
+ uint8_t smr;
+ uint8_t brr;
+ uint8_t scr;
+ uint8_t tdr;
+ uint8_t ssr;
+ uint8_t rdr;
+ uint8_t scmr;
+ uint8_t semr;
+
+ uint8_t read_ssr;
+ int64_t trtime;
+ int64_t rx_next;
+ QEMUTimer *timer;
+ CharBackend chr;
+ uint64_t input_freq;
+ qemu_irq irq[SCI_NR_IRQ];
+} RSCIState;
--
2.20.1
next prev parent reply other threads:[~2019-06-11 11:50 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-11 11:37 [Qemu-devel] [PATCH v19 00/21] Add RX archtecture support Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 01/21] target/rx: TCG translation Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 02/21] target/rx: TCG helper Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 03/21] target/rx: CPU definition Philippe Mathieu-Daudé
2019-06-11 13:12 ` Igor Mammedov
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 04/21] target/rx: RX disassembler Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 05/21] target/rx: Disassemble rx_index_addr into a string Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 06/21] target/rx: Replace operand with prt_ldmi in disassembler Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 07/21] target/rx: Use prt_ldmi for XCHG_mr disassembly Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 08/21] target/rx: Emit all disassembly in one prt() Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 09/21] target/rx: Collect all bytes during disassembly Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 10/21] target/rx: Dump bytes for each insn " Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 11/21] hw/intc: RX62N interrupt controller (ICUa) Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 12/21] hw/timer: RX62N internal timer modules Philippe Mathieu-Daudé
2019-06-11 11:37 ` Philippe Mathieu-Daudé [this message]
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 14/21] hw/rx: RX Target hardware definition Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 15/21] hw/rx: Honor -accel qtest Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 16/21] hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core Philippe Mathieu-Daudé
2019-06-11 13:21 ` Yoshinori Sato
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 17/21] qemu/bitops.h: Add extract8 and extract16 Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 18/21] hw/registerfields.h: Add 8bit and 16bit register macros Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 19/21] Add rx-softmmu Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 20/21] MAINTAINERS: Add RX Philippe Mathieu-Daudé
2019-06-11 11:37 ` [Qemu-devel] [PATCH v19 21/21] BootLinuxConsoleTest: Test the RX-Virt machine Philippe Mathieu-Daudé
2019-06-11 12:59 ` [Qemu-devel] [PATCH v19 00/21] Add RX archtecture support no-reply
2019-06-11 13:19 ` no-reply
2019-06-11 13:21 ` no-reply
2019-06-11 13:39 ` no-reply
2019-06-11 13:42 ` no-reply
2019-06-11 13:51 ` no-reply
2019-06-11 14:16 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190611113731.16940-14-philmd@redhat.com \
--to=philmd@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=imammedo@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.