Re: [PATCH v2 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Jun 17, 2019 at 08:30:24AM -0700, Andrey Smirnov wrote:
> Add support for ZII's i.MX7 based Remote Modem Unit 2 (RMU2) board.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Bob Langer <Bob.Langer@zii.aero>
> Cc: Liang Pan <Liang.Pan@zii.aero>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
> 
> Changes since [v1]:
> 
>     - Added missing #address-cells and #size-cells
>     
>     - Replaced reset-gpio -> reset-gpios
> 
> 
> [v1] lore.kernel.org/r/20190614080317.16850-1-andrew.smirnov@gmail.com
> 
>  arch/arm/boot/dts/Makefile           |   1 +
>  arch/arm/boot/dts/imx7d-zii-rmu2.dts | 361 +++++++++++++++++++++++++++
>  2 files changed, 362 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx7d-zii-rmu2.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5559028b770e..516e2912236d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -593,6 +593,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
>  	imx7d-sdb.dtb \
>  	imx7d-sdb-reva.dtb \
>  	imx7d-sdb-sht11.dtb \
> +	imx7d-zii-rmu2.dtb \
>  	imx7d-zii-rpu2.dtb \
>  	imx7s-colibri-eval-v3.dtb \
>  	imx7s-mba7.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
> new file mode 100644
> index 000000000000..e60b3232a090
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
> @@ -0,0 +1,361 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Device tree file for ZII's RMU2 board
> + *
> + * RMU - Remote Modem Unit
> + *
> + * Copyright (C) 2019 Zodiac Inflight Innovations
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/thermal/thermal.h>
> +#include "imx7d.dtsi"
> +
> +/ {
> +	model = "ZII RMU2 Board";
> +	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&pinctrl_leds_debug>;
> +		pinctrl-names = "default";
> +
> +		debug {
> +			label = "zii:green:debug1";
> +			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> +
> +&cpu0 {
> +	arm-supply = <&sw1a_reg>;
> +};
> +
> +&ecspi1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1>;
> +	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		spi-max-frequency = <20000000>;
> +		reg = <0>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet1>;
> +	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
> +			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
> +	assigned-clock-rates = <0>, <100000000>;
> +	phy-mode = "rgmii";
> +	phy-handle = <&fec1_phy>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		fec1_phy: phy@0 {

ethernet-phy for node name.

> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
> +				    <&pinctrl_enet1_phy_interrupt>;
> +			reg = <0>;
> +			interrupt-parent = <&gpio1>;
> +			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	pmic: pmic@8 {

Label can be more specific, so maybe:

	pfuze3000: pmic@8

> +		compatible = "fsl,pfuze3000";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1a {
> +				regulator-min-microvolt = <700000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1b {
> +				regulator-min-microvolt = <700000>;
> +				regulator-max-microvolt = <1475000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1850000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3 {
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <1650000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vldo1 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen2_reg: vldo2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen3_reg: vccsd {
> +				regulator-min-microvolt = <2850000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen4_reg: v33 {
> +				regulator-min-microvolt = <2850000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vldo3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vldo4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +
> +	eeprom@50 {
> +		compatible = "atmel,24c04";
> +		reg = <0x50>;
> +	};
> +
> +	eeprom@52 {
> +		compatible = "atmel,24c04";
> +		reg = <0x52>;
> +	};
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> +	status = "okay";
> +
> +	rave-sp {
> +		compatible = "zii,rave-sp-rdu2";
> +		current-speed = <1000000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		watchdog {
> +			compatible = "zii,rave-sp-watchdog";
> +		};
> +
> +		eeprom@a3 {
> +			compatible = "zii,rave-sp-eeprom";
> +			reg = <0xa3 0x4000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			zii,eeprom-name = "main-eeprom";
> +		};
> +	};
> +};
> +
> +&usbotg2 {
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	no-sdio;
> +	keep-power-in-suspend;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	no-sdio;
> +	no-sd;
> +	keep-power-in-suspend;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	status = "disabled";
> +};
> +
> +&snvs_rtc {
> +	status = "disabled";
> +};

Please sort it alphabetically in label name.

> +
> +&snvs_pwrkey {
> +	status = "disabled";
> +};

We already queued up the patch below to disable snvs_pwrkey by default.

https://lkml.org/lkml/2019/6/13/1170

> +
> +&iomuxc {
> +	pinctrl_ecspi1: ecspi1grp {
> +		fsl,pins = <
> +			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
> +			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
> +			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
> +			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
> +		>;
> +	};
> +
> +	pinctrl_enet1: enet1grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
> +			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
> +			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
> +			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
> +			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
> +			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
> +			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
> +			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
> +			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
> +			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
> +			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
> +			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
> +			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
> +			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
> +		>;
> +	};
> +
> +	pinctrl_enet1_phy_reset: enet1phyresetgrp {
> +		fsl,pins = <
> +			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
> +
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
> +			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_leds_debug: debuggrp {

ledsgrp?

Shawn

> +		fsl,pins = <
> +			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
> +		>;
> +	};
> +
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
> +			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
> +			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
> +			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
> +			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
> +			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
> +			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
> +			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
> +			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
> +			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
> +			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
> +			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
> +			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
> +			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
> +			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
> +			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
> +			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
> +			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
> +		>;
> +	};
> +};
> +
> +&iomuxc_lpsr {
> +	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
> +		fsl,phy = <
> +			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
> +		>;
> +	};
> +};
> -- 
> 2.21.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel