Re: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c

From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Fabien Dessenne <fabien.dessenne@st.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	devicetree@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	Loic Pallardy <loic.pallardy@st.com>,
	Arnaud Pouliquen <arnaud.pouliquen@st.com>,
	Ludovic Barre <ludovic.barre@st.com>,
	Benjamin Gaignard <benjamin.gaignard@st.com>
Subject: Re: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c
Date: Sat, 29 Jun 2019 21:03:22 -0700	[thread overview]
Message-ID: <20190630040322.GH23094@builder> (raw)
In-Reply-To: <1557822423-22658-1-git-send-email-fabien.dessenne@st.com>

On Tue 14 May 01:26 PDT 2019, Fabien Dessenne wrote:

> STMicrolectronics STM32MP157 MPU are based on a Dual Arm Cortex-A7 core and a
> Cortex-M4.
> This patchset adds the support of the stm32_rproc driver allowing to control
> the M4 remote processor.
> 

Applied patches 1 through 3, with a few fixes of compile warnings on
data types in dev_dbg, in patch 3.

Thanks,
Bjorn

> Changes since v3:
> -Replaced "st,auto_boot" with "st,auto-boot"
> -Update m4 reg values and align with unit-address
> 
> Changes since v2:
> - Clarified "reg" description
> - Change m4 unit adress to 38000000
> - Renamed "auto_boot" in "st,auto-boot"
> 
> Changes since v1:
> - Gave details about the memory mapping (in bindings).
> - Used 'dma-ranges' instead of 'ranges'.
> - Updated the 'compatible' property.
> - Remove the 'recovery', 'reset-names' and 'interrupt-names' properties.
> - Clarified why / when mailboxes are optional.
> 
> Fabien Dessenne (8):
>   dt-bindings: stm32: add bindings for ML-AHB interconnect
>   dt-bindings: remoteproc: add bindings for stm32 remote processor
>     driver
>   remoteproc: stm32: add an ST stm32_rproc driver
>   ARM: dts: stm32: add m4 remoteproc support on STM32MP157c
>   ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1
>   ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1
>   ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1
>   ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1
> 
>  .../devicetree/bindings/arm/stm32/mlahb.txt        |  37 ++
>  .../devicetree/bindings/remoteproc/stm32-rproc.txt |  63 +++
>  arch/arm/boot/dts/stm32mp157a-dk1.dts              |  52 ++
>  arch/arm/boot/dts/stm32mp157c-ed1.dts              |  52 ++
>  arch/arm/boot/dts/stm32mp157c.dtsi                 |  20 +
>  drivers/remoteproc/Kconfig                         |  15 +
>  drivers/remoteproc/Makefile                        |   1 +
>  drivers/remoteproc/stm32_rproc.c                   | 628 +++++++++++++++++++++
>  8 files changed, 868 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
>  create mode 100644 drivers/remoteproc/stm32_rproc.c
> 
> -- 
> 2.7.4
> 