All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/1] dt-bindings: stm32: serial: Add optional reset
@ 2019-05-24 15:30 ` Erwan Le Ray
  0 siblings, 0 replies; 6+ messages in thread
From: Erwan Le Ray @ 2019-05-24 15:30 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre Torgue
  Cc: linux-serial, devicetree, linux-stm32, linux-arm-kernel,
	linux-kernel, Fabrice Gasnier, Erwan Le Ray

STM32 serial can be reset via reset controller.
Add an optional reset property to stm32 usart bindings.

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index 9d3efed..a6b1948 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -13,6 +13,7 @@ Required properties:
 - clocks: The input clock of the USART instance
 
 Optional properties:
+- resets: Must contain the phandle to the reset controller.
 - pinctrl: The reference on the pins configuration
 - st,hw-flow-ctrl: bool flag to enable hardware flow control.
 - rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low,
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2019-06-14 17:52 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-05-24 15:30 [PATCH 1/1] dt-bindings: stm32: serial: Add optional reset Erwan Le Ray
2019-05-24 15:30 ` Erwan Le Ray
2019-05-24 15:30 ` Erwan Le Ray
2019-06-14 17:51 ` Rob Herring
2019-06-14 17:51   ` Rob Herring
2019-06-14 17:51   ` Rob Herring

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.