All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Joseph Kogut <joseph.kogut@gmail.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Inki Dae <inki.dae@samsung.com>
Subject: [PATCH v2 3/7] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
Date: Fri, 21 Jun 2019 20:02:04 +0200	[thread overview]
Message-ID: <20190621180208.25361-3-krzk@kernel.org> (raw)
In-Reply-To: <20190621180208.25361-1-krzk@kernel.org>

Add nodes for GPU (Mali T760) to Exynos5433.  Missing element is the
cooling device.  Not tested on HW.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. None
---
 .../dts/exynos/exynos5433-tm2-common.dtsi     |  5 ++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi    | 51 +++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d2de16645e10..6f90b0e62cba 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -350,6 +350,11 @@
 	pinctrl-0 = <&te_irq>;
 };
 
+&gpu {
+	mali-supply = <&buck6_reg>;
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index d29d13f4694f..a76f620f7f35 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -249,6 +249,57 @@
 		};
 	};
 
+	gpu: gpu@14ac0000 {
+		compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+		reg = <0x14ac0000 0x5000>;
+		interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cmu_g3d CLK_ACLK_G3D>;
+		clock-names = "core";
+		power-domains = <&pd_g3d>;
+		operating-points-v2 = <&gpu_opp_table>;
+		status = "disabled";
+
+		gpu_opp_table: opp_table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp-350000000 {
+				opp-hz = /bits/ 64 <350000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-420000000 {
+				opp-hz = /bits/ 64 <420000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-500000000 {
+				opp-hz = /bits/ 64 <500000000>;
+				opp-microvolt = <1075000>;
+			};
+			opp-550000000 {
+				opp-hz = /bits/ 64 <550000000>;
+				opp-microvolt = <1125000>;
+			};
+			opp-600000000 {
+				opp-hz = /bits/ 64 <600000000>;
+				opp-microvolt = <1150000>;
+			};
+			opp-700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = <1150000>;
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci";
 		method = "smc";
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Joseph Kogut <joseph.kogut@gmail.com>,
	Inki Dae <inki.dae@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [PATCH v2 3/7] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
Date: Fri, 21 Jun 2019 20:02:04 +0200	[thread overview]
Message-ID: <20190621180208.25361-3-krzk@kernel.org> (raw)
In-Reply-To: <20190621180208.25361-1-krzk@kernel.org>

Add nodes for GPU (Mali T760) to Exynos5433.  Missing element is the
cooling device.  Not tested on HW.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. None
---
 .../dts/exynos/exynos5433-tm2-common.dtsi     |  5 ++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi    | 51 +++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d2de16645e10..6f90b0e62cba 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -350,6 +350,11 @@
 	pinctrl-0 = <&te_irq>;
 };
 
+&gpu {
+	mali-supply = <&buck6_reg>;
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index d29d13f4694f..a76f620f7f35 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -249,6 +249,57 @@
 		};
 	};
 
+	gpu: gpu@14ac0000 {
+		compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+		reg = <0x14ac0000 0x5000>;
+		interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cmu_g3d CLK_ACLK_G3D>;
+		clock-names = "core";
+		power-domains = <&pd_g3d>;
+		operating-points-v2 = <&gpu_opp_table>;
+		status = "disabled";
+
+		gpu_opp_table: opp_table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp-350000000 {
+				opp-hz = /bits/ 64 <350000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-420000000 {
+				opp-hz = /bits/ 64 <420000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-500000000 {
+				opp-hz = /bits/ 64 <500000000>;
+				opp-microvolt = <1075000>;
+			};
+			opp-550000000 {
+				opp-hz = /bits/ 64 <550000000>;
+				opp-microvolt = <1125000>;
+			};
+			opp-600000000 {
+				opp-hz = /bits/ 64 <600000000>;
+				opp-microvolt = <1150000>;
+			};
+			opp-700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = <1150000>;
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci";
 		method = "smc";
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-21 18:02 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-21 18:02 [PATCH v2 1/7] ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250 Krzysztof Kozlowski
2019-06-21 18:02 ` Krzysztof Kozlowski
2019-06-21 18:02 ` [PATCH v2 2/7] ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4 Krzysztof Kozlowski
2019-06-21 18:02   ` Krzysztof Kozlowski
2019-06-21 18:02 ` Krzysztof Kozlowski [this message]
2019-06-21 18:02   ` [PATCH v2 3/7] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433 Krzysztof Kozlowski
2019-06-21 18:02 ` [PATCH v2 4/7] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7 Krzysztof Kozlowski
2019-06-21 18:02   ` Krzysztof Kozlowski
2019-06-21 18:02 ` [PATCH v2 5/7] ARM: multi_v7_defconfig: Enable Panfrost and LIMA drivers Krzysztof Kozlowski
2019-06-21 18:02   ` Krzysztof Kozlowski
2019-06-21 18:02 ` [PATCH v2 6/7] ARM: exynos_defconfig: " Krzysztof Kozlowski
2019-06-21 18:02   ` Krzysztof Kozlowski
2019-06-21 18:02 ` [PATCH v2 7/7] arm64: defconfig: Enable Panfrost driver Krzysztof Kozlowski
2019-06-21 18:02   ` Krzysztof Kozlowski
2019-06-21 20:15   ` Vasily Khoruzhick
2019-06-21 20:15     ` Vasily Khoruzhick
2019-06-22  8:39     ` Krzysztof Kozlowski
2019-06-22  8:39       ` Krzysztof Kozlowski
2019-06-22 19:18   ` [PATCH v3] arm64: defconfig: Enable Panfrost and Lima drivers Krzysztof Kozlowski
2019-06-22 19:18     ` Krzysztof Kozlowski
2019-06-22 19:18     ` Krzysztof Kozlowski
2019-06-23  4:30     ` Chanwoo Choi
2019-06-23  4:30       ` Chanwoo Choi
2019-06-23 19:16       ` Krzysztof Kozlowski
2019-06-23 19:16         ` Krzysztof Kozlowski
2019-06-23 23:39         ` Chanwoo Choi
2019-06-23 23:39           ` Chanwoo Choi
2019-06-24  6:56           ` Krzysztof Kozlowski
2019-06-24  6:56             ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190621180208.25361-3-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=arnd@arndb.de \
    --cc=b.zolnierkie@samsung.com \
    --cc=catalin.marinas@arm.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=joseph.kogut@gmail.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.