[PATCH 0/4] hdmi on rk3229

[PATCH 0/4] hdmi on rk3229

[Heiko Stuebner]

The hdmiphy needs its clock reparented to the actual hdmiphy-pll
that gets generated in the hdmiphy itself.

This incorporates adapted versions of Justin's original patches
and also the needed clock adaptions to make it possible to
reparent the hdmiphy clock.

Heiko Stuebner (2):
  clk: rockchip: add clock id for hdmi_phy special clock
  clk: rockchip: export HDMIPHY clock

Justin Swartz (2):
  ARM: dts: rockchip: add display nodes for rk322x
  ARM: dts: rockchip: fix vop iommu-cells on rk322x

 arch/arm/boot/dts/rk322x.dtsi          | 85 +++++++++++++++++++++++++-
 drivers/clk/rockchip/clk-rk3228.c      |  2 +-
 include/dt-bindings/clock/rk3228-cru.h |  1 +
 3 files changed, 86 insertions(+), 2 deletions(-)

-- 
2.20.1

[PATCH 0/4] hdmi on rk3229

[Heiko Stuebner]

The hdmiphy needs its clock reparented to the actual hdmiphy-pll
that gets generated in the hdmiphy itself.

This incorporates adapted versions of Justin's original patches
and also the needed clock adaptions to make it possible to
reparent the hdmiphy clock.

Heiko Stuebner (2):
  clk: rockchip: add clock id for hdmi_phy special clock
  clk: rockchip: export HDMIPHY clock

Justin Swartz (2):
  ARM: dts: rockchip: add display nodes for rk322x
  ARM: dts: rockchip: fix vop iommu-cells on rk322x

 arch/arm/boot/dts/rk322x.dtsi          | 85 +++++++++++++++++++++++++-
 drivers/clk/rockchip/clk-rk3228.c      |  2 +-
 include/dt-bindings/clock/rk3228-cru.h |  1 +
 3 files changed, 86 insertions(+), 2 deletions(-)

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/4] clk: rockchip: add clock id for hdmi_phy special clock

[Heiko Stuebner]

Add the needed clock id to enable clock settings from devicetree.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 include/dt-bindings/clock/rk3228-cru.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/rk3228-cru.h b/include/dt-bindings/clock/rk3228-cru.h
index 3b245e3df8da..de550ea56eeb 100644
--- a/include/dt-bindings/clock/rk3228-cru.h
+++ b/include/dt-bindings/clock/rk3228-cru.h
@@ -64,6 +64,7 @@
 #define SCLK_WIFI		141
 #define SCLK_OTGPHY0		142
 #define SCLK_OTGPHY1		143
+#define SCLK_HDMI_PHY		144
 
 /* dclk gates */
 #define DCLK_VOP		190
-- 
2.20.1

[PATCH 1/4] clk: rockchip: add clock id for hdmi_phy special clock

[Heiko Stuebner]

Add the needed clock id to enable clock settings from devicetree.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 include/dt-bindings/clock/rk3228-cru.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/rk3228-cru.h b/include/dt-bindings/clock/rk3228-cru.h
index 3b245e3df8da..de550ea56eeb 100644
--- a/include/dt-bindings/clock/rk3228-cru.h
+++ b/include/dt-bindings/clock/rk3228-cru.h
@@ -64,6 +64,7 @@
 #define SCLK_WIFI		141
 #define SCLK_OTGPHY0		142
 #define SCLK_OTGPHY1		143
+#define SCLK_HDMI_PHY		144
 
 /* dclk gates */
 #define DCLK_VOP		190
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/4] clk: rockchip: add clock id for hdmi_phy special clock

[Justin Swartz]

On 2019-06-14 18:54, Heiko Stuebner wrote:

> Add the needed clock id to enable clock settings from devicetree.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> include/dt-bindings/clock/rk3228-cru.h | 1 +
> 1 file changed, 1 insertion(+)
> 
> diff --git a/include/dt-bindings/clock/rk3228-cru.h 
> b/include/dt-bindings/clock/rk3228-cru.h
> index 3b245e3df8da..de550ea56eeb 100644
> --- a/include/dt-bindings/clock/rk3228-cru.h
> +++ b/include/dt-bindings/clock/rk3228-cru.h
> @@ -64,6 +64,7 @@
> #define SCLK_WIFI        141
> #define SCLK_OTGPHY0        142
> #define SCLK_OTGPHY1        143
> +#define SCLK_HDMI_PHY        144
> 
> /* dclk gates */
> #define DCLK_VOP        190

Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>

Re: [PATCH 1/4] clk: rockchip: add clock id for hdmi_phy special clock

[Justin Swartz]

On 2019-06-14 18:54, Heiko Stuebner wrote:

> Add the needed clock id to enable clock settings from devicetree.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> include/dt-bindings/clock/rk3228-cru.h | 1 +
> 1 file changed, 1 insertion(+)
> 
> diff --git a/include/dt-bindings/clock/rk3228-cru.h 
> b/include/dt-bindings/clock/rk3228-cru.h
> index 3b245e3df8da..de550ea56eeb 100644
> --- a/include/dt-bindings/clock/rk3228-cru.h
> +++ b/include/dt-bindings/clock/rk3228-cru.h
> @@ -64,6 +64,7 @@
> #define SCLK_WIFI        141
> #define SCLK_OTGPHY0        142
> #define SCLK_OTGPHY1        143
> +#define SCLK_HDMI_PHY        144
> 
> /* dclk gates */
> #define DCLK_VOP        190

Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] clk: rockchip: export HDMIPHY clock

[Heiko Stuebner]

Export the hdmiphy clock mux via the newly added clock-id.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rk3228.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index 1c5267d134ee..d17cfb7a3ff4 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -247,7 +247,7 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(4), 0, GFLAGS),
 
 	/* PD_MISC */
-	MUX(0, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
+	MUX(SCLK_HDMI_PHY, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
 			RK2928_MISC_CON, 13, 1, MFLAGS),
 	MUX(0, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
 			RK2928_MISC_CON, 14, 1, MFLAGS),
-- 
2.20.1

[PATCH 2/4] clk: rockchip: export HDMIPHY clock

[Heiko Stuebner]

Export the hdmiphy clock mux via the newly added clock-id.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rk3228.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index 1c5267d134ee..d17cfb7a3ff4 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -247,7 +247,7 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(4), 0, GFLAGS),
 
 	/* PD_MISC */
-	MUX(0, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
+	MUX(SCLK_HDMI_PHY, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
 			RK2928_MISC_CON, 13, 1, MFLAGS),
 	MUX(0, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
 			RK2928_MISC_CON, 14, 1, MFLAGS),
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] clk: rockchip: export HDMIPHY clock

[Heiko Stuebner]

Export the hdmiphy clock mux via the newly added clock-id.

Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 drivers/clk/rockchip/clk-rk3228.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index 1c5267d134ee..d17cfb7a3ff4 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -247,7 +247,7 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(4), 0, GFLAGS),
 
 	/* PD_MISC */
-	MUX(0, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
+	MUX(SCLK_HDMI_PHY, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
 			RK2928_MISC_CON, 13, 1, MFLAGS),
 	MUX(0, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
 			RK2928_MISC_CON, 14, 1, MFLAGS),
-- 
2.20.1

Re: [PATCH 2/4] clk: rockchip: export HDMIPHY clock

[Justin Swartz]

On 2019-06-14 18:54, Heiko Stuebner wrote:

> Export the hdmiphy clock mux via the newly added clock-id.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> drivers/clk/rockchip/clk-rk3228.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3228.c 
> b/drivers/clk/rockchip/clk-rk3228.c
> index 1c5267d134ee..d17cfb7a3ff4 100644
> --- a/drivers/clk/rockchip/clk-rk3228.c
> +++ b/drivers/clk/rockchip/clk-rk3228.c
> @@ -247,7 +247,7 @@ static struct rockchip_clk_branch 
> rk3228_clk_branches[] __initdata = {
> RK2928_CLKGATE_CON(4), 0, GFLAGS),
> 
> /* PD_MISC */
> -    MUX(0, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
> +    MUX(SCLK_HDMI_PHY, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
> RK2928_MISC_CON, 13, 1, MFLAGS),
> MUX(0, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
> RK2928_MISC_CON, 14, 1, MFLAGS),

Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>

Re: [PATCH 2/4] clk: rockchip: export HDMIPHY clock

[Justin Swartz]

On 2019-06-14 18:54, Heiko Stuebner wrote:

> Export the hdmiphy clock mux via the newly added clock-id.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> drivers/clk/rockchip/clk-rk3228.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3228.c 
> b/drivers/clk/rockchip/clk-rk3228.c
> index 1c5267d134ee..d17cfb7a3ff4 100644
> --- a/drivers/clk/rockchip/clk-rk3228.c
> +++ b/drivers/clk/rockchip/clk-rk3228.c
> @@ -247,7 +247,7 @@ static struct rockchip_clk_branch 
> rk3228_clk_branches[] __initdata = {
> RK2928_CLKGATE_CON(4), 0, GFLAGS),
> 
> /* PD_MISC */
> -    MUX(0, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
> +    MUX(SCLK_HDMI_PHY, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
> RK2928_MISC_CON, 13, 1, MFLAGS),
> MUX(0, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
> RK2928_MISC_CON, 14, 1, MFLAGS),

Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

From: Justin Swartz <justin.swartz@risingedge.co.za>

Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
a few hdmi pinctrl entries to allow for HDMI output.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[added assigned-clock settings for hdmiphy output]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk322x.dtsi | 83 +++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index da102fff96a2..148f9b5157ea 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -143,6 +143,11 @@
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	i2s1: i2s1@100b0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100b0000 0x4000>;
@@ -529,6 +534,17 @@
 		status = "disabled";
 	};
 
+	hdmi_phy: hdmi-phy@12030000 {
+		compatible = "rockchip,rk3228-hdmi-phy";
+		reg = <0x12030000 0x10000>;
+		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		#clock-cells = <0>;
+		clock-output-names = "hdmiphy_phy";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	gpu: gpu@20000000 {
 		compatible = "rockchip,rk3228-mali", "arm,mali-400";
 		reg = <0x20000000 0x10000>;
@@ -572,6 +588,28 @@
 		status = "disabled";
 	};
 
+	vop: vop@20050000 {
+		compatible = "rockchip,rk3228-vop";
+		reg = <0x20050000 0x1ffc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
 	vop_mmu: iommu@20053f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
@@ -594,6 +632,36 @@
 		status = "disabled";
 	};
 
+	hdmi: hdmi@200a0000 {
+		compatible = "rockchip,rk3228-dw-hdmi";
+		reg = <0x200a0000 0x20000>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_HDMI_PHY>;
+		assigned-clock-parents = <&hdmi_phy>;
+		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "isfr", "iahb", "cec";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+		resets = <&cru SRST_HDMI_P>;
+		reset-names = "hdmi";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vop: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+		};
+	};
+
 	sdmmc: dwmmc@30000000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30000000 0x4000>;
@@ -922,6 +990,21 @@
 			};
 		};
 
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>;
+			};
+
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+						<0 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
-- 
2.20.1

[PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

From: Justin Swartz <justin.swartz@risingedge.co.za>

Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
a few hdmi pinctrl entries to allow for HDMI output.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[added assigned-clock settings for hdmiphy output]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk322x.dtsi | 83 +++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index da102fff96a2..148f9b5157ea 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -143,6 +143,11 @@
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	i2s1: i2s1@100b0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100b0000 0x4000>;
@@ -529,6 +534,17 @@
 		status = "disabled";
 	};
 
+	hdmi_phy: hdmi-phy@12030000 {
+		compatible = "rockchip,rk3228-hdmi-phy";
+		reg = <0x12030000 0x10000>;
+		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		#clock-cells = <0>;
+		clock-output-names = "hdmiphy_phy";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	gpu: gpu@20000000 {
 		compatible = "rockchip,rk3228-mali", "arm,mali-400";
 		reg = <0x20000000 0x10000>;
@@ -572,6 +588,28 @@
 		status = "disabled";
 	};
 
+	vop: vop@20050000 {
+		compatible = "rockchip,rk3228-vop";
+		reg = <0x20050000 0x1ffc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
 	vop_mmu: iommu@20053f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
@@ -594,6 +632,36 @@
 		status = "disabled";
 	};
 
+	hdmi: hdmi@200a0000 {
+		compatible = "rockchip,rk3228-dw-hdmi";
+		reg = <0x200a0000 0x20000>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_HDMI_PHY>;
+		assigned-clock-parents = <&hdmi_phy>;
+		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "isfr", "iahb", "cec";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+		resets = <&cru SRST_HDMI_P>;
+		reset-names = "hdmi";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vop: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+		};
+	};
+
 	sdmmc: dwmmc@30000000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30000000 0x4000>;
@@ -922,6 +990,21 @@
 			};
 		};
 
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>;
+			};
+
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+						<0 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Stephen Boyd]

Quoting Heiko Stuebner (2019-06-14 09:54:53)
> From: Justin Swartz <justin.swartz@risingedge.co.za>
> 
> Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
> a few hdmi pinctrl entries to allow for HDMI output.
> 
> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
> [added assigned-clock settings for hdmiphy output]
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm/boot/dts/rk322x.dtsi | 83 +++++++++++++++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
> index da102fff96a2..148f9b5157ea 100644
> --- a/arch/arm/boot/dts/rk322x.dtsi
> +++ b/arch/arm/boot/dts/rk322x.dtsi
> @@ -143,6 +143,11 @@
>                 #clock-cells = <0>;
>         };
>  
> +       display_subsystem: display-subsystem {
> +               compatible = "rockchip,display-subsystem";
> +               ports = <&vop_out>;
> +       };
> +

What is this? It doesn't have a reg property so it looks like a virtual
device. Why is it in DT?

