* [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read
@ 2019-07-15 13:38 Sasha Levin
2019-07-15 13:38 ` Sasha Levin
0 siblings, 1 reply; 4+ messages in thread
From: Sasha Levin @ 2019-07-15 13:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Gustavo A. R. Silva, Maya Erez, Kalle Valo, Sasha Levin,
linux-wireless, wil6210, netdev
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
[ Upstream commit bfabdd6997323adbedccb13a3fed1967fb8cf8f5 ]
Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:
enum gro_result {
GRO_MERGED,
GRO_MERGED_FREE,
GRO_HELD,
GRO_NORMAL,
GRO_DROP,
GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;
In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:
wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
len, gro_res_str[rc]);
Fix this by adding element "GRO_CONSUMED" to array gro_res_str.
Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b5055 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/txrx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 389c718cd257..16750056b8b5 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -732,6 +732,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
[GRO_HELD] = "GRO_HELD",
[GRO_NORMAL] = "GRO_NORMAL",
[GRO_DROP] = "GRO_DROP",
+ [GRO_CONSUMED] = "GRO_CONSUMED",
};
if (ndev->features & NETIF_F_RXHASH)
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH AUTOSEL 4.14 002/105] ath10k: Do not send probe response template for mesh
2019-07-15 13:38 [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read Sasha Levin
@ 2019-07-15 13:38 ` Sasha Levin
0 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-07-15 13:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, linux-wireless, ath10k, Kalle Valo,
Surabhi Vishnoi
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]
Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to
firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index cdcfb175ad9b..58a3c42c4aed 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1611,6 +1611,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
--
2.20.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH AUTOSEL 4.14 002/105] ath10k: Do not send probe response template for mesh
@ 2019-07-15 13:38 ` Sasha Levin
0 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-07-15 13:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Surabhi Vishnoi, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]
Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to
firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index cdcfb175ad9b..58a3c42c4aed 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1611,6 +1611,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read
@ 2019-07-15 14:26 Sasha Levin
0 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-07-15 14:26 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Gustavo A. R. Silva, Maya Erez, Kalle Valo, Sasha Levin,
linux-wireless, wil6210, netdev
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
[ Upstream commit bfabdd6997323adbedccb13a3fed1967fb8cf8f5 ]
Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:
enum gro_result {
GRO_MERGED,
GRO_MERGED_FREE,
GRO_HELD,
GRO_NORMAL,
GRO_DROP,
GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;
In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:
wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
len, gro_res_str[rc]);
Fix this by adding element "GRO_CONSUMED" to array gro_res_str.
Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b5055 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/txrx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 389c718cd257..16750056b8b5 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -732,6 +732,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
[GRO_HELD] = "GRO_HELD",
[GRO_NORMAL] = "GRO_NORMAL",
[GRO_DROP] = "GRO_DROP",
+ [GRO_CONSUMED] = "GRO_CONSUMED",
};
if (ndev->features & NETIF_F_RXHASH)
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-15 14:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-07-15 13:38 [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read Sasha Levin
2019-07-15 13:38 ` [PATCH AUTOSEL 4.14 002/105] ath10k: Do not send probe response template for mesh Sasha Levin
2019-07-15 13:38 ` Sasha Levin
-- strict thread matches above, loose matches on Subject: below --
2019-07-15 14:26 [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read Sasha Levin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.