All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Emil Renner Berthing <kernel-sKpHZLTYfq0@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts
Date: Mon, 15 Jul 2019 09:31:48 -0400	[thread overview]
Message-ID: <20190715133550.1772-7-sashal@kernel.org> (raw)
In-Reply-To: <20190715133550.1772-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

From: Emil Renner Berthing <kernel-sKpHZLTYfq0@public.gmane.org>

[ Upstream commit 47300728fb213486a830565d2af49da967c9d16a ]

This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.

It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.

Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.

However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."

So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.

Fixes: dcfc861d24ec ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel-sKpHZLTYfq0@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-rockchip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 9b91188a85f9..2cc6d9951b52 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -417,7 +417,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
 			.direction = DMA_MEM_TO_DEV,
 			.dst_addr = rs->dma_addr_tx,
 			.dst_addr_width = rs->n_bytes,
-			.dst_maxburst = rs->fifo_len / 2,
+			.dst_maxburst = rs->fifo_len / 4,
 		};
 
 		dmaengine_slave_config(master->dma_tx, &txconf);
@@ -518,7 +518,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
 	else
 		writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
 
-	writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
+	writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR);
 	writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
 	writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
 
-- 
2.20.1

WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Emil Renner Berthing <kernel@esmil.dk>,
	Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
	linux-spi@vger.kernel.org, linux-rockchip@lists.infradead.org
Subject: [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts
Date: Mon, 15 Jul 2019 09:31:48 -0400	[thread overview]
Message-ID: <20190715133550.1772-7-sashal@kernel.org> (raw)
In-Reply-To: <20190715133550.1772-1-sashal@kernel.org>

From: Emil Renner Berthing <kernel@esmil.dk>

[ Upstream commit 47300728fb213486a830565d2af49da967c9d16a ]

This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.

It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.

Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.

However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."

So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.

Fixes: dcfc861d24ec ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-rockchip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 9b91188a85f9..2cc6d9951b52 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -417,7 +417,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
 			.direction = DMA_MEM_TO_DEV,
 			.dst_addr = rs->dma_addr_tx,
 			.dst_addr_width = rs->n_bytes,
-			.dst_maxburst = rs->fifo_len / 2,
+			.dst_maxburst = rs->fifo_len / 4,
 		};
 
 		dmaengine_slave_config(master->dma_tx, &txconf);
@@ -518,7 +518,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
 	else
 		writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
 
-	writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
+	writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR);
 	writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
 	writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
 
-- 
2.20.1


  parent reply	other threads:[~2019-07-15 13:31 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-15 13:31 [PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it Sasha Levin
2019-07-15 13:31 ` Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 002/249] ath10k: htt: don't use txdone_fifo with SDIO Sasha Levin
2019-07-15 13:31   ` Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 003/249] ath10k: fix incorrect multicast/broadcast rate setting Sasha Levin
2019-07-15 13:31   ` Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 004/249] ath9k: Don't trust TX status TID number when reporting airtime Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 005/249] wil6210: fix potential out-of-bounds read Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 006/249] ath10k: Do not send probe response template for mesh Sasha Levin
2019-07-15 13:31   ` Sasha Levin
     [not found] ` <20190715133550.1772-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2019-07-15 13:31   ` Sasha Levin [this message]
2019-07-15 13:31     ` [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 008/249] ath9k: Check for errors when reading SREV register Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 009/249] ath10k: Fix the wrong value of enums for wmi tlv stats id Sasha Levin
2019-07-15 13:31   ` Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 010/249] wil6210: fix missed MISC mbox interrupt Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 011/249] ath6kl: add some bounds checking Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 012/249] ath10k: add peer id check in ath10k_peer_find_by_id Sasha Levin
2019-07-15 13:31   ` Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 013/249] x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 014/249] wil6210: fix spurious interrupts in 3-msi Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 015/249] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 016/249] ath10k: Fix encoding for protected management frames Sasha Levin
2019-07-15 13:31   ` Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 017/249] regmap: debugfs: Fix memory leak in regmap_debugfs_init Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 018/249] batman-adv: fix for leaked TVLV handler Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 019/249] media: dvb: usb: fix use after free in dvb_usb_device_exit Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 020/249] media: spi: IR LED: add missing of table registration Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 021/249] crypto: talitos - fix skcipher failure due to wrong output IV Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 022/249] media: ov7740: avoid invalid framesize setting Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 023/249] media: marvell-ccic: fix DMA s/g desc number calculation Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 024/249] selftests/bpf: adjust verifier scale test Sasha Levin
  -- strict thread matches above, loose matches on Subject: below --
2019-07-15 13:42 [PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it Sasha Levin
2019-07-15 13:42 ` [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190715133550.1772-7-sashal@kernel.org \
    --to=sashal-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=kernel-sKpHZLTYfq0@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.