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Stephen Boyd]

Quoting Heiko Stuebner (2019-06-14 09:54:53)
> From: Justin Swartz <justin.swartz@risingedge.co.za>
> 
> Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
> a few hdmi pinctrl entries to allow for HDMI output.
> 
> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
> [added assigned-clock settings for hdmiphy output]
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm/boot/dts/rk322x.dtsi | 83 +++++++++++++++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
> index da102fff96a2..148f9b5157ea 100644
> --- a/arch/arm/boot/dts/rk322x.dtsi
> +++ b/arch/arm/boot/dts/rk322x.dtsi
> @@ -143,6 +143,11 @@
>                 #clock-cells = <0>;
>         };
>  
> +       display_subsystem: display-subsystem {
> +               compatible = "rockchip,display-subsystem";
> +               ports = <&vop_out>;
> +       };
> +

What is this? It doesn't have a reg property so it looks like a virtual
device. Why is it in DT?


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Stephen Boyd]

Quoting Heiko Stuebner (2019-06-14 09:54:53)
> From: Justin Swartz <justin.swartz@risingedge.co.za>
> 
> Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
> a few hdmi pinctrl entries to allow for HDMI output.
> 
> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
> [added assigned-clock settings for hdmiphy output]
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm/boot/dts/rk322x.dtsi | 83 +++++++++++++++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
> index da102fff96a2..148f9b5157ea 100644
> --- a/arch/arm/boot/dts/rk322x.dtsi
> +++ b/arch/arm/boot/dts/rk322x.dtsi
> @@ -143,6 +143,11 @@
>                 #clock-cells = <0>;
>         };
>  
> +       display_subsystem: display-subsystem {
> +               compatible = "rockchip,display-subsystem";
> +               ports = <&vop_out>;
> +       };
> +

What is this? It doesn't have a reg property so it looks like a virtual
device. Why is it in DT?

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Justin Swartz]

Hi Stephen,

On 2019-06-14 19:45, Stephen Boyd wrote:

>> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
>> b/arch/arm/boot/dts/rk322x.dtsi
>> index da102fff96a2..148f9b5157ea 100644
>> --- a/arch/arm/boot/dts/rk322x.dtsi
>> +++ b/arch/arm/boot/dts/rk322x.dtsi
>> @@ -143,6 +143,11 @@
>> #clock-cells = <0>;
>> };
>> 
>> +       display_subsystem: display-subsystem {
>> +               compatible = "rockchip,display-subsystem";
>> +               ports = <&vop_out>;
>> +       };
>> +
> 
> What is this? It doesn't have a reg property so it looks like a virtual
> device. Why is it in DT?

This is a virtual device.

I assumed it would be acceptable to it find in a device tree due to 
binding documentation, 
"Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
which states:

<quote>
The Rockchip DRM master device is a virtual device needed to list all
vop devices or other display interface nodes that comprise the
graphics subsystem.
</quote>

Without the "display_subsystem" device node, the HDMI PHY and 
rockchipdrmfb frame buffer device are not initialized.

Perhaps I should have included this in my commit message? :)

Regards
Justin

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Justin Swartz]

Hi Stephen,

On 2019-06-14 19:45, Stephen Boyd wrote:

>> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
>> b/arch/arm/boot/dts/rk322x.dtsi
>> index da102fff96a2..148f9b5157ea 100644
>> --- a/arch/arm/boot/dts/rk322x.dtsi
>> +++ b/arch/arm/boot/dts/rk322x.dtsi
>> @@ -143,6 +143,11 @@
>> #clock-cells = <0>;
>> };
>> 
>> +       display_subsystem: display-subsystem {
>> +               compatible = "rockchip,display-subsystem";
>> +               ports = <&vop_out>;
>> +       };
>> +
> 
> What is this? It doesn't have a reg property so it looks like a virtual
> device. Why is it in DT?

This is a virtual device.

I assumed it would be acceptable to it find in a device tree due to 
binding documentation, 
"Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
which states:

<quote>
The Rockchip DRM master device is a virtual device needed to list all
vop devices or other display interface nodes that comprise the
graphics subsystem.
</quote>

Without the "display_subsystem" device node, the HDMI PHY and 
rockchipdrmfb frame buffer device are not initialized.

Perhaps I should have included this in my commit message? :)

Regards
Justin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Justin Swartz]

Hi Stephen,

On 2019-06-14 19:45, Stephen Boyd wrote:

>> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
>> b/arch/arm/boot/dts/rk322x.dtsi
>> index da102fff96a2..148f9b5157ea 100644
>> --- a/arch/arm/boot/dts/rk322x.dtsi
>> +++ b/arch/arm/boot/dts/rk322x.dtsi
>> @@ -143,6 +143,11 @@
>> #clock-cells = <0>;
>> };
>> 
>> +       display_subsystem: display-subsystem {
>> +               compatible = "rockchip,display-subsystem";
>> +               ports = <&vop_out>;
>> +       };
>> +
> 
> What is this? It doesn't have a reg property so it looks like a virtual
> device. Why is it in DT?

This is a virtual device.

I assumed it would be acceptable to it find in a device tree due to 
binding documentation, 
"Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
which states:

<quote>
The Rockchip DRM master device is a virtual device needed to list all
vop devices or other display interface nodes that comprise the
graphics subsystem.
</quote>

Without the "display_subsystem" device node, the HDMI PHY and 
rockchipdrmfb frame buffer device are not initialized.

Perhaps I should have included this in my commit message? :)

Regards
Justin

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> On 2019-06-14 19:45, Stephen Boyd wrote:
> >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> >> b/arch/arm/boot/dts/rk322x.dtsi
> >> index da102fff96a2..148f9b5157ea 100644
> >> --- a/arch/arm/boot/dts/rk322x.dtsi
> >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> >> @@ -143,6 +143,11 @@
> >> #clock-cells = <0>;
> >> };
> >> 
> >> +       display_subsystem: display-subsystem {
> >> +               compatible = "rockchip,display-subsystem";
> >> +               ports = <&vop_out>;
> >> +       };
> >> +
> > 
> > What is this? It doesn't have a reg property so it looks like a virtual
> > device. Why is it in DT?
> 
> This is a virtual device.
> 
> I assumed it would be acceptable to it find in a device tree due to 
> binding documentation, 
> "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> which states:
> 
> <quote>
> The Rockchip DRM master device is a virtual device needed to list all
> vop devices or other display interface nodes that comprise the
> graphics subsystem.
> </quote>
> 
> Without the "display_subsystem" device node, the HDMI PHY and 
> rockchipdrmfb frame buffer device are not initialized.
> 
> Perhaps I should have included this in my commit message? :)

As Justin said, that is very much common as the root of the components
that make up the drm device and pretty much common in a lot of devicetrees
for the last 5 years and longer ;-) .

Also gpio-keys also don't have a reg property ;-) .

Heiko 

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> On 2019-06-14 19:45, Stephen Boyd wrote:
> >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> >> b/arch/arm/boot/dts/rk322x.dtsi
> >> index da102fff96a2..148f9b5157ea 100644
> >> --- a/arch/arm/boot/dts/rk322x.dtsi
> >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> >> @@ -143,6 +143,11 @@
> >> #clock-cells = <0>;
> >> };
> >> 
> >> +       display_subsystem: display-subsystem {
> >> +               compatible = "rockchip,display-subsystem";
> >> +               ports = <&vop_out>;
> >> +       };
> >> +
> > 
> > What is this? It doesn't have a reg property so it looks like a virtual
> > device. Why is it in DT?
> 
> This is a virtual device.
> 
> I assumed it would be acceptable to it find in a device tree due to 
> binding documentation, 
> "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> which states:
> 
> <quote>
> The Rockchip DRM master device is a virtual device needed to list all
> vop devices or other display interface nodes that comprise the
> graphics subsystem.
> </quote>
> 
> Without the "display_subsystem" device node, the HDMI PHY and 
> rockchipdrmfb frame buffer device are not initialized.
> 
> Perhaps I should have included this in my commit message? :)

As Justin said, that is very much common as the root of the components
that make up the drm device and pretty much common in a lot of devicetrees
for the last 5 years and longer ;-) .

Also gpio-keys also don't have a reg property ;-) .

