From: Jonathan Chocron <jonnyc@amazon.com>
To: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
<jingoohan1@gmail.com>, <gustavo.pimentel@synopsys.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <dwmw@amazon.co.uk>, <benh@kernel.crashing.org>,
<alisaidi@amazon.com>, <ronenk@amazon.com>, <barakw@amazon.com>,
<talel@amazon.com>, <hanochu@amazon.com>, <hhhawa@amazon.com>,
<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <jonnyc@amazon.com>
Subject: [PATCH 5/8] dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
Date: Thu, 11 Jul 2019 17:45:41 +0300 [thread overview]
Message-ID: <20190710164519.17883-6-jonnyc@amazon.com> (raw)
In-Reply-To: <20190710164519.17883-1-jonnyc@amazon.com>
Document Amazon's Annapurna Labs PCIe host bridge.
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
---
.../devicetree/bindings/pci/pcie-al.txt | 45 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/pcie-al.txt
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
new file mode 100644
index 000000000000..d92cc529490e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -0,0 +1,45 @@
+* Amazon Annapurna Labs PCIe host bridge
+
+Annapurna Labs' PCIe Host Controller is based on the Synopsys DesignWare
+PCI core.
+It shares common functions with the PCIe DesignWare core driver and inherits
+common properties defined in Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Properties of the host controller node that differ from it are:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value should contain
+ - "amazon,al-pcie"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "config" PCIe ECAM space
+ - "controller" AL proprietary registers
+ - "dbi" Designware PCIe registers
+
+Example:
+
+ pcie-external0 {
+ compatible = "amazon,al-pcie";
+ reg = <0x0 0xfb600000 0x0 0x00100000
+ 0x0 0xfd800000 0x0 0x00010000
+ 0x0 0xfd810000 0x0 0x00001000>;
+ reg-names = "config", "controller", "dbi";
+ bus-range = <0 255>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0x00 0 0 7>;
+ interrupt-map = <0x0000 0 0 1 &gic_main GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+ ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a6137df3f0e..d555beb794bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12205,6 +12205,7 @@ PCIE DRIVER FOR ANNAPURNA LABS
M: Jonathan Chocron <jonnyc@amazon.com>
L: linux-pci@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/pci/pcie-al.txt
F: drivers/pci/controller/dwc/pcie-al.c
PCIE DRIVER FOR AMLOGIC MESON
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Chocron <jonnyc@amazon.com>
To: lorenzo.pieralisi@arm.com, bhelgaas@google.com,
jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: dwmw@amazon.co.uk, benh@kernel.crashing.org, alisaidi@amazon.com,
ronenk@amazon.com, barakw@amazon.com, talel@amazon.com,
hanochu@amazon.com, hhhawa@amazon.com, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
jonnyc@amazon.com
Subject: [PATCH 5/8] dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
Date: Thu, 11 Jul 2019 17:45:41 +0300 [thread overview]
Message-ID: <20190710164519.17883-6-jonnyc@amazon.com> (raw)
In-Reply-To: <20190710164519.17883-1-jonnyc@amazon.com>
Document Amazon's Annapurna Labs PCIe host bridge.
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
---
.../devicetree/bindings/pci/pcie-al.txt | 45 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/pcie-al.txt
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
new file mode 100644
index 000000000000..d92cc529490e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -0,0 +1,45 @@
+* Amazon Annapurna Labs PCIe host bridge
+
+Annapurna Labs' PCIe Host Controller is based on the Synopsys DesignWare
+PCI core.
+It shares common functions with the PCIe DesignWare core driver and inherits
+common properties defined in Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Properties of the host controller node that differ from it are:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value should contain
+ - "amazon,al-pcie"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "config" PCIe ECAM space
+ - "controller" AL proprietary registers
+ - "dbi" Designware PCIe registers
+
+Example:
+
+ pcie-external0 {
+ compatible = "amazon,al-pcie";
+ reg = <0x0 0xfb600000 0x0 0x00100000
+ 0x0 0xfd800000 0x0 0x00010000
+ 0x0 0xfd810000 0x0 0x00001000>;
+ reg-names = "config", "controller", "dbi";
+ bus-range = <0 255>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0x00 0 0 7>;
+ interrupt-map = <0x0000 0 0 1 &gic_main GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+ ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a6137df3f0e..d555beb794bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12205,6 +12205,7 @@ PCIE DRIVER FOR ANNAPURNA LABS
M: Jonathan Chocron <jonnyc@amazon.com>
L: linux-pci@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/pci/pcie-al.txt
F: drivers/pci/controller/dwc/pcie-al.c
PCIE DRIVER FOR AMLOGIC MESON
--
2.17.1
next prev parent reply other threads:[~2019-07-11 14:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-11 14:50 [PATCH 0/8] Amazon's Annapurna Labs DT-based PCIe host controller driver Jonathan Chocron
2019-07-11 14:50 ` Jonathan Chocron
2019-07-11 14:45 ` Jonathan Chocron [this message]
2019-07-11 14:45 ` [PATCH 5/8] dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding Jonathan Chocron
2019-07-11 7:12 ` Shenhar, Talel
2019-07-11 7:12 ` Shenhar, Talel
2019-07-11 9:32 ` Lorenzo Pieralisi
2019-07-11 15:44 ` Chocron, Jonathan
2019-07-11 14:53 ` [PATCH 1/8] PCI: Add Amazon's Annapurna Labs vendor ID Jonathan Chocron
2019-07-11 14:53 ` Jonathan Chocron
2019-07-12 13:04 ` Bjorn Helgaas
2019-07-11 14:55 ` [PATCH 2/8] PCI: Add ACS quirk for Amazon Annapurna Labs root ports Jonathan Chocron
2019-07-11 14:55 ` Jonathan Chocron
2019-07-11 14:55 ` [PATCH 3/8] PCI/VPD: Add VPD release quirk for Amazon Annapurna Labs host bridge Jonathan Chocron
2019-07-11 14:55 ` Jonathan Chocron
2019-07-12 13:10 ` Bjorn Helgaas
2019-07-14 15:08 ` Chocron, Jonathan
2019-07-11 14:56 ` [PATCH 4/8] PCI: Add quirk to disable MSI support for Amazon's " Jonathan Chocron
2019-07-11 14:56 ` Jonathan Chocron
2019-07-12 13:04 ` Bjorn Helgaas
2019-07-14 15:09 ` Chocron, Jonathan
2019-07-14 22:54 ` Benjamin Herrenschmidt
2019-07-11 14:57 ` [PATCH 6/8] PCI: al: Add support for DW based driver type Jonathan Chocron
2019-07-11 14:57 ` Jonathan Chocron
2019-07-12 13:42 ` Bjorn Helgaas
2019-07-15 15:18 ` Chocron, Jonathan
2019-07-11 14:57 ` [PATCH 7/8] PCI: dw: Add validation that PCIe core is set to correct mode Jonathan Chocron
2019-07-11 14:57 ` Jonathan Chocron
2019-07-11 14:57 ` [PATCH 8/8] PCI: dw: Add support for PCI_PROBE_ONLY/PCI_REASSIGN_ALL_BUS flags Jonathan Chocron
2019-07-11 14:57 ` Jonathan Chocron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190710164519.17883-6-jonnyc@amazon.com \
--to=jonnyc@amazon.com \
--cc=alisaidi@amazon.com \
--cc=barakw@amazon.com \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw@amazon.co.uk \
--cc=gustavo.pimentel@synopsys.com \
--cc=hanochu@amazon.com \
--cc=hhhawa@amazon.com \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
--cc=talel@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.