All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH] arm64: dts: meson-g12a: add missing dwc2 phy-names
Date: Tue, 25 Jun 2019 14:36:47 +0200	[thread overview]
Message-ID: <20190625123647.26117-1-narmstrong@baylibre.com> (raw)

The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.

By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.

The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".

Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20..1785552d450c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2386,6 +2386,7 @@
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 				clock-names = "ddr";
 				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
 				g-rx-fifo-size = <192>;
 				g-np-tx-fifo-size = <128>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH] arm64: dts: meson-g12a: add missing dwc2 phy-names
Date: Tue, 25 Jun 2019 14:36:47 +0200	[thread overview]
Message-ID: <20190625123647.26117-1-narmstrong@baylibre.com> (raw)

The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.

By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.

The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".

Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20..1785552d450c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2386,6 +2386,7 @@
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 				clock-names = "ddr";
 				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
 				g-rx-fifo-size = <192>;
 				g-np-tx-fifo-size = <128>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH] arm64: dts: meson-g12a: add missing dwc2 phy-names
Date: Tue, 25 Jun 2019 14:36:47 +0200	[thread overview]
Message-ID: <20190625123647.26117-1-narmstrong@baylibre.com> (raw)

The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.

By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.

The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".

Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20..1785552d450c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2386,6 +2386,7 @@
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 				clock-names = "ddr";
 				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
 				g-rx-fifo-size = <192>;
 				g-np-tx-fifo-size = <128>;
-- 
2.21.0


             reply	other threads:[~2019-06-25 12:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-25 12:36 Neil Armstrong [this message]
2019-06-25 12:36 ` [PATCH] arm64: dts: meson-g12a: add missing dwc2 phy-names Neil Armstrong
2019-06-25 12:36 ` Neil Armstrong
2019-06-28 18:41 ` Kevin Hilman
2019-06-28 18:41   ` Kevin Hilman
2019-06-28 18:41   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190625123647.26117-1-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.