Heiko 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> On 2019-06-14 19:45, Stephen Boyd wrote:
> >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> >> b/arch/arm/boot/dts/rk322x.dtsi
> >> index da102fff96a2..148f9b5157ea 100644
> >> --- a/arch/arm/boot/dts/rk322x.dtsi
> >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> >> @@ -143,6 +143,11 @@
> >> #clock-cells = <0>;
> >> };
> >> 
> >> +       display_subsystem: display-subsystem {
> >> +               compatible = "rockchip,display-subsystem";
> >> +               ports = <&vop_out>;
> >> +       };
> >> +
> > 
> > What is this? It doesn't have a reg property so it looks like a virtual
> > device. Why is it in DT?
> 
> This is a virtual device.
> 
> I assumed it would be acceptable to it find in a device tree due to 
> binding documentation, 
> "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> which states:
> 
> <quote>
> The Rockchip DRM master device is a virtual device needed to list all
> vop devices or other display interface nodes that comprise the
> graphics subsystem.
> </quote>
> 
> Without the "display_subsystem" device node, the HDMI PHY and 
> rockchipdrmfb frame buffer device are not initialized.
> 
> Perhaps I should have included this in my commit message? :)

As Justin said, that is very much common as the root of the components
that make up the drm device and pretty much common in a lot of devicetrees
for the last 5 years and longer ;-) .

Also gpio-keys also don't have a reg property ;-) .

Heiko 

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Stephen Boyd]

Quoting Heiko Stuebner (2019-06-14 12:33:12)
> Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> > On 2019-06-14 19:45, Stephen Boyd wrote:
> > >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> > >> b/arch/arm/boot/dts/rk322x.dtsi
> > >> index da102fff96a2..148f9b5157ea 100644
> > >> --- a/arch/arm/boot/dts/rk322x.dtsi
> > >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> > >> @@ -143,6 +143,11 @@
> > >> #clock-cells = <0>;
> > >> };
> > >> 
> > >> +       display_subsystem: display-subsystem {
> > >> +               compatible = "rockchip,display-subsystem";
> > >> +               ports = <&vop_out>;
> > >> +       };
> > >> +
> > > 
> > > What is this? It doesn't have a reg property so it looks like a virtual
> > > device. Why is it in DT?
> > 
> > This is a virtual device.
> > 
> > I assumed it would be acceptable to it find in a device tree due to 
> > binding documentation, 
> > "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> > which states:
> > 
> > <quote>
> > The Rockchip DRM master device is a virtual device needed to list all
> > vop devices or other display interface nodes that comprise the
> > graphics subsystem.
> > </quote>
> > 
> > Without the "display_subsystem" device node, the HDMI PHY and 
> > rockchipdrmfb frame buffer device are not initialized.
> > 
> > Perhaps I should have included this in my commit message? :)
> 
> As Justin said, that is very much common as the root of the components
> that make up the drm device and pretty much common in a lot of devicetrees
> for the last 5 years and longer ;-) .
> 
> Also gpio-keys also don't have a reg property ;-) .
> 

Do you have a SoC node? If so, this virtual device should live in the
root, away from the nodes that have reg properties and are thus in the
SoC node.

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Stephen Boyd]

Quoting Heiko Stuebner (2019-06-14 12:33:12)
> Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> > On 2019-06-14 19:45, Stephen Boyd wrote:
> > >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> > >> b/arch/arm/boot/dts/rk322x.dtsi
> > >> index da102fff96a2..148f9b5157ea 100644
> > >> --- a/arch/arm/boot/dts/rk322x.dtsi
> > >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> > >> @@ -143,6 +143,11 @@
> > >> #clock-cells = <0>;
> > >> };
> > >> 
> > >> +       display_subsystem: display-subsystem {
> > >> +               compatible = "rockchip,display-subsystem";
> > >> +               ports = <&vop_out>;
> > >> +       };
> > >> +
> > > 
> > > What is this? It doesn't have a reg property so it looks like a virtual
> > > device. Why is it in DT?
> > 
> > This is a virtual device.
> > 
> > I assumed it would be acceptable to it find in a device tree due to 
> > binding documentation, 
> > "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> > which states:
> > 
> > <quote>
> > The Rockchip DRM master device is a virtual device needed to list all
> > vop devices or other display interface nodes that comprise the
> > graphics subsystem.
> > </quote>
> > 
> > Without the "display_subsystem" device node, the HDMI PHY and 
> > rockchipdrmfb frame buffer device are not initialized.
> > 
> > Perhaps I should have included this in my commit message? :)
> 
> As Justin said, that is very much common as the root of the components
> that make up the drm device and pretty much common in a lot of devicetrees
> for the last 5 years and longer ;-) .
> 
> Also gpio-keys also don't have a reg property ;-) .
> 

Do you have a SoC node? If so, this virtual device should live in the
root, away from the nodes that have reg properties and are thus in the
SoC node.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

