From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>,
dri-devel@lists.freedesktop.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1] backlight: gpio_backlight: Enable ACPI enumeration
Date: Wed, 19 Jun 2019 18:21:27 +0300 [thread overview]
Message-ID: <20190619152127.11670-1-andriy.shevchenko@linux.intel.com> (raw)
ACPI allows to enumerate specific devices by using compatible strings.
Enable that enumeration for GPIO based backlight devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/video/backlight/gpio_backlight.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index e470da95d806..05c12df62b27 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -18,6 +18,7 @@
#include <linux/of_gpio.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
struct gpio_backlight {
@@ -61,11 +62,10 @@ static int gpio_backlight_probe_dt(struct platform_device *pdev,
struct gpio_backlight *gbl)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
enum gpiod_flags flags;
int ret;
- gbl->def_value = of_property_read_bool(np, "default-on");
+ gbl->def_value = device_property_read_bool(dev, "default-on");
flags = gbl->def_value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
gbl->gpiod = devm_gpiod_get(dev, NULL, flags);
@@ -89,26 +89,19 @@ static int gpio_backlight_probe(struct platform_device *pdev)
struct backlight_properties props;
struct backlight_device *bl;
struct gpio_backlight *gbl;
- struct device_node *np = pdev->dev.of_node;
int ret;
- if (!pdata && !np) {
- dev_err(&pdev->dev,
- "failed to find platform data or device tree node.\n");
- return -ENODEV;
- }
-
gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
if (gbl == NULL)
return -ENOMEM;
gbl->dev = &pdev->dev;
- if (np) {
+ if (pdev->dev.fwnode) {
ret = gpio_backlight_probe_dt(pdev, gbl);
if (ret)
return ret;
- } else {
+ } else if (pdata) {
/*
* Legacy platform data GPIO retrieveal. Do not expand
* the use of this code path, currently only used by one
@@ -129,6 +122,10 @@ static int gpio_backlight_probe(struct platform_device *pdev)
gbl->gpiod = gpio_to_desc(pdata->gpio);
if (!gbl->gpiod)
return -EINVAL;
+ } else {
+ dev_err(&pdev->dev,
+ "failed to find platform data or device tree node.\n");
+ return -ENODEV;
}
memset(&props, 0, sizeof(props));
@@ -149,19 +146,17 @@ static int gpio_backlight_probe(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_OF
static struct of_device_id gpio_backlight_of_match[] = {
{ .compatible = "gpio-backlight" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, gpio_backlight_of_match);
-#endif
static struct platform_driver gpio_backlight_driver = {
.driver = {
.name = "gpio-backlight",
- .of_match_table = of_match_ptr(gpio_backlight_of_match),
+ .of_match_table = gpio_backlight_of_match,
},
.probe = gpio_backlight_probe,
};
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-06-19 15:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-19 15:21 Andy Shevchenko [this message]
2019-06-20 14:12 ` [PATCH v1] backlight: gpio_backlight: Enable ACPI enumeration Daniel Thompson
2019-06-20 15:12 ` Andy Shevchenko
2019-06-26 10:57 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190619152127.11670-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=daniel.thompson@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jingoohan1@gmail.com \
--cc=lee.jones@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.