From: Vladimir Oltean <olteanv@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/9] NXP LS1021A-TSN Board
Date: Sun, 14 Jul 2019 03:16:52 +0300 [thread overview]
Message-ID: <20190714001701.2781-1-olteanv@gmail.com> (raw)
This patchset adds initial support for the NXP LS1021A-TSN board,
an evaluation platform built in partnership with VVDN/Argonboards
for some IEEE 802.1 TSN features.
It features a cleaned-up U-Boot board support taken from OpenIL,
as well as an eTSEC migration to DM_ETH. I picked up Bin Meng's
patch that converts the LS1021A-TWR (different board, same SoC):
https://lists.denx.de/pipermail/u-boot/2018-May/330096.html
verified it on the LS1021A-TSN board I am submitting, and made a
few adjustments where necessary.
TODO items:
- Make the eTSEC driver support fixed-link interfaces (necessary
for the enet2 <-> sja1105 internal port)
- Add driver for SJA1105 switch
- Potentially migrate the eTSEC MDIO bus driver to DM_MDIO and
expose the TBI PHY to mdio commands (useful for debugging),
once https://lists.denx.de/pipermail/u-boot/2019-June/371563.html
is merged.
Bin Meng (1):
arm: ls1021atwr: Convert to use driver model TSEC driver
Jianchao Wang (1):
Add support for the NXP LS1021A-TSN board
Vladimir Oltean (7):
net: tsec: Refactor the readout of the tbi-handle property
net: tsec: Fix offset of MDIO registers for DM_ETH
net: tsec: Reverse Christmas tree notation
net: tsec: Make errors visible
net: tsec: Common handling of MAC station address for DM_ETH
net: tsec: Change compatible strings to match Linux
configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
arch/arm/Kconfig | 14 +
arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +-
arch/arm/cpu/armv7/ls102xa/fdt.c | 10 +
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/ls1021a-tsn.dts | 77 +++++
arch/arm/dts/ls1021a-twr.dtsi | 32 ++
arch/arm/dts/ls1021a.dtsi | 30 +-
board/freescale/ls1021atsn/Kconfig | 18 ++
board/freescale/ls1021atsn/MAINTAINERS | 8 +
board/freescale/ls1021atsn/Makefile | 3 +
board/freescale/ls1021atsn/README.rst | 97 ++++++
board/freescale/ls1021atsn/ls1021atsn.c | 259 ++++++++++++++++
board/freescale/ls1021atsn/ls102xa_pbi.cfg | 15 +
board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg | 8 +
board/freescale/ls1021atwr/ls1021atwr.c | 38 ---
configs/ls1021atsn_qspi_defconfig | 77 +++++
configs/ls1021atsn_sdcard_defconfig | 86 ++++++
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 +
configs/ls1021atwr_nor_defconfig | 2 +
configs/ls1021atwr_nor_lpuart_defconfig | 2 +
configs/ls1021atwr_qspi_defconfig | 2 +
...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 +
configs/ls1021atwr_sdcard_ifc_defconfig | 2 +
configs/ls1021atwr_sdcard_qspi_defconfig | 2 +
doc/device-tree-bindings/net/fsl-tsec-phy.txt | 4 +-
drivers/net/tsec.c | 59 ++--
include/configs/ls1021atsn.h | 289 ++++++++++++++++++
include/configs/ls1021atwr.h | 30 +-
include/tsec.h | 4 +-
29 files changed, 1069 insertions(+), 107 deletions(-)
create mode 100644 arch/arm/dts/ls1021a-tsn.dts
create mode 100644 board/freescale/ls1021atsn/Kconfig
create mode 100644 board/freescale/ls1021atsn/MAINTAINERS
create mode 100644 board/freescale/ls1021atsn/Makefile
create mode 100644 board/freescale/ls1021atsn/README.rst
create mode 100644 board/freescale/ls1021atsn/ls1021atsn.c
create mode 100644 board/freescale/ls1021atsn/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg
create mode 100644 configs/ls1021atsn_qspi_defconfig
create mode 100644 configs/ls1021atsn_sdcard_defconfig
create mode 100644 include/configs/ls1021atsn.h
--
2.17.1
next reply other threads:[~2019-07-14 0:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-14 0:16 Vladimir Oltean [this message]
2019-07-14 0:16 ` [U-Boot] [PATCH v2 1/9] net: tsec: Refactor the readout of the tbi-handle property Vladimir Oltean
2019-07-14 0:16 ` [U-Boot] [PATCH v2 2/9] net: tsec: Fix offset of MDIO registers for DM_ETH Vladimir Oltean
2019-07-14 2:07 ` Bin Meng
2019-07-14 0:16 ` [U-Boot] [PATCH v2 3/9] net: tsec: Reverse Christmas tree notation Vladimir Oltean
2019-07-14 0:16 ` [U-Boot] [PATCH v2 4/9] net: tsec: Make errors visible Vladimir Oltean
2019-07-14 0:16 ` [U-Boot] [PATCH v2 5/9] net: tsec: Common handling of MAC station address for DM_ETH Vladimir Oltean
2019-07-14 0:16 ` [U-Boot] [PATCH v2 6/9] net: tsec: Change compatible strings to match Linux Vladimir Oltean
2019-07-14 2:08 ` Bin Meng
2019-07-14 0:16 ` [U-Boot] [PATCH v2 7/9] arm: ls1021atwr: Convert to use driver model TSEC driver Vladimir Oltean
2019-07-14 0:17 ` [U-Boot] [PATCH v2 8/9] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot Vladimir Oltean
2019-07-15 18:49 ` Joe Hershberger
2019-07-14 0:17 ` [U-Boot] [PATCH v2 9/9] Add support for the NXP LS1021A-TSN board Vladimir Oltean
2019-07-14 2:09 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190714001701.2781-1-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.