Stephen,

Am Freitag, 14. Juni 2019, 22:36:09 CEST schrieb Stephen Boyd:
> Quoting Heiko Stuebner (2019-06-14 12:33:12)
> > Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> > > On 2019-06-14 19:45, Stephen Boyd wrote:
> > > >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> > > >> b/arch/arm/boot/dts/rk322x.dtsi
> > > >> index da102fff96a2..148f9b5157ea 100644
> > > >> --- a/arch/arm/boot/dts/rk322x.dtsi
> > > >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> > > >> @@ -143,6 +143,11 @@
> > > >> #clock-cells = <0>;
> > > >> };
> > > >> 
> > > >> +       display_subsystem: display-subsystem {
> > > >> +               compatible = "rockchip,display-subsystem";
> > > >> +               ports = <&vop_out>;
> > > >> +       };
> > > >> +
> > > > 
> > > > What is this? It doesn't have a reg property so it looks like a virtual
> > > > device. Why is it in DT?
> > > 
> > > This is a virtual device.
> > > 
> > > I assumed it would be acceptable to it find in a device tree due to 
> > > binding documentation, 
> > > "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> > > which states:
> > > 
> > > <quote>
> > > The Rockchip DRM master device is a virtual device needed to list all
> > > vop devices or other display interface nodes that comprise the
> > > graphics subsystem.
> > > </quote>
> > > 
> > > Without the "display_subsystem" device node, the HDMI PHY and 
> > > rockchipdrmfb frame buffer device are not initialized.
> > > 
> > > Perhaps I should have included this in my commit message? :)
> > 
> > As Justin said, that is very much common as the root of the components
> > that make up the drm device and pretty much common in a lot of devicetrees
> > for the last 5 years and longer ;-) .
> > 
> > Also gpio-keys also don't have a reg property ;-) .
> > 
> 
> Do you have a SoC node? If so, this virtual device should live in the
> root, away from the nodes that have reg properties and are thus in the
> SoC node.

no we don't have any soc node and that display-subsystem is really the
same on _all_ currently supported Rockchip socs ... has gone through
dt-reviews numerous times for multiple socs, so I'm somewhat
confident that we're not doing something terrible wrong.

Heiko

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

Stephen,

Am Freitag, 14. Juni 2019, 22:36:09 CEST schrieb Stephen Boyd:
> Quoting Heiko Stuebner (2019-06-14 12:33:12)
> > Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> > > On 2019-06-14 19:45, Stephen Boyd wrote:
> > > >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> > > >> b/arch/arm/boot/dts/rk322x.dtsi
> > > >> index da102fff96a2..148f9b5157ea 100644
> > > >> --- a/arch/arm/boot/dts/rk322x.dtsi
> > > >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> > > >> @@ -143,6 +143,11 @@
> > > >> #clock-cells = <0>;
> > > >> };
> > > >> 
> > > >> +       display_subsystem: display-subsystem {
> > > >> +               compatible = "rockchip,display-subsystem";
> > > >> +               ports = <&vop_out>;
> > > >> +       };
> > > >> +
> > > > 
> > > > What is this? It doesn't have a reg property so it looks like a virtual
> > > > device. Why is it in DT?
> > > 
> > > This is a virtual device.
> > > 
> > > I assumed it would be acceptable to it find in a device tree due to 
> > > binding documentation, 
> > > "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> > > which states:
> > > 
> > > <quote>
> > > The Rockchip DRM master device is a virtual device needed to list all
> > > vop devices or other display interface nodes that comprise the
> > > graphics subsystem.
> > > </quote>
> > > 
> > > Without the "display_subsystem" device node, the HDMI PHY and 
> > > rockchipdrmfb frame buffer device are not initialized.
> > > 
> > > Perhaps I should have included this in my commit message? :)
> > 
> > As Justin said, that is very much common as the root of the components
> > that make up the drm device and pretty much common in a lot of devicetrees
> > for the last 5 years and longer ;-) .
> > 
> > Also gpio-keys also don't have a reg property ;-) .
> > 
> 
> Do you have a SoC node? If so, this virtual device should live in the
> root, away from the nodes that have reg properties and are thus in the
> SoC node.

no we don't have any soc node and that display-subsystem is really the
same on _all_ currently supported Rockchip socs ... has gone through
dt-reviews numerous times for multiple socs, so I'm somewhat
confident that we're not doing something terrible wrong.

Heiko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] ARM: dts: rockchip: add display nodes for rk322x

[Heiko Stuebner]

Stephen,

Am Freitag, 14. Juni 2019, 22:36:09 CEST schrieb Stephen Boyd:
> Quoting Heiko Stuebner (2019-06-14 12:33:12)
> > Am Freitag, 14. Juni 2019, 20:32:35 CEST schrieb Justin Swartz:
> > > On 2019-06-14 19:45, Stephen Boyd wrote:
> > > >> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> > > >> b/arch/arm/boot/dts/rk322x.dtsi
> > > >> index da102fff96a2..148f9b5157ea 100644
> > > >> --- a/arch/arm/boot/dts/rk322x.dtsi
> > > >> +++ b/arch/arm/boot/dts/rk322x.dtsi
> > > >> @@ -143,6 +143,11 @@
> > > >> #clock-cells = <0>;
> > > >> };
> > > >> 
> > > >> +       display_subsystem: display-subsystem {
> > > >> +               compatible = "rockchip,display-subsystem";
> > > >> +               ports = <&vop_out>;
> > > >> +       };
> > > >> +
> > > > 
> > > > What is this? It doesn't have a reg property so it looks like a virtual
> > > > device. Why is it in DT?
> > > 
> > > This is a virtual device.
> > > 
> > > I assumed it would be acceptable to it find in a device tree due to 
> > > binding documentation, 
> > > "Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt, 
> > > which states:
> > > 
> > > <quote>
> > > The Rockchip DRM master device is a virtual device needed to list all
> > > vop devices or other display interface nodes that comprise the
> > > graphics subsystem.
> > > </quote>
> > > 
> > > Without the "display_subsystem" device node, the HDMI PHY and 
> > > rockchipdrmfb frame buffer device are not initialized.
> > > 
> > > Perhaps I should have included this in my commit message? :)
> > 
> > As Justin said, that is very much common as the root of the components
> > that make up the drm device and pretty much common in a lot of devicetrees
> > for the last 5 years and longer ;-) .
> > 
> > Also gpio-keys also don't have a reg property ;-) .
> > 
> 
> Do you have a SoC node? If so, this virtual device should live in the
> root, away from the nodes that have reg properties and are thus in the
> SoC node.

no we don't have any soc node and that display-subsystem is really the
same on _all_ currently supported Rockchip socs ... has gone through
dt-reviews numerous times for multiple socs, so I'm somewhat
confident that we're not doing something terrible wrong.

Heiko

[PATCH 4/4] ARM: dts: rockchip: fix vop iommu-cells on rk322x

[Heiko Stuebner]

From: Justin Swartz <justin.swartz@risingedge.co.za>

iommu-cells obviously needs to start with a "#".

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk322x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 148f9b5157ea..340ed6ccb08f 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -617,7 +617,7 @@
 		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
-- 
2.20.1

[PATCH 4/4] ARM: dts: rockchip: fix vop iommu-cells on rk322x

[Heiko Stuebner]

From: Justin Swartz <justin.swartz@risingedge.co.za>

iommu-cells obviously needs to start with a "#".

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk322x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 148f9b5157ea..340ed6ccb08f 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -617,7 +617,7 @@
 		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/4] hdmi on rk3229

[Heiko Stuebner]

Am Freitag, 14. Juni 2019, 18:54:50 CEST schrieb Heiko Stuebner:
> The hdmiphy needs its clock reparented to the actual hdmiphy-pll
> that gets generated in the hdmiphy itself.
> 
> This incorporates adapted versions of Justin's original patches
> and also the needed clock adaptions to make it possible to
> reparent the hdmiphy clock.
> 
> Heiko Stuebner (2):
>   clk: rockchip: add clock id for hdmi_phy special clock
>   clk: rockchip: export HDMIPHY clock
> 
> Justin Swartz (2):
>   ARM: dts: rockchip: add display nodes for rk322x
>   ARM: dts: rockchip: fix vop iommu-cells on rk322x

applied all 4 to relevant branches for 5.3

Cheers
Heiko

Re: [PATCH 0/4] hdmi on rk3229

[Heiko Stuebner]

Am Freitag, 14. Juni 2019, 18:54:50 CEST schrieb Heiko Stuebner:
> The hdmiphy needs its clock reparented to the actual hdmiphy-pll
> that gets generated in the hdmiphy itself.
> 
> This incorporates adapted versions of Justin's original patches
> and also the needed clock adaptions to make it possible to
> reparent the hdmiphy clock.
> 
> Heiko Stuebner (2):
>   clk: rockchip: add clock id for hdmi_phy special clock
>   clk: rockchip: export HDMIPHY clock
> 
> Justin Swartz (2):
>   ARM: dts: rockchip: add display nodes for rk322x
>   ARM: dts: rockchip: fix vop iommu-cells on rk322x

applied all 4 to relevant branches for 5.3

Cheers
Heiko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel